Update CHANGES file.

add an include guard to config.h

.gitignore

@@ -0,0 +1,2 @@
+build/**
+include/tins/config.h

AUTHORS

@@ -1,2 +1,9 @@
-Matias Fontanini - matias.fontanini@gmail.com
-Santiago Alessandri - salessandri@nasel.com.ar
+# Below is a list of people and organizations that have contributed source
+# code to libtins. Names are listed using the following format:
+#
+# Name/Organization <email address>
+
+Matias Fontanini <matias.fontanini@gmail.com>
+Santiago Alessandri <san.lt.ss@gmail.com>
+Bruno Nery <brunonery@brunonery.com>
+Piotr Haber <piotr.haber@sens.us>

CHANGES

@@ -1,3 +1,303 @@
+v3.2
+
+- Added include guard for config.h.
+
+- The functor used on BaseSniffer::sniff_loop can now take a Packet.
+
+- Added mcs, tx_flags, ext and data_retries options to RadioTap.
+
+- Fixed big endian representation of RadioTap header.
+
+- RadioTap's dbm_signal and dbm_noise are now signed.
+
+- RadioTap now throws if an option is not present when getting
+its value.
+
+- TKIP decryption now works correctly on packets from AP to STA.
+
+- Added support for PKTAP header.
+
+- Fixed endian issue on IPv4Address::ip_to_int on Windows.
+
+- Fixed IP parsing when total length is 0 due to TCP segmentation offload.
+
+- Re-added support for pkg-config.
+
+- TCPStreamFollower now calls PDU::find_pdu instead of PDU::rfind_pdu.
+
+- Fixed assertion throw caused by DNS parsing on Windows on debug mode.
+
+- Added throw on BSD when trying to send_recv L3 packets.
+
+- Added Loopback::matches_response.
+
+- Removed obsolete autotools files.
+
+- Fixed exception thrown when an interface didn't have an IP address 
+on NetworkInterface.
+
+- Added NetworkInterface::is_loopback.
+
+- Moved all headers to the directory include/tins.
+
+- Fixed compilation warning on TCPStramFollower due to signed to unsigned
+conversion on integral constant.
+
+- BaseSniffer::get_pcap_handle is now public.
+
+- PPPoE session packets are now parsed correctly.
+
+- Fixed invalid Loopback protocol detection on FreeBSD/OSX.
+
+- Fixed OSX IP packet sending issue.
+
+- Added useful constructors to RawPDU.
+
+- Fixed compilation errors on FreeBSD.
+
+- Improved documentation on several classes.
+
+- Fixed parsing bug when allocating IP over IP packets.
+
+- Fixed Windows network interface naming.
+
+- Utils::network_interface returns pcap compatible names on Windows.
+
+- NetworkInterface::name now works on Windows.
+
+- Added documentation generation through the build system.
+
+- Added SnifferConfiguration class.
+
+- Fixed bug on Dot3 serialization.
+
+- Added OfflinePacketFilter class.
+
+- Renamed NOEXCEPT macro to TINS_NOEXCEPT.
+
+- Added DataLinkType class.
+
+- IPv4Address now uses inet_pton when constructing from string. 
+
+v3.1 - Sun Aug 24 21:39:43 ART 2014
+
+- Fixed ICMPv6 checksum error on serialization.
+
+- Fixed empty domain name encoding on DNS.
+
+- Changed the build system to CMake.
+
+v3.0 - Thu Aug  7 21:39:09 ART 2014
+
+- Timestamps can now be constructed from std::chrono::duration.
+
+- Packets can now be constructed from a PDU pointer and take ownership
+of it.
+
+- All protocols now set the next layer protocol flag, regardless if 
+it was already set. This was not done in some protocols, 
+like EthernetII, and as a consequence if the network layer protocol
+was replaced by other, the packet would be serialized incorrectly.
+
+- Fixed invalid parsing of some unknown DNS records.
+
+- Fixed unaligned memory accesses that were not supported under
+ARMv4 and ARMv5.
+
+- Added BaseSniffer::set_extract_raw_pdus.
+
+- Reduced minimum automake version to 1.11.
+
+- Added Utils::to_string(PDU::PDUType).
+
+- Fixed error compilations on Windows.
+
+- Fixed ICMPv6 checksum calculation.
+
+- Added method in IP and TCP to emplace an option (C++11 only).
+
+- Added small option optimization to PDUOption.
+
+- Fixed error compilation on RSNInformation.
+
+- Renamed ICMP::check to ICMP::checksum.
+
+- Added Sniffer support to set interface to promiscuous mode.
+
+- TCPStreamFollower now handles overlapping fragments correctly.
+
+- Fixed bugs in TCPStreamFollower which didn't allow it to follow
+stream correctly.
+
+- TCPStreamFollower now doesn't clear its state after every call to
+TCPStreamFollower::follow_streams.
+
+- Added IPv6 flag check to pdu_flag_to_ip_type.
+
+- Added DHCP::hostname to extract the hostname options.
+
+- Removed extra qualifier on SessionKeys::decrypt_unicast which 
+produced compilation errors on some platforms.
+
+- PacketSender::send now uses PDU::matches_flag to match specific
+PDU types.
+
+- Removed 'no newline at end of file' warnings.
+
+- Fixed bug when calling BIOCIMMEDIATE on *BSD.
+
+- Fixed bug on PacketSender::send_recv which didn't work under *BSD.
+
+- Fixed bug triggered by not including the string header.
+
+v2.0 - Thu Jan 23 11:09:38 ART 2014 
+
+- DNSResourceRecord was removed. Now DNS records are added using 
+DNS::Resource.
+
+- tins.h now includes ppi.h.
+
+- Done significant improvements in the speed of DNS parsing.
+
+- Added PDUOption<>::to<> which converts a PDUOption to a specific type.
+
+- Layer 3 packets sent using PacketSender::send_recv for which the 
+answer is a different PDU type.
+
+- ICMP::gateway now uses IPv4Address.
+
+- Added support for ICMP address mask request/reply.
+
+- Fixed bug in PacketSender when using send_recv and a layer 2 PDU. The 
+interface in which the packet was sent was not the default_interface 
+set when the sender was constructed.
+
+- IP packets sent using PacketSender::send_recv now match ICMP 
+responses.
+
+- Added support for ICMP timestamp request/reply packets. 
+ICMP::matches_response now works with these types of packets as well.
+
+- Added support for reassembling of fragmented IP packets via the
+IPv4Reassembler class.
+
+- Fragmented IP packet's inner_pdu PDUs are not decoded now.
+
+- Added 1000ms as the default read timeout used when calling 
+pcap_open_live. Added BaseSniffer::set_timeout to modify this parameter.
+
+- Added the --disable-dot11 configure switch.
+
+- Added support for IPSec.
+
+- Fixed bug triggered when ifaddrs::ifa_addr was null in 
+NetworkInterface::addresses.
+
+- Added another overload of Utils::route_entries which returns the
+result either than storing it in a parameter.
+
+- Added ARP monitor, WPS detector, DNS queries sniffer and DNS spoofer 
+examples.
+
+- Added another Sniffer constructor which doesn't expect the maximum
+capture size.
+
+- Added tins_cast as a replacement for dynamic_cast on PDUs.
+
+v1.2 - Mon oct  7 23:33:49 ART 2013
+
+- Added BaseSniffer::begin and BaseSniffer::end.
+
+- BaseSniffer::next_packet uses pcap_loop instead of pcap_next, which
+doesn't work well on some linux distributions.
+
+- Added PPI PDU class.
+
+- Fixed a bug in EthernetII triggered when the size of the whole frame 
+was lower than 60 bytes.
+
+- Added AddressRange class and IPv4Address, IPv6Address and 
+HWAddress<>::operator/.
+
+- Added is_broadcast, is_multicast and is_unicast to IPv4, IPv6
+and HWAddress.
+
+- Added is_private and is_loopback methods to IPv4 and IPv6 addresses.
+
+- Done some optimizations on TCP's constructor from buffer.
+
+- Added helper functions to Dot11Data to retrieve the source, 
+destination and BSSID addresses.
+
+- Fixed bugs in DNS triggered when parsing MX and unknown records.
+
+- BaseSniffer::next_packet now iterates until a valid packet is found.
+
+- TCP::get_flag is now const.
+
+- The --disable-wpa2 now works as expected.
+
+v1.1 - Wed Jun  5 09:03:37 ART 2013
+
+- Implemented std::hash specialization for IPv4, IPv6 and HWAddress<>
+types.
+
+- Added a RSNHandshakeCapturer class.
+
+- Added WPA2Decrypter class.
+
+- IEEE 802.11 frames are not parsed if the RadioTap FAILED_FCS flag 
+is on.
+
+- RadioTap now calculates its size everytime it's serialized.
+
+- Splitted the dot11.h and dot11.cpp files into several files to
+speed up compilation times.
+
+- Added HWAddress<>::is_broadcast and HWAddress::operator[].
+
+- Fixed a bug triggered when parsing Dot11QoSData frames.
+
+v1.0 - Tue Apr 23 20:40:57 ART 2013
+
+- Link layer protocol PDUs now don't hold a NetworkInterface. This led
+to changes in their constructors.
+
+- Removed the obsolete PDU* parameter taken by several classes' 
+constructors.
+
+- IP now sets the sender's address automatically when no link layer
+PDU is used.
+
+- IP, TCP and UDP now calculate the checksum everytime they're 
+serialized.
+
+- Added PDU::rfind_pdu.
+
+- Defined several exception types.
+
+- Implemented matches_response on several protocols.
+
+- PacketSender is now movable.
+
+- Added an overload of add_option that takes an rvalue-reference in IP, 
+TCP, DHCP, ICMPv6 and Dot11.
+
+- Added support for GNU/kFreeBSD.
+
+- Removed several deprecated methods, such as PDU::clone_packet.
+
+- Added PacketSender::send(PDU&, NetworkInterface).
+
+- Normalized the TLV options naming conventions in all of the classes
+that used them.
+
+- Added support for Dot1Q, STP, PPPoE protocols.
+
+- Made some important optimizations on PDUOption<>'s constructors.
+
+- Added Utils::resolve_domain and Utils::resolve_domain6
+
 v0.3 - Thu Jan 31 16:47:27 ART 2013
 
 - Added IPv6, ICMPv6 and DHCPv6 classes.

CMakeLists.txt

@@ -0,0 +1,165 @@
+CMAKE_MINIMUM_REQUIRED(VERSION 2.8.1)
+PROJECT(libtins)
+
+# Compile in release mode by default
+IF(NOT CMAKE_BUILD_TYPE)
+    MESSAGE(STATUS "Setting build type to 'RelWithDebInfo' as none was specified.")
+    SET(CMAKE_BUILD_TYPE RelWithDebInfo) 
+ELSE(NOT CMAKE_BUILD_TYPE)
+    MESSAGE(STATUS "Using specified '${CMAKE_BUILD_TYPE}' build type.")
+ENDIF(NOT CMAKE_BUILD_TYPE)
+
+# Default compilation settings
+SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
+
+# Build output checks
+OPTION(LIBTINS_BUILD_SHARED "Build libtins as a shared library." ON)
+IF(LIBTINS_BUILD_SHARED)
+    MESSAGE(
+        STATUS 
+        "Build will generate a shared library. "
+        "Use LIBTINS_BUILD_SHARED=0 to perform a static build"
+    )
+    SET(LIBTINS_TYPE SHARED)
+ELSE(LIBTINS_BUILD_SHARED)
+    MESSAGE(STATUS "Build will generate a static library.")
+    SET(LIBTINS_TYPE STATIC)
+ENDIF(LIBTINS_BUILD_SHARED)
+
+# The version number.
+SET(LIBTINS_VERSION_MAJOR 3)
+SET(LIBTINS_VERSION_MINOR 2)
+SET(LIBTINS_VERSION "${LIBTINS_VERSION_MAJOR}.${LIBTINS_VERSION_MINOR}")
+
+# Required Packages
+SET(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake/Modules/")
+
+# Look for libpcap
+FIND_PACKAGE(PCAP REQUIRED)
+
+# Set some Windows specific flags
+IF(WIN32)
+    # We need to link against these libs
+    SET(LIBTINS_OS_LIBS Ws2_32.lib Iphlpapi.lib)
+
+    # Add the NOMINMAX macro to avoid Windows' min and max macros.
+    # While compiling on windows, for some reason, WIN32 is not defined,
+    # maybe we could fix this later, but it's OK for now.
+    ADD_DEFINITIONS(-DNOMINMAX -DWIN32)
+ENDIF(WIN32)
+
+# Compilation options
+OPTION(LIBTINS_ENABLE_CXX11 "Compile libtins with c++11 features" OFF)
+IF(LIBTINS_ENABLE_CXX11)
+    SET(HAVE_CXX11 ON)
+    INCLUDE(CheckCXX11Features)
+    IF(HAS_CXX11_NULLPTR AND HAS_CXX11_RVALUE_REFERENCES)
+        MESSAGE(STATUS "Enabling C++11 features")
+        SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${CXX11_COMPILER_FLAGS}")
+    ELSE(HAS_CXX11_NULLPTR AND HAS_CXX11_RVALUE_REFERENCES)
+        MESSAGE(FATAL_ERROR "C++11 features requested but the compiler does not support them.")
+    ENDIF(HAS_CXX11_NULLPTR AND HAS_CXX11_RVALUE_REFERENCES)
+ELSE(LIBTINS_ENABLE_CXX11)
+    MESSAGE(
+        WARNING 
+        "Disabling C++11 features. Use LIBTINS_ENABLE_CXX11=1 to enable them. "
+        "Unless you are using an old compiler, you should enable this option, "
+        "as it increases the library's performance")
+ENDIF(LIBTINS_ENABLE_CXX11)
+
+OPTION(LIBTINS_ENABLE_DOT11 "Compile libtins with IEEE 802.11 support" ON)
+OPTION(LIBTINS_ENABLE_WPA2 "Compile libtins with WPA2 decryption features (requires OpenSSL)" ON)
+IF(LIBTINS_ENABLE_DOT11)
+    SET(HAVE_DOT11 ON)
+    MESSAGE(STATUS "Enabling IEEE 802.11 support.")
+    IF(LIBTINS_ENABLE_WPA2)
+        FIND_PACKAGE(OpenSSL REQUIRED)
+        SET(HAVE_WPA2_DECRYPTION ON)
+        MESSAGE(STATUS "Enabling WPA2 decryption support.")
+    ELSE(LIBTINS_ENABLE_WPA2)
+        MESSAGE(STATUS "Disabling WPA2 decryption support.")
+    ENDIF(LIBTINS_ENABLE_WPA2)
+ENDIF(LIBTINS_ENABLE_DOT11)
+
+# Add a target to generate API documentation using Doxygen
+FIND_PACKAGE(Doxygen QUIET)
+IF(DOXYGEN_FOUND)
+    CONFIGURE_FILE(
+        ${CMAKE_CURRENT_SOURCE_DIR}/docs/Doxyfile.in 
+        ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile 
+        @ONLY
+    )
+    ADD_CUSTOM_TARGET(
+        docs
+        ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile
+        WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
+        COMMENT "Generating API documentation with Doxygen" VERBATIM
+    )
+ENDIF(DOXYGEN_FOUND)
+
+SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/lib)
+SET(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/lib)
+
+# Configuration file
+CONFIGURE_FILE(
+  "${PROJECT_SOURCE_DIR}/include/tins/config.h.in"
+  "${PROJECT_SOURCE_DIR}/include/tins/config.h"
+)
+
+# Support for pkg-config
+set(CMAKE_INSTALL_LIBDIR lib)
+set(pkgconfig_prefix      ${CMAKE_INSTALL_PREFIX})
+set(pkgconfig_exec_prefix ${CMAKE_INSTALL_PREFIX})
+set(pkgconfig_libdir      ${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR})
+set(pkgconfig_version     ${LIBTINS_VERSION})
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/libtins.pc.in
+               ${CMAKE_CURRENT_BINARY_DIR}/libtins.pc @ONLY)
+
+install(
+    FILES
+    ${CMAKE_CURRENT_BINARY_DIR}/libtins.pc
+    DESTINATION ${CMAKE_INSTALL_LIBDIR}/pkgconfig
+)
+
+ENABLE_TESTING()
+ADD_SUBDIRECTORY(include)
+ADD_SUBDIRECTORY(src)
+ADD_SUBDIRECTORY(tests)
+ADD_SUBDIRECTORY(examples)
+
+# Add all targets to the build-tree export set
+EXPORT(
+    TARGETS tins
+    FILE "${PROJECT_BINARY_DIR}/libtinsTargets.cmake"
+)
+
+# Export the package for use from the build-tree
+# (this registers the build-tree with a global CMake-registry)
+EXPORT(PACKAGE libtins)
+
+# Create the libtinsConfig.cmake and libtinsConfigVersion.cmake files
+# for the build tree
+SET(CONF_INCLUDE_DIRS "${PROJECT_SOURCE_DIR}/include")
+CONFIGURE_FILE(
+    cmake/libtinsConfig.cmake.in
+    "${PROJECT_BINARY_DIR}/libtinsConfig.cmake" @ONLY
+)
+CONFIGURE_FILE(
+    cmake/libtinsConfigVersion.cmake.in
+    "${PROJECT_BINARY_DIR}/libtinsConfigVersion.cmake" @ONLY
+)
+# Install the libtinsConfig.cmake and libtinsConfigVersion.cmake
+INSTALL(
+    FILES
+    "${PROJECT_BINARY_DIR}/libtinsConfig.cmake"
+    "${PROJECT_BINARY_DIR}/libtinsConfigVersion.cmake"
+    DESTINATION CMake
+    COMPONENT dev
+)
+
+# Install the export set for use with the install-tree
+INSTALL(
+    EXPORT libtinsTargets
+    DESTINATION CMake
+    COMPONENT dev
+)

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2012, Nasel
+Copyright (c) 2012-2014, Matias Fontanini
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

Makefile.am

@@ -1,93 +0,0 @@
-AUTOMAKE_OPTIONS=subdir-objects
-ACLOCAL_AMFLAGS=${ACLOCAL_FLAGS} -I m4
-
-# pkg-config stuff
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = libtins.pc
-
-lib_LTLIBRARIES=libtins.la
-
-libtins_la_LDFLAGS = -version-info @LIBTINS_VERSION@
-
-AM_CXXFLAGS = -Wall -pedantic -I@LIBTINS_INCLUDE_DIR@
-
-libtins_la_SOURCES=src/arp.cpp \
-                    src/bootp.cpp \
-                    src/crypto.cpp \
-                    src/dhcp.cpp \
-                    src/dhcpv6.cpp \
-                    src/dns.cpp \
-                    src/dns_record.cpp \
-                    src/dot11.cpp \
-                    src/eapol.cpp \
-                    src/ethernetII.cpp \
-                    src/icmp.cpp \
-                    src/icmpv6.cpp \
-                    src/ieee802_3.cpp \
-                    src/internals.cpp \
-                    src/ip.cpp src/ip_address.cpp \
-                    src/ipv6.cpp \
-                    src/ipv6_address.cpp \
-                    src/llc.cpp \
-                    src/loopback.cpp \
-                    src/network_interface.cpp \
-                    src/packet_sender.cpp \
-                    src/packet_writer.cpp \
-                    src/pdu.cpp \
-                    src/radiotap.cpp \
-                    src/rawpdu.cpp \
-                    src/rsn_information.cpp \
-                    src/sll.cpp \
-                    src/snap.cpp \
-                    src/sniffer.cpp \
-                    src/tcp.cpp \
-                    src/tcp_stream.cpp \
-                    src/udp.cpp \
-                    src/utils.cpp 
-
-libtins_includedir = $(includedir)/tins
-libtins_include_HEADERS = include/internals.h \
-							include/dhcpv6.h \
-							include/dot11.h \
-							include/small_uint.h \
-							include/ip.h \
-							include/dns_record.h \
-							include/eapol.h \
-							include/tcp_stream.h \
-							include/ipv6.h \
-							include/icmpv6.h \
-							include/endianness.h \
-							include/rsn_information.h \
-							include/loopback.h \
-							include/ieee802_3.h \
-							include/ethernetII.h \
-							include/crypto.h \
-							include/packet.h \
-							include/llc.h \
-							include/icmp.h \
-							include/hw_address.h \
-							include/packet_writer.h \
-							include/macros.h \
-							include/arp.h \
-							include/ip_address.h \
-							include/pdu.h \
-							include/packet_sender.h \
-							include/bootp.h \
-							include/network_interface.h \
-							include/sll.h \
-							include/radiotap.h \
-							include/dns.h \
-							include/rawpdu.h \
-							include/sniffer.h \
-							include/snap.h \
-							include/pdu_cacher.h \
-							include/dhcp.h \
-							include/timestamp.h \
-							include/tcp.h \
-							include/pdu_option.h \
-							include/tins.h \
-							include/udp.h \
-							include/ipv6_address.h  \
-							include/constants.h \
-							include/utils.h \
-							include/cxxstd.h

Makefile.in

@@ -1,993 +0,0 @@
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(libtins_include_HEADERS) \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/libtins.pc.in $(top_srcdir)/configure AUTHORS THANKS \
-	TODO config.guess config.sub depcomp install-sh ltmain.sh \
-	missing
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES = libtins.pc
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" \
-	"$(DESTDIR)$(libtins_includedir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libtins_la_LIBADD =
-am__dirstamp = $(am__leading_dot)dirstamp
-am_libtins_la_OBJECTS = src/arp.lo src/bootp.lo src/crypto.lo \
-	src/dhcp.lo src/dhcpv6.lo src/dns.lo src/dns_record.lo \
-	src/dot11.lo src/eapol.lo src/ethernetII.lo src/icmp.lo \
-	src/icmpv6.lo src/ieee802_3.lo src/internals.lo src/ip.lo \
-	src/ip_address.lo src/ipv6.lo src/ipv6_address.lo src/llc.lo \
-	src/loopback.lo src/network_interface.lo src/packet_sender.lo \
-	src/packet_writer.lo src/pdu.lo src/radiotap.lo src/rawpdu.lo \
-	src/rsn_information.lo src/sll.lo src/snap.lo src/sniffer.lo \
-	src/tcp.lo src/tcp_stream.lo src/udp.lo src/utils.lo
-libtins_la_OBJECTS = $(am_libtins_la_OBJECTS)
-libtins_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
-	$(CXXFLAGS) $(libtins_la_LDFLAGS) $(LDFLAGS) -o $@
-DEFAULT_INCLUDES = -I.@am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
-SOURCES = $(libtins_la_SOURCES)
-DIST_SOURCES = $(libtins_la_SOURCES)
-DATA = $(pkgconfig_DATA)
-HEADERS = $(libtins_include_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTINS_INCLUDE_DIR = @LIBTINS_INCLUDE_DIR@
-LIBTINS_VERSION = @LIBTINS_VERSION@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = subdir-objects
-ACLOCAL_AMFLAGS = ${ACLOCAL_FLAGS} -I m4
-
-# pkg-config stuff
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = libtins.pc
-lib_LTLIBRARIES = libtins.la
-libtins_la_LDFLAGS = -version-info @LIBTINS_VERSION@
-AM_CXXFLAGS = -Wall -pedantic -I@LIBTINS_INCLUDE_DIR@
-libtins_la_SOURCES = src/arp.cpp \
-                    src/bootp.cpp \
-                    src/crypto.cpp \
-                    src/dhcp.cpp \
-                    src/dhcpv6.cpp \
-                    src/dns.cpp \
-                    src/dns_record.cpp \
-                    src/dot11.cpp \
-                    src/eapol.cpp \
-                    src/ethernetII.cpp \
-                    src/icmp.cpp \
-                    src/icmpv6.cpp \
-                    src/ieee802_3.cpp \
-                    src/internals.cpp \
-                    src/ip.cpp src/ip_address.cpp \
-                    src/ipv6.cpp \
-                    src/ipv6_address.cpp \
-                    src/llc.cpp \
-                    src/loopback.cpp \
-                    src/network_interface.cpp \
-                    src/packet_sender.cpp \
-                    src/packet_writer.cpp \
-                    src/pdu.cpp \
-                    src/radiotap.cpp \
-                    src/rawpdu.cpp \
-                    src/rsn_information.cpp \
-                    src/sll.cpp \
-                    src/snap.cpp \
-                    src/sniffer.cpp \
-                    src/tcp.cpp \
-                    src/tcp_stream.cpp \
-                    src/udp.cpp \
-                    src/utils.cpp 
-
-libtins_includedir = $(includedir)/tins
-libtins_include_HEADERS = include/internals.h \
-							include/dhcpv6.h \
-							include/dot11.h \
-							include/small_uint.h \
-							include/ip.h \
-							include/dns_record.h \
-							include/eapol.h \
-							include/tcp_stream.h \
-							include/ipv6.h \
-							include/icmpv6.h \
-							include/endianness.h \
-							include/rsn_information.h \
-							include/loopback.h \
-							include/ieee802_3.h \
-							include/ethernetII.h \
-							include/crypto.h \
-							include/packet.h \
-							include/llc.h \
-							include/icmp.h \
-							include/hw_address.h \
-							include/packet_writer.h \
-							include/macros.h \
-							include/arp.h \
-							include/ip_address.h \
-							include/pdu.h \
-							include/packet_sender.h \
-							include/bootp.h \
-							include/network_interface.h \
-							include/sll.h \
-							include/radiotap.h \
-							include/dns.h \
-							include/rawpdu.h \
-							include/sniffer.h \
-							include/snap.h \
-							include/pdu_cacher.h \
-							include/dhcp.h \
-							include/timestamp.h \
-							include/tcp.h \
-							include/pdu_option.h \
-							include/tins.h \
-							include/udp.h \
-							include/ipv6_address.h  \
-							include/constants.h \
-							include/utils.h \
-							include/cxxstd.h
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .lo .o .obj
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-libtins.pc: $(top_builddir)/config.status $(srcdir)/libtins.pc.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-src/$(am__dirstamp):
-	@$(MKDIR_P) src
-	@: > src/$(am__dirstamp)
-src/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/$(DEPDIR)
-	@: > src/$(DEPDIR)/$(am__dirstamp)
-src/arp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/bootp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/crypto.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/dhcp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/dhcpv6.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/dns.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/dns_record.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/dot11.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/eapol.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/ethernetII.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/icmp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/icmpv6.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/ieee802_3.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/internals.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/ip.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/ip_address.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/ipv6.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/ipv6_address.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/llc.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/loopback.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/network_interface.lo: src/$(am__dirstamp) \
-	src/$(DEPDIR)/$(am__dirstamp)
-src/packet_sender.lo: src/$(am__dirstamp) \
-	src/$(DEPDIR)/$(am__dirstamp)
-src/packet_writer.lo: src/$(am__dirstamp) \
-	src/$(DEPDIR)/$(am__dirstamp)
-src/pdu.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/radiotap.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/rawpdu.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/rsn_information.lo: src/$(am__dirstamp) \
-	src/$(DEPDIR)/$(am__dirstamp)
-src/sll.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/snap.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/sniffer.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/tcp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/tcp_stream.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/udp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/utils.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-libtins.la: $(libtins_la_OBJECTS) $(libtins_la_DEPENDENCIES) $(EXTRA_libtins_la_DEPENDENCIES) 
-	$(libtins_la_LINK) -rpath $(libdir) $(libtins_la_OBJECTS) $(libtins_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-	-rm -f src/arp.$(OBJEXT)
-	-rm -f src/arp.lo
-	-rm -f src/bootp.$(OBJEXT)
-	-rm -f src/bootp.lo
-	-rm -f src/crypto.$(OBJEXT)
-	-rm -f src/crypto.lo
-	-rm -f src/dhcp.$(OBJEXT)
-	-rm -f src/dhcp.lo
-	-rm -f src/dhcpv6.$(OBJEXT)
-	-rm -f src/dhcpv6.lo
-	-rm -f src/dns.$(OBJEXT)
-	-rm -f src/dns.lo
-	-rm -f src/dns_record.$(OBJEXT)
-	-rm -f src/dns_record.lo
-	-rm -f src/dot11.$(OBJEXT)
-	-rm -f src/dot11.lo
-	-rm -f src/eapol.$(OBJEXT)
-	-rm -f src/eapol.lo
-	-rm -f src/ethernetII.$(OBJEXT)
-	-rm -f src/ethernetII.lo
-	-rm -f src/icmp.$(OBJEXT)
-	-rm -f src/icmp.lo
-	-rm -f src/icmpv6.$(OBJEXT)
-	-rm -f src/icmpv6.lo
-	-rm -f src/ieee802_3.$(OBJEXT)
-	-rm -f src/ieee802_3.lo
-	-rm -f src/internals.$(OBJEXT)
-	-rm -f src/internals.lo
-	-rm -f src/ip.$(OBJEXT)
-	-rm -f src/ip.lo
-	-rm -f src/ip_address.$(OBJEXT)
-	-rm -f src/ip_address.lo
-	-rm -f src/ipv6.$(OBJEXT)
-	-rm -f src/ipv6.lo
-	-rm -f src/ipv6_address.$(OBJEXT)
-	-rm -f src/ipv6_address.lo
-	-rm -f src/llc.$(OBJEXT)
-	-rm -f src/llc.lo
-	-rm -f src/loopback.$(OBJEXT)
-	-rm -f src/loopback.lo
-	-rm -f src/network_interface.$(OBJEXT)
-	-rm -f src/network_interface.lo
-	-rm -f src/packet_sender.$(OBJEXT)
-	-rm -f src/packet_sender.lo
-	-rm -f src/packet_writer.$(OBJEXT)
-	-rm -f src/packet_writer.lo
-	-rm -f src/pdu.$(OBJEXT)
-	-rm -f src/pdu.lo
-	-rm -f src/radiotap.$(OBJEXT)
-	-rm -f src/radiotap.lo
-	-rm -f src/rawpdu.$(OBJEXT)
-	-rm -f src/rawpdu.lo
-	-rm -f src/rsn_information.$(OBJEXT)
-	-rm -f src/rsn_information.lo
-	-rm -f src/sll.$(OBJEXT)
-	-rm -f src/sll.lo
-	-rm -f src/snap.$(OBJEXT)
-	-rm -f src/snap.lo
-	-rm -f src/sniffer.$(OBJEXT)
-	-rm -f src/sniffer.lo
-	-rm -f src/tcp.$(OBJEXT)
-	-rm -f src/tcp.lo
-	-rm -f src/tcp_stream.$(OBJEXT)
-	-rm -f src/tcp_stream.lo
-	-rm -f src/udp.$(OBJEXT)
-	-rm -f src/udp.lo
-	-rm -f src/utils.$(OBJEXT)
-	-rm -f src/utils.lo
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/arp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/bootp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/crypto.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dhcp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dhcpv6.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dns.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dns_record.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dot11.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/eapol.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ethernetII.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/icmp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/icmpv6.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ieee802_3.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/internals.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ip.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ip_address.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ipv6.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ipv6_address.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/llc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/loopback.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/network_interface.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/packet_sender.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/packet_writer.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/pdu.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/radiotap.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/rawpdu.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/rsn_information.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/sll.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/snap.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/sniffer.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/tcp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/tcp_stream.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/udp.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/utils.Plo@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
-@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
-@am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
-@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
-@am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.cpp.lo:
-@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
-@am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
-@am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-	-rm -rf src/.libs src/_libs
-
-distclean-libtool:
-	-rm -f libtool config.lt
-install-pkgconfigDATA: $(pkgconfig_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
-	done
-
-uninstall-pkgconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
-install-libtins_includeHEADERS: $(libtins_include_HEADERS)
-	@$(NORMAL_INSTALL)
-	test -z "$(libtins_includedir)" || $(MKDIR_P) "$(DESTDIR)$(libtins_includedir)"
-	@list='$(libtins_include_HEADERS)'; test -n "$(libtins_includedir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libtins_includedir)'"; \
-	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libtins_includedir)" || exit $$?; \
-	done
-
-uninstall-libtins_includeHEADERS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(libtins_include_HEADERS)'; test -n "$(libtins_includedir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(libtins_includedir)'; $(am__uninstall_files_from_dir)
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS)
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(libtins_includedir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-rm -f src/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/$(am__dirstamp)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf src/$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-libtins_includeHEADERS install-pkgconfigDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf src/$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libLTLIBRARIES \
-	uninstall-libtins_includeHEADERS uninstall-pkgconfigDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-lzip dist-lzma dist-shar \
-	dist-tarZ dist-xz dist-zip distcheck distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-libLTLIBRARIES \
-	install-libtins_includeHEADERS install-man install-pdf \
-	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-libLTLIBRARIES uninstall-libtins_includeHEADERS \
-	uninstall-pkgconfigDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

README

@@ -1,58 +0,0 @@
-------------------------------------------------------------------------
-       libtins v0.3
-------------------------------------------------------------------------
-
-
--------------------------------- About ---------------------------------
-
-libtins is a C++ library for crafting, sending, sniffing and 
-interpreting raw network packets.
-
-Its main purpose is to provide the C++ developer an easy, efficient, 
-platform and endianess-independent way to create tools which need to 
-send, receive and manipulate specially crafted packets. 
-
-In order to read tutorials, examples and checkout some benchmarks which 
-show libtins' actual performance, please visit:
-
-http://libtins.sourceforge.net 
-
-------------------------------- Compiling ------------------------------
-
-In order to compile, execute:
-
-./configure
-make
-
-Note that by default, only the shared object is compiled. If you would
-like to generate a static library file as well, run:
-
-./configure --enable-static
-
-The generated static/shared library files will be located in the .libs
-directory.
-
-If you want to enable C++11 features, such as move semantics, use the
---enable-c++11 switch:
-
-./configure --enable-c++11
-
------------------------------- Installing-------------------------------
-
-Once you're done, if you want to install the header files and the 
-shared object, execute as root:
-
-make install
-
-This will install the shared object typically in /usr/local/lib. Note
-that you might have to update ldconfig's cache before using it, so 
-in order to invalidate it, you should run(as root):
-
-ldconfig
-
------------------------------- Examples --------------------------------
-
-You might want to have a look at the examples located  in the "examples"
-directory. The same samples can be found online at:
-
-http://libtins.sourceforge.net/index.php?page=examples

README.md

@@ -0,0 +1,93 @@
+libtins
+=======
+
+libtins is a high-level, multiplatform C++ network packet sniffing and 
+crafting library. 
+
+Its main purpose is to provide the C++ developer an easy, efficient, 
+platform and endianess-independent way to create tools which need to 
+send, receive and manipulate specially crafted packets. 
+
+In order to read tutorials, examples and checkout some benchmarks of the
+library, please visit:
+
+http://libtins.github.io/
+
+## Compiling ##
+
+[libtins](http://libtins.github.io/) depends on 
+[libpcap](http://www.tcpdump.org/) and 
+[openssl](http://www.openssl.org/), although the latter is not necessary 
+if some features of the library are disabled.
+
+In order to compile, execute:
+
+```Shell
+# Create the build directory
+mkdir build
+cd build
+
+# Configure the project. Add any relevant configuration flags
+cmake ../
+
+# Compile!
+make
+```
+
+Note that by default, only the shared object is compiled. If you would
+like to generate a static library file, run:
+
+```Shell
+cmake ../ -DLIBTINS_BUILD_SHARED=0
+```
+
+The generated static/shared library files will be located in the 
+_build/lib_ directory.
+
+libtins is noticeable faster if you enable _C++11_ support. Therefore, 
+if your compiler supports this standard, then you should enable it. 
+In order to do so, use the _LIBTINS_ENABLE_CXX11_ switch:
+
+```Shell
+cmake ../ -DLIBTINS_ENABLE_CXX11=1
+```
+
+If you want to disable _WPA2_ decryption support, which will remove 
+openssl as a dependency for compilation, use the 
+_LIBTINS_ENABLE_WPA2_ switch:
+
+```Shell
+cmake ../ -DLIBTINS_ENABLE_WPA2=0
+```
+
+If you want to disable IEEE 802.11 support(this will also disable 
+RadioTap and WPA2 decryption), which will reduce the size of the 
+resulting library in around 20%, use the _LIBTINS_ENABLE_DOT11_ switch:
+
+```Shell
+cmake ../ -DLIBTINS_ENABLE_DOT11=0
+```
+
+## Installing ##
+
+Once you're done, if you want to install the header files and the 
+shared object, execute as root:
+
+```Shell
+make install
+```
+
+This will install the shared object typically in _/usr/local/lib_. Note
+that you might have to update ldconfig's cache before using it, so 
+in order to invalidate it, you should run(as root):
+
+```Shell
+ldconfig
+```
+
+## Examples ##
+
+You might want to have a look at the examples located  in the "examples"
+directory. The same samples can be found online at:
+
+http://libtins.github.io/examples/

THANKS

@@ -1,7 +1,4 @@
 We'd like to thank the following people, who have been of great help
 through the development of libtins:
 
-- Bruno Nery <brunonery@brunonery.com> - For several bug reports and new 
-feature requests.
-
 - Raúl Benencia <rbenencia@gmail.com> - For creating the Debian package.

cmake/Modules/CheckCXX11Features.cmake

@@ -0,0 +1,142 @@
+# - Check which parts of the C++11 standard the compiler supports
+#
+# When found it will set the following variables
+#
+#  CXX11_COMPILER_FLAGS         - the compiler flags needed to get C++11 features
+#
+#  HAS_CXX11_AUTO               - auto keyword
+#  HAS_CXX11_AUTO_RET_TYPE      - function declaration with deduced return types
+#  HAS_CXX11_CLASS_OVERRIDE     - override and final keywords for classes and methods
+#  HAS_CXX11_CONSTEXPR          - constexpr keyword
+#  HAS_CXX11_CSTDINT_H          - cstdint header
+#  HAS_CXX11_DECLTYPE           - decltype keyword
+#  HAS_CXX11_FUNC               - __func__ preprocessor constant
+#  HAS_CXX11_INITIALIZER_LIST   - initializer list
+#  HAS_CXX11_LAMBDA             - lambdas
+#  HAS_CXX11_LIB_REGEX          - regex library
+#  HAS_CXX11_LONG_LONG          - long long signed & unsigned types
+#  HAS_CXX11_NULLPTR            - nullptr
+#  HAS_CXX11_RVALUE_REFERENCES  - rvalue references
+#  HAS_CXX11_SIZEOF_MEMBER      - sizeof() non-static members
+#  HAS_CXX11_STATIC_ASSERT      - static_assert()
+#  HAS_CXX11_VARIADIC_TEMPLATES - variadic templates
+
+#=============================================================================
+# Copyright 2011,2012 Rolf Eike Beer <eike@sf-mail.de>
+# Copyright 2012 Andreas Weis
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#
+# Each feature may have up to 3 checks, every one of them in it's own file
+# FEATURE.cpp              - example that must build and return 0 when run
+# FEATURE_fail.cpp         - example that must build, but may not return 0 when run
+# FEATURE_fail_compile.cpp - example that must fail compilation
+#
+# The first one is mandatory, the latter 2 are optional and do not depend on
+# each other (i.e. only one may be present).
+#
+
+if (NOT CMAKE_CXX_COMPILER_LOADED)
+    message(FATAL_ERROR "CheckCXX11Features modules only works if language CXX is enabled")
+endif ()
+
+cmake_minimum_required(VERSION 2.8.3)
+
+#
+### Check for needed compiler flags
+#
+include(CheckCXXCompilerFlag)
+check_cxx_compiler_flag("-std=c++11" _HAS_CXX11_FLAG)
+if (NOT _HAS_CXX11_FLAG)
+    check_cxx_compiler_flag("-std=c++0x" _HAS_CXX0X_FLAG)
+endif ()
+
+if (_HAS_CXX11_FLAG)
+    set(CXX11_COMPILER_FLAGS "-std=c++11")
+elseif (_HAS_CXX0X_FLAG)
+    set(CXX11_COMPILER_FLAGS "-std=c++0x")
+endif ()
+
+function(cxx11_check_feature FEATURE_NAME RESULT_VAR)
+    if (NOT DEFINED ${RESULT_VAR})
+        set(_bindir "${CMAKE_CURRENT_BINARY_DIR}/cxx11_${FEATURE_NAME}")
+
+        set(_SRCFILE_BASE ${CMAKE_CURRENT_LIST_DIR}/CheckCXX11Features/cxx11-test-${FEATURE_NAME})
+        set(_LOG_NAME "\"${FEATURE_NAME}\"")
+        message(STATUS "Checking C++11 support for ${_LOG_NAME}")
+
+        set(_SRCFILE "${_SRCFILE_BASE}.cpp")
+        set(_SRCFILE_FAIL "${_SRCFILE_BASE}_fail.cpp")
+        set(_SRCFILE_FAIL_COMPILE "${_SRCFILE_BASE}_fail_compile.cpp")
+
+        if (CROSS_COMPILING)
+            try_compile(${RESULT_VAR} "${_bindir}" "${_SRCFILE}"
+                        COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+            if (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL})
+                try_compile(${RESULT_VAR} "${_bindir}_fail" "${_SRCFILE_FAIL}"
+                            COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+            endif (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL})
+        else (CROSS_COMPILING)
+            try_run(_RUN_RESULT_VAR _COMPILE_RESULT_VAR
+                    "${_bindir}" "${_SRCFILE}"
+                    COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+            if (_COMPILE_RESULT_VAR AND NOT _RUN_RESULT_VAR)
+                set(${RESULT_VAR} TRUE)
+            else (_COMPILE_RESULT_VAR AND NOT _RUN_RESULT_VAR)
+                set(${RESULT_VAR} FALSE)
+            endif (_COMPILE_RESULT_VAR AND NOT _RUN_RESULT_VAR)
+            if (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL})
+                try_run(_RUN_RESULT_VAR _COMPILE_RESULT_VAR
+                        "${_bindir}_fail" "${_SRCFILE_FAIL}"
+                         COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+                if (_COMPILE_RESULT_VAR AND _RUN_RESULT_VAR)
+                    set(${RESULT_VAR} TRUE)
+                else (_COMPILE_RESULT_VAR AND _RUN_RESULT_VAR)
+                    set(${RESULT_VAR} FALSE)
+                endif (_COMPILE_RESULT_VAR AND _RUN_RESULT_VAR)
+            endif (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL})
+        endif (CROSS_COMPILING)
+        if (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL_COMPILE})
+            try_compile(_TMP_RESULT "${_bindir}_fail_compile" "${_SRCFILE_FAIL_COMPILE}"
+                        COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+            if (_TMP_RESULT)
+                set(${RESULT_VAR} FALSE)
+            else (_TMP_RESULT)
+                set(${RESULT_VAR} TRUE)
+            endif (_TMP_RESULT)
+        endif (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL_COMPILE})
+
+        if (${RESULT_VAR})
+            message(STATUS "Checking C++11 support for ${_LOG_NAME}: works")
+        else (${RESULT_VAR})
+            message(STATUS "Checking C++11 support for ${_LOG_NAME}: not supported")
+        endif (${RESULT_VAR})
+        set(${RESULT_VAR} ${${RESULT_VAR}} CACHE INTERNAL "C++11 support for ${_LOG_NAME}")
+    endif (NOT DEFINED ${RESULT_VAR})
+endfunction(cxx11_check_feature)
+
+cxx11_check_feature("__func__" HAS_CXX11_FUNC)
+cxx11_check_feature("auto" HAS_CXX11_AUTO)
+cxx11_check_feature("auto_ret_type" HAS_CXX11_AUTO_RET_TYPE)
+cxx11_check_feature("class_override_final" HAS_CXX11_CLASS_OVERRIDE)
+cxx11_check_feature("constexpr" HAS_CXX11_CONSTEXPR)
+cxx11_check_feature("cstdint" HAS_CXX11_CSTDINT_H)
+cxx11_check_feature("decltype" HAS_CXX11_DECLTYPE)
+cxx11_check_feature("initializer_list" HAS_CXX11_INITIALIZER_LIST)
+cxx11_check_feature("lambda" HAS_CXX11_LAMBDA)
+cxx11_check_feature("long_long" HAS_CXX11_LONG_LONG)
+cxx11_check_feature("nullptr" HAS_CXX11_NULLPTR)
+cxx11_check_feature("regex" HAS_CXX11_LIB_REGEX)
+cxx11_check_feature("rvalue-references" HAS_CXX11_RVALUE_REFERENCES)
+cxx11_check_feature("sizeof_member" HAS_CXX11_SIZEOF_MEMBER)
+cxx11_check_feature("static_assert" HAS_CXX11_STATIC_ASSERT)
+cxx11_check_feature("variadic_templates" HAS_CXX11_VARIADIC_TEMPLATES)

cmake/Modules/CheckCXX11Features/cxx11-test-__func__.cpp

@@ -0,0 +1,8 @@
+int main(void)
+{
+	if (!__func__)
+		return 1;
+	if (!(*__func__))
+		return 1;
+	return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-auto.cpp

@@ -0,0 +1,12 @@
+
+int main()
+{
+	auto i = 5;
+	auto f = 3.14159f;
+	auto d = 3.14159;
+	bool ret = (
+		(sizeof(f) < sizeof(d)) &&
+		(sizeof(i) == sizeof(int))
+	);
+	return ret ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-auto_fail_compile.cpp

@@ -0,0 +1,7 @@
+int main(void)
+{
+	// must fail because there is no initializer
+	auto i;
+
+	return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-auto_ret_type.cpp

@@ -0,0 +1,8 @@
+auto foo(int i) -> int {
+	return i - 1;
+}
+
+int main()
+{
+	return foo(1);
+}

cmake/Modules/CheckCXX11Features/cxx11-test-class_override_final.cpp

@@ -0,0 +1,21 @@
+class base {
+public:
+    virtual int foo(int a)
+     { return 4 + a; }
+    int bar(int a) final
+     { return a - 2; }
+};
+
+class sub final : public base {
+public:
+    virtual int foo(int a) override
+     { return 8 + 2 * a; };
+};
+
+int main(void)
+{
+    base b;
+    sub s;
+
+    return (b.foo(2) * 2 == s.foo(2)) ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-class_override_final_fail_compile.cpp

@@ -0,0 +1,25 @@
+class base {
+public:
+    virtual int foo(int a)
+     { return 4 + a; }
+    virtual int bar(int a) final
+     { return a - 2; }
+};
+
+class sub final : public base {
+public:
+    virtual int foo(int a) override
+     { return 8 + 2 * a; };
+    virtual int bar(int a)
+     { return a; }
+};
+
+class impossible : public sub { };
+
+int main(void)
+{
+    base b;
+    sub s;
+
+    return 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-constexpr.cpp

@@ -0,0 +1,19 @@
+constexpr int square(int x)
+{
+	return x*x;
+}
+
+constexpr int the_answer()
+{
+	return 42;
+}
+
+int main()
+{
+	int test_arr[square(3)];
+	bool ret = (
+		(square(the_answer()) == 1764) &&
+		(sizeof(test_arr)/sizeof(test_arr[0]) == 9)
+	);
+	return ret ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-cstdint.cpp

@@ -0,0 +1,11 @@
+#include <cstdint>
+
+int main()
+{
+	bool test =
+		(sizeof(int8_t) == 1) &&
+		(sizeof(int16_t) == 2) &&
+		(sizeof(int32_t) == 4) &&
+		(sizeof(int64_t) == 8);
+	return test ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-decltype.cpp

@@ -0,0 +1,10 @@
+bool check_size(int i)
+{
+	return sizeof(int) == sizeof(decltype(i));
+}
+
+int main()
+{
+	bool ret = check_size(42);
+	return ret ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-initializer_list.cpp

@@ -0,0 +1,27 @@
+#include <vector>
+
+class seq {
+public:
+    seq(std::initializer_list<int> list);
+
+    int length() const;
+private:
+    std::vector<int> m_v;
+};
+
+seq::seq(std::initializer_list<int> list)
+    : m_v(list)
+{
+}
+
+int seq::length() const
+{
+    return m_v.size();
+}
+
+int main(void)
+{
+    seq a = {18, 20, 2, 0, 4, 7};
+
+    return (a.length() == 6) ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-lambda.cpp

@@ -0,0 +1,5 @@
+int main()
+{
+	int ret = 0;
+	return ([&ret]() -> int { return ret; })();
+}

cmake/Modules/CheckCXX11Features/cxx11-test-long_long.cpp

@@ -0,0 +1,7 @@
+int main(void)
+{
+	long long l;
+	unsigned long long ul;
+
+	return ((sizeof(l) >= 8) && (sizeof(ul) >= 8)) ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-nullptr.cpp

@@ -0,0 +1,6 @@
+int main(void)
+{
+	void *v = nullptr;
+
+	return v ? 1 : 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-nullptr_fail_compile.cpp

@@ -0,0 +1,6 @@
+int main(void)
+{
+	int i = nullptr;
+
+	return 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-regex.cpp

@@ -0,0 +1,26 @@
+#include <algorithm>
+#include <regex>
+
+int parse_line(std::string const& line)
+{
+	std::string tmp;
+	if(std::regex_search(line, std::regex("(\\s)+(-)?(\\d)+//(-)?(\\d)+(\\s)+"))) {
+		tmp = std::regex_replace(line, std::regex("(-)?(\\d)+//(-)?(\\d)+"), std::string("V"));
+	} else if(std::regex_search(line, std::regex("(\\s)+(-)?(\\d)+/(-)?(\\d)+(\\s)+"))) {
+		tmp = std::regex_replace(line, std::regex("(-)?(\\d)+/(-)?(\\d)+"), std::string("V"));
+	} else if(std::regex_search(line, std::regex("(\\s)+(-)?(\\d)+/(-)?(\\d)+/(-)?(\\d)+(\\s)+"))) {
+		tmp = std::regex_replace(line, std::regex("(-)?(\\d)+/(-)?(\\d)+/(-)?(\\d)+"), std::string("V"));
+	} else {
+		tmp = std::regex_replace(line, std::regex("(-)?(\\d)+"), std::string("V"));
+	}
+	return static_cast<int>(std::count(tmp.begin(), tmp.end(), 'V'));
+}
+
+int main()
+{
+	bool test = (parse_line("f 7/7/7 -3/3/-3 2/-2/2") == 3) &&
+				(parse_line("f 7//7 3//-3 -2//2") == 3) &&
+				(parse_line("f 7/7 3/-3 -2/2") == 3) &&
+				(parse_line("f 7 3 -2") == 3);
+	return test ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-rvalue-references.cpp

@@ -0,0 +1,57 @@
+#include <cassert>
+
+class rvmove {
+public:
+   void *ptr;
+   char *array;
+
+   rvmove()
+    : ptr(0),
+    array(new char[10])
+   {
+     ptr = this;
+   }
+
+   rvmove(rvmove &&other)
+    : ptr(other.ptr),
+    array(other.array)
+   {
+    other.array = 0;
+    other.ptr = 0;
+   }
+
+   ~rvmove()
+   {
+    assert(((ptr != 0) && (array != 0)) || ((ptr == 0) && (array == 0)));
+    delete[] array;
+   }
+
+   rvmove &operator=(rvmove &&other)
+   {
+     delete[] array;
+     ptr = other.ptr;
+     array = other.array;
+     other.array = 0;
+     other.ptr = 0;
+     return *this;
+   }
+
+   static rvmove create()
+   {
+     return rvmove();
+   }
+private:
+  rvmove(const rvmove &);
+  rvmove &operator=(const rvmove &);
+};
+
+int main()
+{
+  rvmove mine;
+  if (mine.ptr != &mine)
+    return 1;
+  mine = rvmove::create();
+  if (mine.ptr == &mine)
+    return 1;
+  return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-sizeof_member.cpp

@@ -0,0 +1,14 @@
+struct foo {
+	char bar;
+	int baz;
+};
+
+int main(void)
+{
+	bool ret = (
+		(sizeof(foo::bar) == 1) &&
+		(sizeof(foo::baz) >= sizeof(foo::bar)) &&
+		(sizeof(foo) >= sizeof(foo::bar) + sizeof(foo::baz))
+	);
+	return ret ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-sizeof_member_fail.cpp

@@ -0,0 +1,9 @@
+struct foo {
+	int baz;
+	double bar;
+};
+
+int main(void)
+{
+	return (sizeof(foo::bar) == 4) ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-static_assert.cpp

@@ -0,0 +1,5 @@
+int main(void)
+{
+	static_assert(0 < 1, "your ordering of integers is screwed");
+	return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-static_assert_fail_compile.cpp

@@ -0,0 +1,5 @@
+int main(void)
+{
+	static_assert(1 < 0, "your ordering of integers is screwed");
+	return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-variadic_templates.cpp

@@ -0,0 +1,23 @@
+int Accumulate()
+{
+	return 0;
+}
+
+template<typename T, typename... Ts>
+int Accumulate(T v, Ts... vs)
+{
+	return v + Accumulate(vs...);
+}
+
+template<int... Is>
+int CountElements()
+{
+	return sizeof...(Is);
+}
+
+int main()
+{
+	int acc = Accumulate(1, 2, 3, 4, -5);
+	int count = CountElements<1,2,3,4,5>();
+	return ((acc == 5) && (count == 5)) ? 0 : 1;
+}

cmake/Modules/FindPCAP.cmake

@@ -0,0 +1,74 @@
+# - Try to find libpcap include dirs and libraries
+#
+# Usage of this module as follows:
+#
+#     find_package(PCAP)
+#
+# Variables used by this module, they can change the default behaviour and need
+# to be set before calling find_package:
+#
+#  PCAP_ROOT_DIR             Set this variable to the root installation of
+#                            libpcap if the module has problems finding the
+#                            proper installation path.
+#
+# Variables defined by this module:
+#
+#  PCAP_FOUND                System has libpcap, include and library dirs found
+#  PCAP_INCLUDE_DIR          The libpcap include directories.
+#  PCAP_LIBRARY              The libpcap library (possibly includes a thread
+#                            library e.g. required by pf_ring's libpcap)
+#  HAVE_PF_RING              If a found version of libpcap supports PF_RING
+
+find_path(PCAP_ROOT_DIR
+    NAMES include/pcap.h
+)
+
+find_path(PCAP_INCLUDE_DIR
+    NAMES pcap.h
+    HINTS ${PCAP_ROOT_DIR}/include
+)
+
+find_library(PCAP_LIBRARY
+    NAMES pcap wpcap
+    HINTS ${PCAP_ROOT_DIR}/lib
+)
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(PCAP DEFAULT_MSG
+    PCAP_LIBRARY
+    PCAP_INCLUDE_DIR
+)
+
+include(CheckCXXSourceCompiles)
+set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LIBRARY})
+check_cxx_source_compiles("int main() { return 0; }" PCAP_LINKS_SOLO)
+set(CMAKE_REQUIRED_LIBRARIES)
+
+# check if linking against libpcap also needs to link against a thread library
+if (NOT PCAP_LINKS_SOLO)
+    find_package(Threads)
+    if (THREADS_FOUND)
+        set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LIBRARY} ${CMAKE_THREAD_LIBS_INIT})
+        check_cxx_source_compiles("int main() { return 0; }" PCAP_NEEDS_THREADS)
+        set(CMAKE_REQUIRED_LIBRARIES)
+    endif (THREADS_FOUND)
+    if (THREADS_FOUND AND PCAP_NEEDS_THREADS)
+        set(_tmp ${PCAP_LIBRARY} ${CMAKE_THREAD_LIBS_INIT})
+        list(REMOVE_DUPLICATES _tmp)
+        set(PCAP_LIBRARY ${_tmp}
+            CACHE STRING "Libraries needed to link against libpcap" FORCE)
+    else (THREADS_FOUND AND PCAP_NEEDS_THREADS)
+        message(FATAL_ERROR "Couldn't determine how to link against libpcap")
+    endif (THREADS_FOUND AND PCAP_NEEDS_THREADS)
+endif (NOT PCAP_LINKS_SOLO)
+
+include(CheckFunctionExists)
+set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LIBRARY})
+check_function_exists(pcap_get_pfring_id HAVE_PF_RING)
+set(CMAKE_REQUIRED_LIBRARIES)
+
+mark_as_advanced(
+    PCAP_ROOT_DIR
+    PCAP_INCLUDE_DIR
+    PCAP_LIBRARY
+)

cmake/libtinsConfig.cmake.in

@@ -0,0 +1,16 @@
+# - Config file for the libtins package
+# It defines the following variables
+#  LIBTINS_INCLUDE_DIRS - include directories for libtins
+#  LIBTINS_LIBRARIES    - libraries to link against
+
+# Compute paths
+get_filename_component(LIBTINS_CMAKE_DIR "${CMAKE_CURRENT_LIST_FILE}" PATH)
+set(LIBTINS_INCLUDE_DIRS "@CONF_INCLUDE_DIRS@")
+
+# Our library dependencies (contains definitions for IMPORTED targets)
+if(NOT TARGET libtins AND NOT LIBTINS_BINARY_DIR)
+    include("${LIBTINS_CMAKE_DIR}/libtinsTargets.cmake")
+endif()
+
+# These are IMPORTED targets created by libtinsTargets.cmake
+set(LIBTINS_LIBRARIES tins)

cmake/libtinsConfigVersion.cmake.in

@@ -0,0 +1,11 @@
+set(PACKAGE_VERSION "@LIBTINS_VERSION@")
+
+# Check whether the requested PACKAGE_FIND_VERSION is compatible
+if("${PACKAGE_VERSION}" VERSION_LESS "${PACKAGE_FIND_VERSION}")
+    set(PACKAGE_VERSION_COMPATIBLE FALSE)
+else()
+    set(PACKAGE_VERSION_COMPATIBLE TRUE)
+    if ("${PACKAGE_VERSION}" VERSION_EQUAL "${PACKAGE_FIND_VERSION}")
+        set(PACKAGE_VERSION_EXACT TRUE)
+    endif()
+endif()

configure.ac

@@ -1,59 +0,0 @@
-AC_INIT([libtins], [0.3], [matias.fontanini@gmail.com], [libtins], [http://libtins.sourceforge.net])
-AM_INIT_AUTOMAKE([-Wall -Werror foreign])
-LT_INIT([disable-static])
-AC_CONFIG_MACRO_DIR([m4])
-AM_MAINTAINER_MODE([enable])
-
-AC_PROG_CXX
-AC_LANG(C++)
-
-AC_PROG_LIBTOOL
-
-if test -n "$debug"
-then
-    CXXFLAGS="$CXXFLAGS -DTINS_DEBUG -g"
-else
-    CXXFLAGS="$CXXFLAGS -O3"
-fi
-
-CXXFLAGS="$CXXFLAGS -Iinclude"
-
-AC_ARG_ENABLE(
-    c++11, 
-    [  --enable-c++11          enable C++11 features], 
-    [CXXFLAGS="$CXXFLAGS -std=c++0x"]
-)
-
-# Check that libpcap exists
-
-# Get libpcap library and include locations
-
-AC_ARG_WITH([pcap-include-path],
-  [AS_HELP_STRING([--with-pcap-include-path],
-    [location of the libpcap headers, defaults to /usr/include/pcap])],
-  [CXXFLAGS="$CXXFLAGS -I$withval"; CPPFLAGS="-I$withval"])
-
-AC_ARG_WITH([pcap-lib-path],
-  [AS_HELP_STRING([--with-pcap-lib-path], [location of the libpcap libraries])],
-  [LIBS="$LIBS -L$withval"])
-
-AC_CHECK_LIB(pcap, pcap_loop, [], [AC_MSG_ERROR([pcap library is missing!])])
-
-old_cppflags=$CPPFLAGS
-CPPFLAGS=""
-
-# Headers
-
-LIBTINS_INCLUDE_DIR="include"
-AC_CHECK_HEADERS([pcap.h], [], [AC_MSG_ERROR([libpcap headers are missing!])])
-
-CPPFLAGS=$old_cppflags
-
-# Substitute options
-
-AC_SUBST(CXXFLAGS)
-AC_SUBST(LIBS)
-AC_SUBST(LIBTINS_INCLUDE_DIR)
-AC_SUBST([LIBTINS_VERSION], [0:3:0])
-AC_CONFIG_FILES([Makefile libtins.pc])
-AC_OUTPUT

depcomp

@@ -1,688 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2011-12-04.11; # UTC
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputting dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
-   # This is just like msvc7 but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvc7
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.  hp depmode also adds that space, but also prefixes the VPATH
-## to the object.  Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-      | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
-    echo >> "$depfile"
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$base.u
-    tmpdepfile3=$dir.libs/$base.u
-    "$@" -Wc,-M
-  else
-    tmpdepfile1=$dir$base.u
-    tmpdepfile2=$dir$base.u
-    tmpdepfile3=$dir$base.u
-    "$@" -M
-  fi
-  stat=$?
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-    exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-msvc7)
-  if test "$libtool" = yes; then
-    showIncludes=-Wc,-showIncludes
-  else
-    showIncludes=-showIncludes
-  fi
-  "$@" $showIncludes > "$tmpdepfile"
-  stat=$?
-  grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  # The first sed program below extracts the file names and escapes
-  # backslashes for cygpath.  The second sed program outputs the file
-  # name when reading, but also accumulates all include files in the
-  # hold buffer in order to output them again at the end.  This only
-  # works with sed implementations that can handle large buffers.
-  sed < "$tmpdepfile" -n '
-/^Note: including file:  *\(.*\)/ {
-  s//\1/
-  s/\\/\\\\/g
-  p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/	\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
-  s/.*/	/
-  G
-  p
-}' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvc7msys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no eat=no
-  for arg
-  do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    if test $eat = yes; then
-      eat=no
-      continue
-    fi
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -arch)
-      eat=yes ;;
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix=`echo "$object" | sed 's/^.*\././'`
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  # makedepend may prepend the VPATH from the source file name to the object.
-  # No need to regex-escape $object, excess matching of '.' is harmless.
-  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test "X$1" != 'X--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E 2>/dev/null |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvcmsys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:

docs/Doxyfile.in

@@ -31,14 +31,14 @@ PROJECT_NAME           = libtins
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 0.3
+PROJECT_NUMBER         = @LIBTINS_VERSION@
 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
 # base path where the generated documentation will be put.
 # If a relative path is entered, it will be relative to the location
 # where doxygen was started. If left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       = docs/
+OUTPUT_DIRECTORY       = @CMAKE_CURRENT_BINARY_DIR@/docs/
 
 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
 # 4096 sub-directories (in 2 levels) under the output directory of each output
@@ -581,7 +581,7 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-INPUT                  = include src
+INPUT                  = @CMAKE_CURRENT_SOURCE_DIR@/include @CMAKE_CURRENT_SOURCE_DIR@/src @CMAKE_CURRENT_SOURCE_DIR@/docs/mainpage.dox
 
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
@@ -1085,7 +1085,7 @@ SERVER_BASED_SEARCH    = NO
 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
 # generate Latex output.
 
-GENERATE_LATEX         = YES
+GENERATE_LATEX         = NO
 
 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be

docs/mainpage.dox

@@ -0,0 +1,29 @@
+/** 
+ * \mainpage Documentation
+ *
+ * \section intro_sec Introduction
+ *
+ * <i>libtins</i> is a high-level, multiplatform <i>C++</i> network packet 
+ * sniffing and crafting library.
+ * 
+ * Its main purpose is to provide the <i>C++</i> developer an easy, efficient, 
+ * platform and endianess-independent way to create tools which need to 
+ * send, receive and manipulate network packets.
+ *
+ * \section install_sec Installation
+ * 
+ * Please visit the <a href="http://libtins.github.io/download/">downloads
+ * section</a> in order to see the installation instructions.
+ *
+ * \section tutorials_sec Tutorials
+ *
+ * If you want to learn about how the library works, please visit the
+ * <a href="http://libtins.github.io/tutorial/">tutorials</a> section.
+ *
+ * \section examples_sec Examples
+ *
+ * Make sure to visit the <a href="http://libtins.github.io/examples/">
+ * examples</a> section to see some short but illustrative examples on how 
+ * to send and sniff packets using <i>libtins</i>.
+ *
+ */

examples/CMakeLists.txt

@@ -0,0 +1,58 @@
+FIND_PACKAGE(libtins QUIET)
+FIND_PACKAGE(Threads QUIET)
+
+IF(libtins_FOUND)
+    SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/examples)
+    INCLUDE_DIRECTORIES(${LIBTINS_INCLUDE_DIRS})
+    LINK_LIBRARIES(${LIBTINS_LIBRARIES})
+
+    IF(HAVE_CXX11)
+        SET(LIBTINS_CXX11_EXAMPLES
+            arpmonitor
+            dns_queries
+            dns_spoof
+            dns_stats
+            wps_detect
+            traceroute
+        )
+    ELSE(HAVE_CXX11)
+        MESSAGE(WARNING "Disabling some examples since C++11 support is disabled.")
+    ENDIF(HAVE_CXX11)
+
+    ADD_CUSTOM_TARGET(
+        examples DEPENDS
+        arpspoofing
+        ${LIBTINS_CXX11_EXAMPLES}
+        beacon_display
+        portscan
+    )
+
+    ADD_EXECUTABLE(arpspoofing EXCLUDE_FROM_ALL arpspoofing.cpp)
+    IF(HAVE_CXX11)
+        ADD_EXECUTABLE(arpmonitor EXCLUDE_FROM_ALL arpmonitor.cpp)
+        ADD_EXECUTABLE(dns_queries EXCLUDE_FROM_ALL dns_queries.cpp)
+        ADD_EXECUTABLE(dns_spoof EXCLUDE_FROM_ALL dns_spoof.cpp)
+        ADD_EXECUTABLE(dns_stats EXCLUDE_FROM_ALL dns_stats.cpp)
+        ADD_EXECUTABLE(wps_detect EXCLUDE_FROM_ALL wps_detect.cpp)
+    ENDIF(HAVE_CXX11)
+
+    ADD_EXECUTABLE(beacon_display EXCLUDE_FROM_ALL beacon_display.cpp)
+
+    if(THREADS_FOUND)
+        IF(HAVE_CXX11)
+            ADD_EXECUTABLE(traceroute EXCLUDE_FROM_ALL traceroute.cpp)
+            TARGET_LINK_LIBRARIES(traceroute ${CMAKE_THREAD_LIBS_INIT})
+        ENDIF(HAVE_CXX11)
+
+        ADD_EXECUTABLE(portscan EXCLUDE_FROM_ALL portscan.cpp)
+        TARGET_LINK_LIBRARIES(portscan ${CMAKE_THREAD_LIBS_INIT})
+    ELSE(THREADS_FOUND)
+        MESSAGE(WARNING "Disabling portscan and traceroute examples since pthreads library was not found.")
+    ENDIF(THREADS_FOUND)
+ELSE(libtins_FOUND)
+    MESSAGE(
+        WARNING 
+        "Disabling examples since libtins is not installed. "
+        "Run cmake again once it is installed in order to compile them."
+    )
+ENDIF(libtins_FOUND)

examples/Makefile.in

@@ -1,28 +0,0 @@
-CXX=@CXX@
-CXXFLAGS=-Wall @CXXFLAGS@
-LDFLAGS=-ltins
-EXECUTABLES=arpspoof portscan traceroute beacon_display
-
-all: $(EXECUTABLES)
-
-compile: $(OBJECTS)
-
-recompile: clean all
-
-arpspoof: 
-	$(CXX) arpspoofing.cpp -o arpspoofing $(CXXFLAGS) $(LDFLAGS)
-
-beacon_display: 
-	$(CXX) beacon_display.cpp -o beacon_display $(CXXFLAGS) $(LDFLAGS) 	
-
-portscan:
-	$(CXX) portscan.cpp -o portscan $(CXXFLAGS) $(LDFLAGS) -lpthread
-	
-traceroute: 
-	$(CXX) traceroute.cpp -o traceroute -std=c++0x $(CXXFLAGS) $(LDFLAGS) -lpthread
-
-.cpp.o:
-	$(CXX) $(CXXFLAGS) $(INCLUDE) $< -o $@
-
-clean:
-	rm $(OBJECTS) $(EXECUTABLES)

examples/arpmonitor.cpp

@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+ 
+#include <tins/tins.h>
+#include <map>
+#include <iostream>
+#include <functional>
+
+using namespace Tins;
+
+class arp_monitor {
+public:
+    void run(Sniffer &sniffer);
+private:
+    bool callback(const PDU &pdu);
+
+    std::map<IPv4Address, HWAddress<6>> addresses;
+};
+
+void arp_monitor::run(Sniffer &sniffer)
+{
+    sniffer.sniff_loop(
+        std::bind(
+            &arp_monitor::callback,
+            this,
+            std::placeholders::_1
+        )
+    );
+}
+
+bool arp_monitor::callback(const PDU &pdu)
+{
+    // Retrieve the ARP layer
+    const ARP &arp = pdu.rfind_pdu<ARP>();
+    // Is it an ARP reply?
+    if(arp.opcode() == ARP::REPLY) {
+        // Let's check if there's already an entry for this address
+        auto iter = addresses.find(arp.sender_ip_addr());
+        if(iter == addresses.end()) {
+            // We haven't seen this address. Save it.
+            addresses.insert({ arp.sender_ip_addr(), arp.sender_hw_addr()});
+            std::cout << "[INFO] " << arp.sender_ip_addr() << " is at "
+                      << arp.sender_hw_addr() << std::endl;
+        }
+        else {
+            // We've seen this address. If it's not the same HW address, inform it
+            if(arp.sender_hw_addr() != iter->second) {
+                std::cout << "[WARNING] " << arp.sender_ip_addr() << " is at " 
+                          << iter->second << " but also at " << arp.sender_hw_addr() 
+                          << std::endl;
+            }
+        }
+    }
+    return true;
+}
+
+int main(int argc, char *argv[]) 
+{
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <interface>\n";
+        return 1;
+    }
+    arp_monitor monitor;
+    // Sniffer configuration
+    SnifferConfiguration config;
+    config.set_promisc_mode(true);
+    config.set_filter("arp");
+
+    // Sniff on the provided interface in promiscuous mode
+    Sniffer sniffer(argv[1], config);
+    
+    // Only capture arp packets
+    monitor.run(sniffer);
+}

examples/arpspoofing.cpp

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -32,6 +32,7 @@
 #include <string>
 #include <stdexcept>
 #include <cstdlib>
+#include <unistd.h>
 #include <tins/arp.h>
 #include <tins/network_interface.h>
 #include <tins/utils.h>
@@ -42,23 +43,18 @@ using namespace std;
 using namespace Tins;
 
 
-int do_arp_spoofing(NetworkInterface iface, IPv4Address gw, IPv4Address victim, 
+void do_arp_spoofing(NetworkInterface iface, IPv4Address gw, IPv4Address victim, 
   const NetworkInterface::Info &info) 
 {
     PacketSender sender;
     EthernetII::address_type gw_hw, victim_hw;
     
     // Resolves gateway's hardware address.
-    if(!Utils::resolve_hwaddr(iface, gw, &gw_hw, sender)) {
-        cout << "Could not resolve gateway's ip address.\n";
-        return 5;
-    }
+    gw_hw = Utils::resolve_hwaddr(iface, gw, sender);
     
     // Resolves victim's hardware address.
-    if(!Utils::resolve_hwaddr(iface, victim, &victim_hw, sender)) {
-        cout << "Could not resolve victim's ip address.\n";
-        return 6;
-    }
+    victim_hw = Utils::resolve_hwaddr(iface, victim, sender);
+
     // Print out the hw addresses we're using.
     cout << " Using gateway hw address: " << gw_hw << "\n";
     cout << " Using victim hw address:  " << victim_hw << "\n";
@@ -66,22 +62,22 @@ int do_arp_spoofing(NetworkInterface iface, IPv4Address gw, IPv4Address victim,
     
     /* We tell the gateway that the victim is at out hw address,
      * and tell the victim that the gateway is at out hw address */
-    ARP *gw_arp     = new ARP(gw, victim, gw_hw, info.hw_addr), 
-        *victim_arp = new ARP(victim, gw, victim_hw, info.hw_addr);
+    ARP gw_arp(gw, victim, gw_hw, info.hw_addr), 
+        victim_arp(victim, gw, victim_hw, info.hw_addr);
     // We are "replying" ARP requests
-    gw_arp->opcode(ARP::REPLY);
-    victim_arp->opcode(ARP::REPLY);
+    gw_arp.opcode(ARP::REPLY);
+    victim_arp.opcode(ARP::REPLY);
     
     /* The packet we'll send to the gateway and victim. 
      * We include our hw address as the source address
      * in ethernet layer, to avoid possible packet dropping
      * performed by any routers. */
-    EthernetII to_gw(iface, gw_hw, info.hw_addr, gw_arp);
-    EthernetII to_victim(iface, victim_hw, info.hw_addr, victim_arp);
+    EthernetII to_gw = EthernetII(gw_hw, info.hw_addr) / gw_arp;
+    EthernetII to_victim = EthernetII(victim_hw, info.hw_addr) / victim_arp;
     while(true) {
         // Just send them once every 5 seconds.
-        sender.send(to_gw);
-        sender.send(to_victim);
+        sender.send(to_gw, iface);
+        sender.send(to_victim, iface);
         sleep(5);
     }
 }
@@ -115,7 +111,7 @@ int main(int argc, char *argv[]) {
         return 3;
     }
     try {
-        return do_arp_spoofing(iface, gw, victim, info);
+        do_arp_spoofing(iface, gw, victim, info);
     }
     catch(std::runtime_error &ex) {
         std::cout << "Runtime error: " << ex.what() << std::endl;

examples/beacon_display.cpp

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -47,17 +47,21 @@ private:
 };
  
 void BeaconSniffer::run(const std::string &iface) {
-    Sniffer sniffer(iface, 1500, true, "type mgt subtype beacon");
+    SnifferConfiguration config;
+    config.set_promisc_mode(true);
+    config.set_filter("type mgt subtype beacon");
+    config.set_rfmon(true);
+    Sniffer sniffer(iface, config);
     sniffer.sniff_loop(make_sniffer_handler(this, &BeaconSniffer::callback));
 }
  
 bool BeaconSniffer::callback(PDU &pdu) {
     // Get the Dot11 layer
-    Dot11Beacon *beacon = pdu.find_pdu<Dot11Beacon>();
+    const Dot11Beacon &beacon = pdu.rfind_pdu<Dot11Beacon>();
     // All beacons must have from_ds == to_ds == 0
-    if(beacon && !beacon->from_ds() && !beacon->to_ds()) {
+    if(!beacon.from_ds() && !beacon.to_ds()) {
         // Get the AP address
-        address_type addr = beacon->addr2();
+        address_type addr = beacon.addr2();
         // Look it up in our set
         ssids_type::iterator it = ssids.find(addr);
         if(it == ssids.end()) {
@@ -66,7 +70,7 @@ bool BeaconSniffer::callback(PDU &pdu) {
                 /* If no ssid option is set, then Dot11::ssid will throw 
                  * a std::runtime_error.
                  */
-                std::string ssid = beacon->ssid();
+                std::string ssid = beacon.ssid();
                 // Save it so we don't show it again.
                 ssids.insert(addr);
                 // Display the tuple "address - ssid".

examples/configure.ac

@@ -1,16 +0,0 @@
-AC_INIT(myconfig, 0.1)
-
-AC_PROG_CXX()
-AC_LANG(C++)
-
-if test -n "$debug"
-then
-    CFLAGS="-DDEBUG -g"
-else
-    CFLAGS="-O3"
-fi
-
-AC_CHECK_HEADERS([pcap.h])
-AC_CHECK_LIB(pcap, pcap_loop, [], [AC_MSG_ERROR([pcap library is needed!])])
-AC_SUBST(CFLAGS)
-AC_OUTPUT(Makefile)

examples/dns_queries.cpp

@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <tins/tins.h>
+#include <iostream>
+
+using namespace Tins;
+
+bool callback(const PDU &pdu) 
+{
+    // The packet probably looks like this:
+    //
+    // EthernetII / IP / UDP / RawPDU
+    //
+    // So we retrieve the RawPDU layer, and construct a 
+    // DNS PDU using its contents.
+    DNS dns = pdu.rfind_pdu<RawPDU>().to<DNS>();
+    
+    // Retrieve the queries and print the domain name:
+    for(const auto &query : dns.queries()) 
+        std::cout << query.dname() << std::endl;
+    return true;
+}
+
+int main(int argc, char *argv[]) 
+{
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <interface>" << std::endl;
+        return 1;
+    }
+    // Sniff on the provided interface in promiscuos mode
+    SnifferConfiguration config;
+    config.set_promisc_mode(true);
+    // Only capture udp packets sent to port 53
+    config.set_filter("udp and dst port 53");
+    Sniffer sniffer(argv[1], config);
+    
+    // Start the capture
+    sniffer.sniff_loop(callback);
+}

examples/dns_spoof.cpp

@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <tins/tins.h>
+#include <iostream>
+
+using namespace Tins;
+
+PacketSender sender;
+
+bool callback(const PDU &pdu) 
+{
+    // The packet probably looks like this:
+    //
+    // EthernetII / IP / UDP / RawPDU
+    //
+    // So we retrieve each layer, and construct a 
+    // DNS PDU from the RawPDU layer contents.
+    EthernetII eth = pdu.rfind_pdu<EthernetII>();
+    IP ip = eth.rfind_pdu<IP>();
+    UDP udp = ip.rfind_pdu<UDP>();
+    DNS dns = udp.rfind_pdu<RawPDU>().to<DNS>();
+
+    // Is it a DNS query?
+    if(dns.type() == DNS::QUERY) {
+        // Let's see if there's any query for an "A" record.
+        for(const auto &query : dns.queries()) {
+            if(query.type() == DNS::A) {
+                // Here's one! Let's add an answer.
+                dns.add_answer(
+                    DNS::Resource(
+                        query.dname(), 
+                        "127.0.0.1",
+                        DNS::A, 
+                        query.query_class(), 
+                        // 777 is just a random TTL
+                        777
+                    )
+                );
+            }
+        }
+        // Have we added some answers?
+        if(dns.answers_count() > 0) {
+            // It's a response now
+            dns.type(DNS::RESPONSE);
+            // Recursion is available(just in case)
+            dns.recursion_available(1);
+            // Build our packet
+            auto pkt = EthernetII(eth.src_addr(), eth.dst_addr()) /
+                        IP(ip.src_addr(), ip.dst_addr()) /
+                        UDP(udp.sport(), udp.dport()) /
+                        dns;
+            // Send it!
+            sender.send(pkt);
+        }
+    }
+    return true;
+}
+
+int main(int argc, char *argv[]) 
+{
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <interface>" << std::endl;
+        return 1;
+    }
+    // Sniff on the provided interface in promiscuos mode
+    SnifferConfiguration config;
+    config.set_promisc_mode(true);
+    // Only capture udp packets sent to port 53
+    config.set_filter("udp and dst port 53");
+    Sniffer sniffer(argv[1], config);
+    
+    // All packets will be sent through the provided interface
+    sender.default_interface(argv[1]);
+    
+    // Start the capture
+    sniffer.sniff_loop(callback);
+}

examples/dns_stats.cpp

@@ -0,0 +1,191 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <iostream>
+#include <mutex>
+#include <chrono>
+#include <map>
+#include <thread>
+#include <algorithm>
+#include <tins/tins.h>
+
+using namespace Tins;
+
+// Holds the DNS response time statistics. The response time is 
+// represented using the Duration template parameter.
+template<typename Duration>
+class statistics {
+public:
+    using duration_type = Duration;
+    using locker_type = std::lock_guard<std::mutex>;
+    
+    struct information {
+        duration_type average, worst;
+        size_t count;
+    };
+    
+    statistics()
+    : m_duration(), m_worst(duration_type::min()), m_count()
+    {
+        
+    }
+    
+    void add_response_time(const duration_type& duration)
+    {
+        locker_type _(m_lock);
+        m_duration += duration;
+        m_count++;
+        m_worst = std::max(m_worst, duration);
+    }
+    
+    information get_information() const 
+    {
+        locker_type _(m_lock);
+        if(m_count == 0)
+            return { };
+        else 
+            return { m_duration / m_count, m_worst, m_count };
+    };
+private:
+    duration_type m_duration, m_worst;
+    size_t m_count;
+    mutable std::mutex m_lock;
+};
+
+// Sniffs and tracks DNS queries. When a matching DNS response is found,
+// the response time is added to a statistics object.
+//
+// This class performs *no cleanup* on data associated with queries that
+// weren't answered.
+class dns_monitor {
+public:
+    // The response times are measured in milliseconds
+    using duration_type = std::chrono::milliseconds;
+    // The statistics type used.
+    using statistics_type = statistics<duration_type>;
+    
+    void run(BaseSniffer& sniffer);
+    const statistics_type& stats() const {
+        return m_stats;
+    }
+private:
+    using packet_info = std::tuple<IPv4Address, IPv4Address, uint16_t>;
+    using clock_type = std::chrono::steady_clock;
+    using time_point_type = std::chrono::time_point<clock_type>;
+
+    bool callback(const PDU& pdu);
+    static packet_info make_packet_info(const PDU& pdu, const DNS& dns);
+    
+    statistics_type m_stats;    
+    std::map<packet_info, time_point_type> m_packet_info;
+};
+
+void dns_monitor::run(BaseSniffer& sniffer)
+{
+    sniffer.sniff_loop(
+        std::bind(
+            &dns_monitor::callback, 
+            this, 
+            std::placeholders::_1
+        )
+    );
+}
+
+bool dns_monitor::callback(const PDU& pdu)
+{
+    auto now = clock_type::now();
+    auto dns = pdu.rfind_pdu<RawPDU>().to<DNS>();
+    auto info = make_packet_info(pdu, dns);
+    // If it's a query, add the sniff time to our map.
+    if(dns.type() == DNS::QUERY) {
+        m_packet_info.insert(
+            std::make_pair(info, now)
+        );
+    }
+    else {
+        // It's a response, we need to find the query in our map.
+        auto iter = m_packet_info.find(info);
+        if(iter != m_packet_info.end()) {
+            // We found the query, let's add the response time to the
+            // statistics object.
+            m_stats.add_response_time(
+                std::chrono::duration_cast<duration_type>(now - iter->second)
+            );
+            // Forget about the query.
+            m_packet_info.erase(iter);
+        }
+    }
+    return true;
+}
+
+// It is required that we can identify packets sent and received that
+// hold the same DNS id as belonging to the same query. 
+// 
+// This function retrieves a tuple (addr, addr, id) that will achieve it.
+auto dns_monitor::make_packet_info(const PDU& pdu, const DNS& dns) -> packet_info
+{
+    const auto& ip = pdu.rfind_pdu<IP>();
+    return std::make_tuple( 
+        // smallest address first
+        std::min(ip.src_addr(), ip.dst_addr()),
+        // largest address second
+        std::max(ip.src_addr(), ip.dst_addr()),
+        dns.id()
+    );
+}
+
+int main(int argc, char *argv[]) {
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <interface>\n";
+        return 1;
+    }
+    try {
+        SnifferConfiguration config;
+        config.set_promisc_mode(true);
+        config.set_filter("udp and dst port 53");
+        Sniffer sniffer(argv[1], config);
+        dns_monitor monitor;
+        std::thread thread(
+            [&]() {
+                monitor.run(sniffer);
+            }
+        );
+        while(true) {
+            auto info = monitor.stats().get_information();
+            std::cout << "\rAverage " << info.average.count() 
+                        << "ms. Worst: " << info.worst.count() << "ms. Count: "
+                        << info.count;
+            std::cout.flush();
+            std::this_thread::sleep_for(std::chrono::seconds(1));
+        }
+    }
+    catch(std::exception& ex) {
+        std::cout << "[-] Error: " << ex.what() << std::endl;
+    }
+}

examples/portscan.cpp

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -30,9 +30,11 @@
 #include <iostream>
 #include <iomanip>
 #include <vector>
+#include <set>
 #include <string>
 #include <cstdlib>
 #include <pthread.h>
+#include <unistd.h>
 #include <tins/ip.h>
 #include <tins/tcp.h>
 #include <tins/ip_address.h>
@@ -48,43 +50,103 @@ using namespace Tins;
 
 typedef std::pair<Sniffer*, std::string> sniffer_data;
 
+class Scanner {
+public:
+    Scanner(const NetworkInterface& interface, const IPv4Address& address, 
+        const vector<string>& ports);
+    
+    void run();
+private:
+    void send_syns(const NetworkInterface &iface, IPv4Address dest_ip);
+    bool callback(PDU &pdu);
+    static void *thread_proc(void *param);
+    void launch_sniffer();
+    
+    NetworkInterface iface;
+    IPv4Address host_to_scan;
+    set<uint16_t> ports_to_scan;
+    Sniffer sniffer;
+};
+
+Scanner::Scanner(const NetworkInterface& interface, const IPv4Address& address, 
+    const vector<string>& ports)
+: iface(interface), host_to_scan(address), sniffer(interface.name())
+{
+    sniffer.set_filter(
+        "tcp and ip src " + address.to_string() + " and tcp[tcpflags] & (tcp-rst|tcp-syn) != 0"
+    );
+    for(size_t i = 0; i < ports.size(); ++i) {
+        ports_to_scan.insert(atoi(ports[i].c_str()));
+    }
+}
+
+void *Scanner::thread_proc(void *param) {
+    Scanner *data = (Scanner*)param;
+    data->launch_sniffer();
+    return 0;
+}
+
+void Scanner::launch_sniffer()
+{
+    sniffer.sniff_loop(make_sniffer_handler(this, &Scanner::callback));
+}
 
 /* Our scan handler. This will receive SYNs and RSTs and inform us
  * the scanned port's status.
  */
-bool handler(PDU &pdu) {
-    TCP *tcp = pdu.find_pdu<TCP>();
-    if(tcp) {
+bool Scanner::callback(PDU &pdu) 
+{
+    // Find the layers we want.
+    const IP &ip = pdu.rfind_pdu<IP>();
+    const TCP &tcp = pdu.rfind_pdu<TCP>();
+    // Check if the host that we're scanning sent this packet and
+    // the source port is one of those that we scanned.
+    if(ip.src_addr() == host_to_scan && ports_to_scan.count(tcp.sport()) == 1) {
         // Ok, it's a TCP PDU. Is RST flag on? Then port is closed.
-        if(tcp->get_flag(TCP::RST)) {
+        if(tcp.get_flag(TCP::RST)) {
             // This indicates we should stop sniffing.
-            if(tcp->get_flag(TCP::SYN))
+            if(tcp.get_flag(TCP::SYN))
                 return false;
-            cout << "Port: " << setw(5) << tcp->sport() << " closed\n";
+            cout << "Port: " << setw(5) << tcp.sport() << " closed\n";
         }
         // Is SYN flag on? Then port is open!
-        else if(tcp->get_flag(TCP::SYN) && tcp->get_flag(TCP::ACK))
-            cout << "Port: " << setw(5) << tcp->sport() << " open\n";
+        else if(tcp.flags() == (TCP::SYN | TCP::ACK)) {
+            cout << "Port: " << setw(5) << tcp.sport() << " open\n";
+        }
     }
     return true;
 }
 
+void Scanner::run()
+{
+    pthread_t thread;
+    // Launch our sniff thread.
+    pthread_create(&thread, 0, &Scanner::thread_proc, this); 
+    // Start sending SYNs to port.
+    send_syns(iface, host_to_scan);
+
+    // Wait for our sniffer.
+    void *dummy;
+    pthread_join(thread, &dummy);
+}
+
 // Send syns to the given ip address, using the destination ports provided.
-void send_syns(const NetworkInterface &iface, IPv4Address dest_ip, const vector<string> &ips) {
+void Scanner::send_syns(const NetworkInterface &iface, IPv4Address dest_ip) {
     // Retrieve the addresses.
     NetworkInterface::Info info = iface.addresses();
     PacketSender sender;
-    TCP *tcp = new TCP();
     // Allocate the IP PDU
-    IP ip(dest_ip, info.ip_addr, tcp);
+    IP ip = IP(dest_ip, info.ip_addr) / TCP();
+    // Get the reference to the TCP PDU
+    TCP &tcp = ip.rfind_pdu<TCP>();
     // Set the SYN flag on.
-    tcp->set_flag(TCP::SYN, 1);
-    // Just some arbitrary port. 
-    tcp->sport(1337);
+    tcp.set_flag(TCP::SYN, 1);
+    // Just some random port. 
+    tcp.sport(1337);
     cout << "Sending SYNs..." << endl;
-    for(vector<string>::const_iterator it = ips.begin(); it != ips.end(); ++it) {
+    for(set<uint16_t>::const_iterator it = ports_to_scan.begin(); it != ports_to_scan.end(); ++it) {
         // Set the new port and send the packet!
-        tcp->dport(atoi(it->c_str()));
+        tcp.dport(*it);
         sender.send(ip);
     }
     // Wait 1 second.
@@ -92,22 +154,13 @@ void send_syns(const NetworkInterface &iface, IPv4Address dest_ip, const vector<
     /* Special packet to indicate that we're done. This will be sniffed
      * by our function, which will in turn return false.  
      */
-    tcp->set_flag(TCP::RST, 1);
+    tcp.set_flag(TCP::RST, 1);
+    tcp.sport(*ports_to_scan.begin());
     // Pretend we're the scanned host...
     ip.src_addr(dest_ip);
     // We use an ethernet pdu, otherwise the kernel will drop it.
-    EthernetII eth(iface, info.hw_addr, info.hw_addr, ip.clone());
-    sender.send(eth);
-}
-
-void *thread_proc(void *param) {
-    // IP address is our parameter.
-    sniffer_data *data = (sniffer_data*)param;
-    Sniffer *sniffer = data->first;
-    sniffer->set_filter("tcp and ip src " + data->second + " and tcp[tcpflags] & (tcp-rst|tcp-syn) != 0");
-    // Sniff loop. Only sniff TCP PDUs comming from the given IP and have either RST or SYN flag on.
-    sniffer->sniff_loop(handler);
-    return 0;
+    EthernetII eth = EthernetII(info.hw_addr, info.hw_addr) / ip;
+    sender.send(eth, iface);
 }
 
 void scan(int argc, char *argv[]) {
@@ -115,23 +168,12 @@ void scan(int argc, char *argv[]) {
     // Resolve the interface which will be our gateway
     NetworkInterface iface(ip);
     cout << "Sniffing on interface: " << iface.name() << endl;
-
-    // 300 bytes are enough to receive SYNs and RSTs.
-    Sniffer sniffer(iface.name(), 300);
-    sniffer_data data(&sniffer, argv[1]);
-    pthread_t thread;
-    // Launch our sniff thread.
-    pthread_create(&thread, 0, thread_proc, &data); 
     
     // Consume arguments
     argv += 2;
     argc -= 2;
-    // Start sending SYNs to port.
-    send_syns(iface, ip, vector<string>(argv, argv + (argc)));
-    
-    // Wait for our sniffer.
-    void *dummy;
-    pthread_join(thread, &dummy);
+    Scanner scanner(iface, ip, vector<string>(argv, argv + (argc)));
+    scanner.run();
 }
 
 int main(int argc, char *argv[]) {

examples/traceroute.cpp

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -47,14 +47,20 @@ public:
     
     result_type trace() {
         // ICMPs that aren't sent from us.
-        Sniffer sniffer(
-            iface.name(), 500, false, 
-            "ip proto \\icmp and not src host " + iface.addresses().ip_addr.to_string()
-        );
+        SnifferConfiguration config;
+        config.set_snap_len(500);
+        config.set_promisc_mode(false);
+        config.set_filter(
+            "ip proto \\icmp and not src host " + iface.addresses().ip_addr.to_string());
+        Sniffer sniffer(iface.name(), config);
         
         PacketSender sender;
         // Create our handler
-        auto handler = make_sniffer_handler(this, &Traceroute::sniff_callback);
+        auto handler = std::bind(
+            &Traceroute::sniff_callback, 
+            this, 
+            std::placeholders::_1
+        );
         // We're running
         running = true;
         // Start the sniff thread
@@ -74,7 +80,7 @@ private:
 
     void send_packets(PacketSender &sender) {
         // ICMPs are icmp-requests by default
-        IP ip(addr, iface.addresses().ip_addr, new ICMP());
+        IP ip = IP(addr, iface.addresses().ip_addr) / ICMP();
         // We'll find at most 10 hops.
         
         for(auto i = 1; i <= 10; ++i) {
@@ -98,30 +104,20 @@ private:
     }
 
     bool sniff_callback(PDU &pdu) {
-        IP *ip = pdu.find_pdu<IP>();
-        RawPDU *raw = pdu.find_pdu<RawPDU>();
-        if(ip && raw) {
-            ttl_map::const_iterator iter;
-            IP inner_ip;
-            // This will fail if its a corrupted packet
-            try {
-                // Fetch the IP PDU attached to the ICMP response
-                inner_ip = IP(&raw->payload()[0], raw->payload_size());
-            }
-            catch(std::runtime_error &ex) {
-                return running;
-            }
-            // Critical section
-            {
-                std::lock_guard<std::mutex> _(lock);
-                iter = ttls.find(inner_ip.id());
-            } 
+        const IP &ip = pdu.rfind_pdu<IP>();
+        ttl_map::const_iterator iter;
+        // Fetch the IP PDU attached to the ICMP response
+        const IP inner_ip = pdu.rfind_pdu<RawPDU>().to<IP>();
+        // Critical section
+        {
+            std::lock_guard<std::mutex> _(lock);
+            iter = ttls.find(inner_ip.id());
+        } 
 
-            // It's an actual response
-            if(iter != ttls.end()) {
-                // Store it
-                results[inner_ip.id()] = ip->src_addr();
-            }
+        // It's an actual response
+        if(iter != ttls.end()) {
+            // Store it
+            results[inner_ip.id()] = ip.src_addr();
         }
         return running;
     }

examples/wps_detect.cpp

@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <tins/tins.h>
+#include <iostream>
+#include <set>
+#include <string>
+
+using namespace Tins;
+
+// BSSIDs which we've already seen
+std::set<HWAddress<6>> addrs;
+// This will be the content of the OUI field in the vendor specific 
+// tagged option if it's a WPS tag.
+const HWAddress<3> expected_oui("00:50:F2");
+
+bool handler(const PDU& pdu) {
+    const Dot11Beacon &beacon = pdu.rfind_pdu<Dot11Beacon>();
+    // Only process it once
+    if(addrs.insert(beacon.addr3()).second) {
+        // Iterate the tagged options
+        for(const auto &opt : beacon.options()) {
+            // Is this a vendor-specific tag?
+            if(opt.option() == Dot11::VENDOR_SPECIFIC) {
+                // Make sure there's enough size for the OUI + identifier
+                if(opt.data_size() >= 4) { 
+                    // Retrieve the OUI field
+                    HWAddress<3> addr = opt.data_ptr();
+                    // Are we interested in this OUI and is it a WPS tag?
+                    if(addr == expected_oui && opt.data_ptr()[3] == 0x04) {
+                        std::cout << "[+] Access point: " << beacon.ssid() << " uses WPS\n";
+                    }
+                }
+            }
+        }
+    }
+    return true;
+}
+
+int main(int argc, char *argv[]) {
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <DEVICE>\n";
+        return 1;
+    }
+    // Only sniff beacons
+    SnifferConfiguration config;
+    config.set_snap_len(2000);
+    config.set_promisc_mode(true);
+    config.set_filter("wlan type mgt subtype beacon");
+    Sniffer sniffer(argv[1], config);
+    sniffer.sniff_loop(handler);
+}

include/CMakeLists.txt

@@ -0,0 +1 @@
+ADD_SUBDIRECTORY(tins)

include/dns_record.h

@@ -1,259 +0,0 @@
-/*
- * Copyright (c) 2012, Nasel
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following disclaimer
- *   in the documentation and/or other materials provided with the
- *   distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef TINS_DNS_RECORD_H
-#define TINS_DNS_RECORD_H
-
-#include <string>
-#include <vector>
-#include <stdint.h>
-#include "cxxstd.h"
-#include "macros.h"
-
-namespace Tins {
-class DNSRRImpl;
-
-/**
- * \brief Abstracts a DNS resource record.
- */
-class DNSResourceRecord {
-public:
-    /**
-     * \brief The type used to store resource records' information.
-     */
-    TINS_BEGIN_PACK
-    struct info {
-        uint16_t type, qclass;
-        uint32_t ttl;
-        
-        info(uint16_t tp, uint16_t qc, uint32_t tm) 
-          : type(tp), qclass(qc), ttl(tm) { }
-        
-        info() : type(), qclass(), ttl() {}
-    } TINS_END_PACK;
-    
-    /**
-     * \brief Constructs a record.
-     * \param impl A pointer to the impl object.
-     * \param data A pointer to the start of the data buffer.
-     * \param len The length of the data.
-     */
-    DNSResourceRecord(DNSRRImpl *impl = 0, const uint8_t *data = 0, uint16_t len = 0);
-    
-    /**
-     * \brief Constructs a record.
-     * \param buffer A pointer to the start of the data buffer.
-     * \param len The length of the data.
-     */
-    DNSResourceRecord(const uint8_t *buffer, uint32_t size);
-    
-    /**
-     * \brief Constructs a record from an input range.
-     * \param impl A pointer to the impl object.
-     * \param start The begining of the range.
-     * \param end The end of the range.
-     */
-    template<typename ForwardIterator>
-    DNSResourceRecord(DNSRRImpl *impl, ForwardIterator start, ForwardIterator end) 
-    : impl(impl), data(start, end)
-    {  }
-    
-    /**
-     * \brief Copy constructor.
-     * 
-     * This handles cloning the impl object.
-     * \param rhs The record which will be copied.
-     */
-    DNSResourceRecord(const DNSResourceRecord &rhs);
-    
-    /**
-     * \brief Copy assignment operator.
-     * 
-     * This handles cloning the impl object.
-     * \param rhs The record which will be copied.
-     */
-    DNSResourceRecord& operator=(const DNSResourceRecord &rhs);
-    
-    #if TINS_IS_CXX11
-        /**
-         * Move constructor.
-         */
-        DNSResourceRecord(DNSResourceRecord &&rhs) noexcept;
-        
-        /**
-         * Move assignment operator.
-         */
-        DNSResourceRecord& operator=(DNSResourceRecord &&rhs) noexcept;
-    #endif // TINS_IS_CXX11
-    
-    /**
-     * \brief Destructor.
-     * 
-     * This frees the impl object.
-     */
-    ~DNSResourceRecord();
-
-    /**
-     * \brief Writes this record to a buffer.
-     * 
-     * \param buffer The buffer in which to store the serialization.
-     * \return uint32_t containing the number of bytes written.
-     */
-    uint32_t write(uint8_t *buffer) const;
-    
-    /**
-     * \brief Returns the size of the data in this record.
-     */
-    uint32_t data_size() const {
-        return data.size();
-    }
-    
-    /**
-     * \brief Returns the pointer to the start of the data buffer.
-     */
-    const uint8_t *data_ptr() const {
-        return &data[0];
-    }
-    
-    /**
-     * \brief Returns a bool indicating whether this record contains
-     * a domain name as the name being resolved.
-     */
-    bool has_domain_name() const;
-    
-    /**
-     * \brief Returns a pointer to the domain name stored in this record.
-     * 
-     * This will throw a std::bad_cast exception if the impl object is
-     * not of the type NamedDNSRRImpl.
-     */
-    const std::string *dname() const;
-    
-    /**
-     * \brief Returns the offset stored in this record.
-     * 
-     * This will throw a std::bad_cast exception if the impl object is
-     * not of the type OffsetedDNSRRImpl.
-     */
-    uint16_t offset() const;
-    
-    /**
-     * \brief Returns the size of this record.
-     */
-    uint32_t size() const;
-    
-    /**
-     * \brief Returns a reference to the info field.
-     */
-    info &information() {
-        return info_;
-    }
-    
-    /**
-     * \brief Returns a const reference to the info field.
-     */
-    const info &information() const {
-        return info_;
-    }
-    
-    /**
-     * \brief Checks if the domain name stored in this record matches
-     * the given one.
-     * 
-     * This is a shortcut 
-     */
-    bool matches(const std::string &dname) const;
-private:
-    DNSRRImpl *clone_impl() const;
-    size_t impl_size() const;
-
-    info info_;
-    std::vector<uint8_t> data;
-    DNSRRImpl *impl;
-};
-
-/** 
- * \cond
- */
-class DNSRRImpl {
-public:
-    virtual ~DNSRRImpl() {}
-    virtual uint32_t size() const = 0;
-    virtual uint32_t do_write(uint8_t *buffer) const = 0;
-    virtual bool matches(const std::string &dname) const { return false; }
-    virtual DNSRRImpl *clone() const = 0;
-};
-
-class OffsetedDNSRRImpl : public DNSRRImpl {
-public:
-    OffsetedDNSRRImpl(uint16_t off);
-    
-    uint32_t do_write(uint8_t *buffer) const;
-    uint32_t size() const;
-    OffsetedDNSRRImpl *clone() const;
-    uint16_t offset() const;
-private:
-    uint16_t offset_;
-};
-
-class NamedDNSRRImpl : public DNSRRImpl {
-public:
-    NamedDNSRRImpl(const std::string &nm);
-    
-    template<typename ForwardIterator>
-    NamedDNSRRImpl(ForwardIterator start, ForwardIterator end)
-    : name(start, end) 
-    { }
-    
-    uint32_t do_write(uint8_t *buffer) const;
-    
-    uint32_t size() const;
-    
-    bool matches(const std::string &dname) const;
-    
-    const std::string *dname_pointer() const;
-    NamedDNSRRImpl *clone() const;
-private:
-    std::string name;
-};
-
-/** 
- * \endcond
- */
-
-inline DNSResourceRecord make_offseted_record(uint16_t offset, const uint8_t *data = 0, uint32_t size = 0) {
-    return DNSResourceRecord(new OffsetedDNSRRImpl(offset), data, size);
-}
-
-inline DNSResourceRecord make_named_record(const std::string &name, const uint8_t *data = 0, uint32_t size = 0) {
-    return DNSResourceRecord(new NamedDNSRRImpl(name), data, size);
-}
-}
-
-#endif // TINS_DNS_RECORD_H

include/ip_address.h

@@ -1,142 +0,0 @@
-/*
- * Copyright (c) 2012, Nasel
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following disclaimer
- *   in the documentation and/or other materials provided with the
- *   distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef TINS_IPADDRESS_H
-#define TINS_IPADDRESS_H
-
-#include <string>
-#include <iostream>
-#include <stdint.h>
-
-namespace Tins {
-    /**
-     * \class IPv4Address
-     * \brief Abstraction of an IPv4 address.
-     */
-    class IPv4Address {
-    public:
-        /**
-         * The address size.
-         */
-        static const size_t address_size = sizeof(uint32_t);
-        
-        /**
-         * \brief Constructor taking a const char*.
-         * 
-         * Constructs an IPv4Address from a dotted-notation address 
-         * cstring. If the pointer provided is null, then a default 
-         * IPv4Address object is constructed, which corresponds to 
-         * the 0.0.0.0 address.
-         * 
-         * \param ip const char* containing the dotted-notation address.
-         */
-        IPv4Address(const char *ip = 0);
-        
-        /**
-         * \brief Constructor taking a std::string.
-         * 
-         * Constructs an IPv4Address from a dotted-notation std::strings
-         * 
-         * \param ip std::string containing the dotted-notation address.
-         */
-        IPv4Address(const std::string &ip);
-        
-        /**
-         * \brief Constructor taking a IP address represented as a
-         * big endian integer.
-         * 
-         * This constructor should be used internally by PDUs that
-         * handle IP addresses. The provided integer <b>must</b> be
-         * be in big endian.
-         */
-        explicit IPv4Address(uint32_t ip);
-        
-        /**
-         * \brief User defined conversion to big endian integral value.
-         */
-        operator uint32_t() const;
-        
-        /**
-         * \brief Retrieve the string representation of this address.
-         * 
-         * \return std::string containing the representation of this address.
-         */
-        std::string to_string() const;
-        
-        /**
-         * \brief Compare this IPv4Address for equality.
-         * 
-         * \param rhs The address to be compared.
-         * \return bool indicating whether this address equals rhs.
-         */
-        bool operator==(const IPv4Address &rhs) const {
-            return ip_addr == rhs.ip_addr;
-        }
-        
-        /**
-         * \brief Compare this IPv4Address for inequality.
-         * 
-         * \param rhs The address to be compared.
-         * \return bool indicating whether this address is distinct 
-         * from rhs.
-         */
-        bool operator!=(const IPv4Address &rhs) const {
-            return !(*this == rhs);
-        }
-        
-        /**
-         * \brief Compare this IPv4Address for less-than inequality.
-         * 
-         * \param rhs The address to be compared.
-         * \return bool indicating whether this address is less-than rhs.
-         */
-        bool operator< (const IPv4Address &rhs) const {
-            return ip_addr < rhs.ip_addr;
-        }
-        
-        /**
-         * \brief Writes this address to a std::ostream.
-         * 
-         * This method writes addr in a dotted-string notation address
-         * to the std::ostream argument.
-         * 
-         * \param output The std::ostream in which to write the address.
-         * \param addr The IPv4Address to be written.
-         * \return std::stream& pointing to output.
-         */
-        friend std::ostream &operator<<(std::ostream &output, const IPv4Address &addr);
-    private:
-        uint32_t ip_to_int(const std::string &ip);
-    
-        uint32_t ip_addr;
-    };
-}
-
-
-#endif // TINS_IPADDRESS_H

include/packet_sender.h

@@ -1,261 +0,0 @@
-/*
- * Copyright (c) 2012, Nasel
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following disclaimer
- *   in the documentation and/or other materials provided with the
- *   distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef TINS_PACKET_SENDER_H
-#define TINS_PACKET_SENDER_H
-
-
-#include <string>
-#include <stdexcept>
-#include <vector>
-#include <stdint.h>
-#include <map>
-#include "network_interface.h"
-#include "macros.h"
-
-struct timeval;
-struct sockaddr;
-
-namespace Tins {
-    class PDU;
-    
-    /**
-     * \brief Class that enables sending the created PDUs
-     *
-     * PacketSender class is responsible for sending the packets using the
-     * correct PDU layer. It is responsible for opening the raw sockets.
-     */
-    class PacketSender {
-    public:
-        /** 
-         * The default timeout for receive actions.
-         */
-        static const uint32_t DEFAULT_TIMEOUT;
-    
-        /** 
-         * Flags to indicate the socket type.
-         */
-        enum SocketType {
-            ETHER_SOCKET,
-            IP_SOCKET,
-            ARP_SOCKET,
-            ICMP_SOCKET,
-            IPV6_SOCKET,
-            SOCKETS_END
-        };
-
-        /**
-         * \brief Constructor for PacketSender objects.
-         * 
-         * \param recv_timeout The timeout which will be used when receiving responses.
-         */
-        PacketSender(uint32_t recv_timeout = DEFAULT_TIMEOUT, uint32_t usec = 0);
-        
-        /** 
-         * \brief PacketSender destructor.
-         * 
-         * This gracefully closes all open sockets.
-         */
-        ~PacketSender();
-
-        #ifndef WIN32
-        /** 
-         * \brief Opens a layer 2 socket.
-         * 
-         * If this operation fails, then a SocketOpenError will be thrown.
-         */
-        void open_l2_socket(const NetworkInterface& iface = NetworkInterface());
-        #endif // WIN32
-
-        /** 
-         * \brief Opens a layer 3 socket, using the corresponding protocol
-         * for the given flag.
-         * 
-         * If this operation fails, then a SocketOpenError will be thrown.
-         * If the provided socket type is not valid, a InvalidSocketTypeError
-         * will be throw.
-         * 
-         * \param type The type of socket which will be used to pick the protocol flag
-         * for this socket.
-         */
-        void open_l3_socket(SocketType type);
-
-        /** 
-         * \brief Closes the socket associated with the given flag.
-         * 
-         * If the provided type is invalid, meaning no such open socket
-         * exists, a InvalidSocketTypeError is thrown.
-         * 
-         * If any socket close errors are encountered, a SocketCloseError
-         * is thrown.
-         * 
-         * \param type The type of the socket to be closed.
-         */
-        void close_socket(SocketType type, const NetworkInterface &iface = NetworkInterface());
-
-        /** 
-         * \brief Sends a PDU. 
-         * 
-         * This method opens the appropriate socket, if it's not open yet, 
-         * and sends the PDU on the open socket.
-         * 
-         * If any send error occurs, then a SocketWriteError is thrown.
-         * 
-         * \param pdu The PDU to be sent.
-         */
-        void send(PDU &pdu);
-
-        /** 
-         * \brief Sends a PDU and waits for its response. 
-         * 
-         * This method is used to send PDUs and receive their response. 
-         * It opens the required socket(if it's not open yet). This can be used
-         * to expect responses for ICMP, ARP, and such packets that are normally
-         * answered by the host that receives the packet.
-         * 
-         * \param pdu The PDU to send.
-         * \return Returns the response PDU, 0 if not response was received.
-         */
-        PDU *send_recv(PDU &pdu);
-
-        #ifndef WIN32
-        /** 
-         * \brief Receives a layer 2 PDU response to a previously sent PDU.
-         * 
-         * This PacketSender will receive data from a raw socket, open using the corresponding flag,
-         * according to the given type of protocol, until a match for the given PDU is received. 
-         * 
-         * \param pdu The PDU which will try to match the responses.
-         * \param link_addr The sockaddr struct which will be used to receive the PDU.
-         * \param len_addr The sockaddr struct length.
-         * \return Returns the response PDU. If no response is received, then 0 is returned.
-         */
-        PDU *recv_l2(PDU &pdu, struct sockaddr *link_addr, uint32_t len_addr,
-          const NetworkInterface &iface = NetworkInterface());
-
-        /** 
-         * \brief Sends a level 2 PDU.
-         * 
-         * This method sends a layer 2 PDU, using a raw socket, open 
-         * using the corresponding flag, according to the given type of 
-         * protocol. 
-         * 
-         * If any socket write error occurs, a SocketWriteError is thrown.
-         * 
-         * \param pdu The PDU to send.
-         * \param link_addr The sockaddr struct which will be used to send the PDU.
-         * \param len_addr The sockaddr struct length.
-         */
-        void send_l2(PDU &pdu, struct sockaddr* link_addr, uint32_t len_addr, 
-          const NetworkInterface &iface = NetworkInterface());
-        #endif // WIN32
-
-        /** 
-         * \brief Receives a layer 3 PDU response to a previously sent PDU.
-         * 
-         * This PacketSender will receive data from a raw socket, open using the corresponding flag,
-         * according to the given type of protocol, until a match for the given PDU is received. 
-         * 
-         * \param pdu The PDU which will try to match the responses.
-         * \param link_addr The sockaddr struct which will be used to receive the PDU.
-         * \param len_addr The sockaddr struct length.
-         * \param type The socket protocol type.
-         * \return Returns the response PDU. If no response is received, then 0 is returned.
-         */
-        PDU *recv_l3(PDU &pdu, struct sockaddr *link_addr, uint32_t len_addr, SocketType type);
-
-        /** 
-         * \brief Sends a level 3 PDU.
-         * 
-         * This method sends a layer 3 PDU, using a raw socket, open using the corresponding flag,
-         * according to the given type of protocol.
-         * 
-         * If any socket write error occurs, a SocketWriteError is thrown.
-         * 
-         * \param pdu The PDU to send.
-         * \param link_addr The sockaddr struct which will be used to send the PDU.
-         * \param len_addr The sockaddr struct length.
-         * \param type The socket protocol type.
-         */
-        void send_l3(PDU &pdu, struct sockaddr *link_addr, uint32_t len_addr, SocketType type);
-    private:
-        static const int INVALID_RAW_SOCKET;
-
-        typedef std::map<SocketType, int> SocketTypeMap;
-
-        int find_type(SocketType type);
-        int timeval_subtract (struct timeval *result, struct timeval *x, struct timeval *y);
-        #ifndef WIN32
-        bool ether_socket_initialized(const NetworkInterface& iface = NetworkInterface()) const;
-        int get_ether_socket(const NetworkInterface& iface = NetworkInterface());
-        #endif
-        
-        PDU *recv_match_loop(int sock, PDU &pdu, struct sockaddr* link_addr, uint32_t addrlen);
-
-        std::vector<int> _sockets;
-        #ifndef WIN32
-            #ifdef BSD
-            typedef std::map<uint32_t, int> BSDEtherSockets;
-            BSDEtherSockets _ether_socket;
-            #else
-            int _ether_socket;
-            #endif
-        #endif
-        SocketTypeMap _types;
-        uint32_t _timeout, _timeout_usec;
-    };
-    
-    
-    class SocketOpenError : public std::runtime_error {
-    public:
-        SocketOpenError(const std::string &msg) 
-        : std::runtime_error(msg) { }
-    };
-    
-    class SocketCloseError : public std::runtime_error {
-    public:
-        SocketCloseError(const std::string &msg) 
-        : std::runtime_error(msg) { }
-    };
-    
-    class SocketWriteError : public std::runtime_error {
-    public:
-        SocketWriteError(const std::string &msg) 
-        : std::runtime_error(msg) { }
-    };
-    
-    class InvalidSocketTypeError : public std::exception {
-    public:
-        const char *what() const throw() {
-            return "The provided socket type is invalid";
-        }
-    };
-}
-
-#endif // TINS_PACKET_SENDER_H

include/pdu_option.h

@@ -1,139 +0,0 @@
-/*
- * Copyright (c) 2012, Nasel
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following disclaimer
- *   in the documentation and/or other materials provided with the
- *   distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef TINS_PDU_OPTION_H
-#define TINS_PDU_OPTION_H
-
-#include <vector>
-#include <iterator>
-#include <stdint.h>
-
-namespace Tins {
-/**
- * \brief Exception thrown when an option is not found.
- */
-class option_not_found : public std::exception {
-public:
-    const char* what() const throw() {
-        return "Option not found";
-    }
-};
-    
-/**
- * \class PDUOption
- * \brief Represents a PDU option field.
- * 
- * Several PDUs, such as TCP, IP, Dot11 or DHCP contain options. All
- * of them behave exactly the same way. This class represents those
- * options.
- * 
- * The OptionType template parameter indicates the type that will be
- * used to store this option's identifier.
- * 
- * The Container template parameter indicates the container which will
- * be used to store this option's data. The container <b>must</b>
- * store data sequentially. std::vector<uint8_t> is the default
- * container.
- */
-template<typename OptionType, class Container = std::vector<uint8_t> >
-class PDUOption {
-public:
-    typedef Container container_type;
-    typedef typename container_type::value_type data_type;
-    typedef OptionType option_type;
-
-    /**
-     * \brief Constructs a PDUOption.
-     * \param opt The option type.
-     * \param length The option's data length.
-     * \param data The option's data(if any).
-     */
-    PDUOption(option_type opt = option_type(), size_t length = 0, const data_type *data = 0) 
-    : option_(opt) {
-        value_.push_back(length);
-        if(data)
-            value_.insert(value_.end(), data, data + length);
-    }
-    
-    /**
-     * \brief Constructs a PDUOption from iterators, which 
-     * indicate the data to be stored in it.
-     * 
-     * \param opt The option type.
-     * \param start The beginning of the option data.
-     * \param end The end of the option data.
-     */
-    template<typename ForwardIterator>
-    PDUOption(option_type opt, ForwardIterator start, ForwardIterator end) 
-    : option_(opt) {
-        value_.push_back(std::distance(start, end));
-        value_.insert(value_.end(), start, end);
-    }
-    
-    /**
-     * Retrieves this option's type.
-     * \return uint8_t containing this option's size.
-     */
-    option_type option() const {
-        return option_;
-    }
-    
-    /**
-     * Sets this option's type
-     * \param opt The option type to be set.
-     */
-    void option(option_type opt) {
-        option_ = opt;
-    }
-    
-    /**
-     * Retrieves this option's data.
-     * 
-     * If this method is called when data_size() == 0, 
-     * dereferencing the returned pointer will result in undefined
-     * behaviour.
-     * 
-     * \return const data_type& containing this option's value.
-     */
-    const data_type *data_ptr() const {
-        return &*(++value_.begin());
-    }
-    
-    /**
-     * Retrieves the length of this option's data.
-     */
-    size_t data_size() const {
-        return value_.empty() ? 0 : (value_.size() - 1);
-    }
-private:
-    option_type option_;
-    container_type value_;
-};
-} // namespace Tins
-#endif // TINS_PDU_OPTION_H

include/rsn_information.h

@@ -1,183 +0,0 @@
-/*
- * Copyright (c) 2012, Nasel
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following disclaimer
- *   in the documentation and/or other materials provided with the
- *   distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef TINS_RSN_INFORMATION
-#define TINS_RSN_INFORMATION
-
-#include <stdint.h>
-#include <vector>
-#include "endianness.h"
-
-namespace Tins{
-    /**
-     * \brief Class that models the RSN information structure.
-     */
-    class RSNInformation {
-    public:
-        /**
-         * \brief Enum that represents the different cypher suites.
-         */
-        enum CypherSuites {
-            WEP_40  = 0x01ac0f00,
-            TKIP    = 0x02ac0f00,
-            CCMP    = 0x04ac0f00,
-            WEP_104 = 0x05ac0f00
-        };
-
-        /**
-         * \brief Enum that represents the different akm suites.
-         */
-        enum AKMSuites {
-            PMKSA = 0x01ac0f00,
-            PSK   = 0x02ac0f00
-        };
-
-        /**
-         * The type used to store the cypher suites.
-         */
-        typedef std::vector<CypherSuites> cyphers_type;
-        
-        /**
-         * The type used to store the AKM suites.
-         */
-        typedef std::vector<AKMSuites> akm_type;
-        
-        /**
-         * The type returned on serialization.
-         */
-        typedef std::vector<uint8_t> serialization_type;
-
-        /**
-         * \brief Creates an instance of RSNInformation.
-         *
-         * By default, the version is set to 1.
-         */
-        RSNInformation();
-        
-        /**
-         * \brief Creates an instance of RSNInformation from a 
-         * serialization_type object.
-         * 
-         * \param buffer The buffer from which to construct this object.
-         */
-        RSNInformation(const serialization_type &buffer);
-        
-        /**
-         * \brief Constructor from buffer.
-         * 
-         * \param buffer The buffer from which this object will be constructed.
-         * \param total_sz The total size of the buffer.
-         */
-        RSNInformation(const uint8_t *buffer, uint32_t total_sz);
-
-        /**
-         * \brief Helper function to create a WPA2-PSK RSNInformation
-         * \return An instance RSNInformation which contains information
-         * for a WPA2-PSK AP.
-         */
-        static RSNInformation wpa2_psk();
-
-        /**
-         * \brief Adds a pairwise cypher suite.
-         * \param cypher The pairwise cypher suite to be added.
-         */
-        void add_pairwise_cypher(CypherSuites cypher);
-
-        /**
-         * \brief Adds a akm suite.
-         * \param akm The akm suite to be added.
-         */
-        void add_akm_cypher(AKMSuites akm);
-
-        /**
-         * \brief Sets the group suite cypher.
-         * \param group The group suite cypher to be set.
-         */
-        void group_suite(CypherSuites group);
-
-        /**
-         * \brief Sets the version.
-         * \param ver The version to be set.
-         */
-        void version(uint16_t ver);
-
-        /**
-         * \brief Sets the capabilities field.
-         * \param cap The capabilities to be set.
-         */
-        void capabilities(uint16_t cap);
-
-        /* Getters */
-
-        /**
-         * \brief Getter for the group suite field.
-         * \return The group suite field.
-         */
-        CypherSuites group_suite() const { return _group_suite; }
-
-        /**
-         * \brief Getter for the version field.
-         * \return The version field.
-         */
-        uint16_t version() const { return Endian::le_to_host(_version); }
-        
-        /**
-         * \brief Getter for the capabilities field.
-         * \return The version field.
-         */
-        uint16_t capabilities() const { return Endian::le_to_host(_capabilities); }
-
-        /**
-         * \brief Getter for the pairwise cypher suite list.
-         * \return A list of pairwise cypher suites.
-         */
-        const cyphers_type &pairwise_cyphers() const { return _pairwise_cyphers; }
-
-        /**
-         * \brief Getter for the akm suite list.
-         * \return A list of akm suites.
-         */
-        const akm_type &akm_cyphers() const { return _akm_cyphers; }
-
-        /**
-         * \brief Serializes this object.
-         * \return The result of the serialization. 
-         */
-         serialization_type serialize() const;
-    private:
-        void init(const uint8_t *buffer, uint32_t total_sz);
-    
-        uint16_t _version, _capabilities;
-        CypherSuites _group_suite;
-        akm_type _akm_cyphers;
-        cyphers_type _pairwise_cyphers;
-    };
-} // namespace Tins
-
-#endif // TINS_RSN_INFORMATION

include/sniffer.h

@@ -1,323 +0,0 @@
-/*
- * Copyright (c) 2012, Nasel
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following disclaimer
- *   in the documentation and/or other materials provided with the
- *   distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-
-#ifndef TINS_SNIFFER_H
-#define TINS_SNIFFER_H
-
-
-#include <pcap.h>
-#include <string>
-#include <memory>
-#include <stdexcept>
-#include "pdu.h"
-#include "ethernetII.h"
-#include "radiotap.h"
-#include "packet.h"
-#include "loopback.h"
-#include "dot11.h"
-#include "sll.h"
-#include "cxxstd.h"
-
-namespace Tins {
-    /**
-     * \class BaseSniffer
-     * \brief Base class for sniffers.
-     * 
-     * This class implements the basic sniffing operations. Subclasses
-     * should only initialize this object using a pcap_t pointer, which
-     * will be used to extract packets.
-     * 
-     * Initialization must be done using the BaseSniffer::init method.
-     */
-    class BaseSniffer {
-    public:
-        #if TINS_IS_CXX11
-            /**
-             * \brief Move constructor.
-             * This constructor is available only in C++11.
-             */
-            BaseSniffer(BaseSniffer &&rhs) noexcept;
-            
-            /**
-             * \brief Move assignment operator.
-             * This opeartor is available only in C++11.
-             */
-            BaseSniffer& operator=(BaseSniffer &&rhs) noexcept;
-        #endif
-    
-        /**
-         * \brief Sniffer destructor.
-         * This frees all memory used by the pcap handle.
-         */
-        virtual ~BaseSniffer();
-        
-        /**
-         * \brief Compiles a filter and uses it to capture one packet.
-         * 
-         * This method returns the first sniffed packet that matches the 
-         * sniffer's filter, or the first sniffed packet if no filter has
-         * been set.
-         * 
-         * The return type is a thin wrapper over a PDU* and a Timestamp
-         * object. This wrapper can be both implicitly converted to a 
-         * PDU* and a Packet object. So doing this:
-         * 
-         * \code
-         * Sniffer s(...);
-         * std::unique_ptr<PDU> pdu(s.next_packet());
-         * // Packet takes care of the PDU*. 
-         * Packet packet(s.next_packet());
-         * \endcode
-         * 
-         * Is fine, but this:
-         * 
-         * \code
-         * // bad!!
-         * PtrPacket p = s.next_packet();
-         * 
-         * \endcode
-         * 
-         * Is not, since PtrPacket can't be copy constructed. 
-         * 
-         * \sa Packet::release_pdu
-         * 
-         * \return The captured packet, matching the given filter.
-         * If an error occured(probably compiling the filter), PtrPacket::pdu
-         * will return 0. Caller takes ownership of the PDU * stored in
-         * the PtrPacket.
-         */
-        PtrPacket next_packet();
-        
-        /**
-         * \brief Starts a sniffing loop, using a callback object for every
-         * sniffed packet.
-         * 
-         * The callback object must implement an operator with some of
-         * the following(or compatible) signatures:
-         * 
-         * \code
-         * bool operator()(PDU&);
-         * bool operator()(RefPacket&);
-         * \endcode
-         * 
-         * This operator will be called using the sniffed packets 
-         * as arguments. You can modify the parameter argument as you wish. 
-         * Calling PDU methods like PDU::release_inner_pdu is perfectly 
-         * valid.
-         * 
-         * The callback taking a RefPacket will contain a timestamp
-         * indicating the moment in which the packet was taken out of 
-         * the wire/pcap file. 
-         * 
-         * Note that the Functor object will be copied using its copy
-         * constructor, so that object should be some kind of proxy to
-         * another object which will process the packets(e.g. std::bind).
-         * 
-         * \sa RefPacket
-         * 
-         * \param cback_handler The callback handler object which should process packets.
-         * \param max_packets The maximum amount of packets to sniff. 0 == infinite.
-         */
-        template<class Functor>
-        void sniff_loop(Functor function, uint32_t max_packets = 0);
-        
-        /**
-         * \brief Sets a filter on this sniffer.
-         * \param filter The filter to be set.
-         * \return True iif it was possible to apply the filter.
-         */
-        bool set_filter(const std::string &filter);
-        
-        /**
-         * \brief Stops sniffing loops.
-         */
-        void stop_sniff();
-
-        /**
-         * \brief Gets the file descriptor associated with the sniffer.
-         */
-        int get_fd();
-    protected:
-        /**
-         * Default constructor.
-         */
-        BaseSniffer();
-    
-        /**
-         * \brief Initialices this BaseSniffer.
-         * 
-         * \param phandle The pcap handle to be used for sniffing.
-         * \param filter The pcap filter which will be applied to the
-         * stream.
-         * \param if_mask The interface's subnet mask. If 0 is provided,
-         * then some IP broadcast tests won't work correctly.
-         */
-        void init(pcap_t *phandle, const std::string &filter, bpf_u_int32 if_mask);
-    private:
-        template<class Functor>
-        struct LoopData {
-            pcap_t *handle;
-            Functor c_handler;
-            int iface_type;
-            
-            LoopData(pcap_t *_handle, const Functor _handler, 
-              int if_type) 
-            : handle(_handle), c_handler(_handler), iface_type(if_type)
-            { }
-        };
-    
-        BaseSniffer(const BaseSniffer&);
-        BaseSniffer &operator=(const BaseSniffer&);
-        
-        template<class ConcretePDU, class Functor>
-        static bool call_functor(LoopData<Functor> *data, const u_char *packet, const struct pcap_pkthdr *header);
-        
-        bool compile_set_filter(const std::string &filter, bpf_program &prog);
-        
-        template<class Functor>
-        static void callback_handler(u_char *args, const struct pcap_pkthdr *header, const u_char *packet);
-        
-        pcap_t *handle;
-        bpf_u_int32 mask;
-        bpf_program actual_filter;
-        int iface_type;
-    };
-    
-    /** 
-     * \class Sniffer
-     * \brief Sniffs packets using pcap filters.
-     * 
-     * This class uses a given filter to sniff packets and allow the user
-     * to handle them. Each time a filter is set, it's used until a new one
-     * is set. Both Sniffer::next_packet and Sniffer::sniff_loop have an
-     * optional filter parameter. If a filter is set using those parameter,
-     * the previously set filter is freed and the new one is used.
-     */
-    class Sniffer : public BaseSniffer {
-    public:
-        /**
-         * \brief Constructs an instance of Sniffer.
-         * \param device The device which will be sniffed.
-         * \param max_packet_size The maximum packet size to be read.
-         * \param promisc bool indicating wether to put the interface in promiscuous mode.(optional)
-         * \param filter A capture filter to be used on the sniffing session.(optional);
-         */
-        Sniffer(const std::string &device, unsigned max_packet_size,
-          bool promisc = false, const std::string &filter = "");
-    };
-    
-    /**
-     * \class FileSniffer
-     * \brief Parses pcap files and interprets the packets in it.
-     * 
-     * This class acts exactly in the same way that Sniffer, but reads
-     * packets from a pcap file instead of an interface.
-     */
-    class FileSniffer : public BaseSniffer {
-    public:
-        /**
-         * \brief Constructs an instance of FileSniffer.
-         * \param file_name The pcap file which will be parsed.
-         * \param filter A capture filter to be used on the file.(optional);
-         */
-        FileSniffer(const std::string &file_name, const std::string &filter = "");
-    };
-        
-    template<class Functor>
-    void Tins::BaseSniffer::sniff_loop(Functor function, uint32_t max_packets) {
-        LoopData<Functor> data(handle, function, iface_type);
-        pcap_loop(handle, max_packets, &BaseSniffer::callback_handler<Functor>, (u_char*)&data);
-    }
-    
-    template<class ConcretePDU, class Functor>
-    bool Tins::BaseSniffer::call_functor(LoopData<Functor> *data, const u_char *packet, 
-      const struct pcap_pkthdr *header) 
-    {
-        ConcretePDU some_pdu((const uint8_t*)packet, header->caplen);
-        Timestamp ts(header->ts);
-        RefPacket pck(some_pdu, ts);
-        return data->c_handler(pck);
-    }
-    
-    template<class Functor>
-    void Tins::BaseSniffer::callback_handler(u_char *args, const struct pcap_pkthdr *header, const u_char *packet) {
-        try {
-            std::auto_ptr<PDU> pdu;
-            LoopData<Functor> *data = reinterpret_cast<LoopData<Functor>*>(args);
-            bool ret_val(false);
-            if(data->iface_type == DLT_EN10MB)
-                ret_val = call_functor<Tins::EthernetII>(data, packet, header);
-            else if(data->iface_type == DLT_IEEE802_11_RADIO)
-                ret_val = call_functor<Tins::RadioTap>(data, packet, header);
-            else if(data->iface_type == DLT_IEEE802_11) {
-                std::auto_ptr<PDU> pdu(Tins::Dot11::from_bytes((const uint8_t*)packet, header->caplen));
-                if(pdu.get()) {
-                    RefPacket pck(*pdu, header->ts);
-                    ret_val = data->c_handler(pck);
-                }
-            }
-            else if(data->iface_type == DLT_NULL) 
-                ret_val = call_functor<Tins::Loopback>(data, packet, header);
-            else if(data->iface_type == DLT_LINUX_SLL)
-                ret_val = call_functor<Tins::SLL>(data, packet, header);
-                
-            if(!ret_val)
-                pcap_breakloop(data->handle);
-        }
-        catch(std::runtime_error&) {
-            
-        }
-    }
-    
-    template<class T>
-    class HandlerProxy {
-    public:
-        typedef T* ptr_type;
-        typedef bool (T::*fun_type)(PDU&) ;
-    
-        HandlerProxy(ptr_type ptr, fun_type function) 
-        : object(ptr), fun(function) {}
-        
-        bool operator()(PDU &pdu) {
-            return (object->*fun)(pdu);
-        }
-    private:
-        ptr_type object;
-        fun_type fun;
-    };
-    
-    template<class T>
-    HandlerProxy<T> make_sniffer_handler(T *ptr, typename HandlerProxy<T>::fun_type function) 
-    {
-        return HandlerProxy<T>(ptr, function);
-    }
-}
-    
-#endif // TINS_SNIFFER_H

include/tins/CMakeLists.txt

@@ -0,0 +1,7 @@
+FILE(GLOB INCLUDE_FILES "*.h")
+INSTALL(
+    FILES ${INCLUDE_FILES} 
+    DESTINATION include/tins
+    COMPONENT Headers
+)
+ADD_SUBDIRECTORY(dot11)

include/tins/address_range.h

@@ -0,0 +1,331 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TINS_ADDRESS_RANGE
+#define TINS_ADDRESS_RANGE
+
+#include <stdexcept>
+#include <iterator>
+#include "endianness.h"
+#include "internals.h"
+
+namespace Tins {
+/**
+ * \brief AddressRange iterator class.
+ */
+template<typename Address>
+class AddressRangeIterator : public std::iterator<std::forward_iterator_tag, const Address> {
+public:
+    typedef typename std::iterator<std::forward_iterator_tag, const Address>::value_type value_type;
+
+    struct end_iterator {
+
+    };
+
+    /**
+     * Constructs an iterator.
+     *
+     * \param first The address held by this iterator.
+     */
+    AddressRangeIterator(const value_type &addr)
+    : addr(addr), reached_end(false)
+    {
+
+    }
+
+    /**
+     * Constructs an iterator.
+     *
+     * \param first The address held by this iterator.
+     */
+    AddressRangeIterator(const value_type &address, end_iterator)
+    : addr(address)
+    {
+        reached_end = Internals::increment(addr);
+    }
+
+    /**
+     * Retrieves the current address pointed by this iterator.
+     */
+    const value_type& operator*() const {
+        return addr;
+    }
+
+    /**
+     * Retrieves a pointer to the current address pointed by this iterator.
+     */
+    const value_type* operator->() const {
+        return &addr;
+    }
+
+    /**
+     * Compares two iterators for equality.
+     *
+     * \param rhs The iterator with which to compare.
+     */
+    bool operator==(const AddressRangeIterator &rhs) const {
+        return reached_end == rhs.reached_end && addr == rhs.addr;
+    }
+
+    /**
+     * Compares two iterators for inequality.
+     *
+     * \param rhs The iterator with which to compare.
+     */
+    bool operator!=(const AddressRangeIterator &rhs) const {
+        return !(*this == rhs);
+    }
+
+    /**
+     * Increments this iterator.
+     */
+    AddressRangeIterator& operator++() {
+        reached_end = Internals::increment(addr);
+        return *this;
+    }
+
+    /**
+     * Increments this iterator.
+     */
+    AddressRangeIterator operator++(int) {
+        AddressRangeIterator copy(*this);
+        (*this)++;
+        return copy;
+    }
+private:
+    Address addr;
+    bool reached_end;
+};
+
+/**
+ * \brief Represents a range of addresses.
+ *
+ * This class provides a begin()/end() interface which allows
+ * iterating through every address stored in it. 
+ *
+ * Note that when iterating a range that was created using
+ * operator/(IPv4Address, int) and the analog for IPv6, the 
+ * network and broadcast addresses are discarded:
+ *
+ * \code
+ * auto range = IPv4Address("192.168.5.0") / 24;
+ * for(const auto &addr : range) {
+ *     // process 192.168.5.1-254, .0 and .255 are discarded
+ *     process(addr);
+ * }
+ *
+ * // That's only valid for iteration, not for AddressRange<>::contains
+ * 
+ * assert(range.contains("192.168.5.0")); // works
+ * assert(range.contains("192.168.5.255")); // works
+ * \endcode
+ *
+ * Ranges created using AddressRange(address_type, address_type) 
+ * will allow the iteration over the entire range:
+ *
+ * \code
+ * AddressRange<IPv4Address> range("192.168.5.0", "192.168.5.255");
+ * for(const auto &addr : range) {
+ *     // process 192.168.5.0-255, no addresses are discarded
+ *     process(addr);
+ * }
+ * 
+ * assert(range.contains("192.168.5.0")); // still valid
+ * assert(range.contains("192.168.5.255")); // still valid
+ * \endcode
+ * 
+ */
+template<typename Address>
+class AddressRange {
+public:
+    /**
+     * The type of addresses stored in the range.
+     */
+    typedef Address address_type;
+
+    /**
+     * The iterator type.
+     */
+    typedef AddressRangeIterator<address_type> const_iterator;
+
+    /**
+     * \brief The iterator type.
+     *
+     * This is the same type as const_iterator, since the
+     * addresses stored in this range are read only.
+     */
+    typedef const_iterator iterator;
+
+    /**
+     * \brief Constructs an address range from two addresses.
+     *
+     * The range will consist of the addresses [first, last].
+     *
+     * If only_hosts is true, then the network and broadcast addresses
+     * will not be available when iterating the range. 
+     *
+     * If last < first, an std::runtime_error exception is thrown.
+     * 
+     * \param first The first address in the range.
+     * \param last The last address(inclusive) in the range.
+     * \param only_hosts Indicates whether only host addresses
+     * should be accessed when using iterators.
+     */
+    AddressRange(const address_type &first, const address_type &last, bool only_hosts = false)
+    : first(first), last(last), only_hosts(only_hosts)
+    {
+        if(last < first)
+            throw std::runtime_error("Invalid address range");
+    }
+
+    /**
+     * \brief Creates an address range from a base address
+     * and a network mask.
+     *
+     * \param first The base address.
+     * \param mask The network mask to be used.
+     */
+    static AddressRange from_mask(const address_type &first, const address_type &mask) {
+        return AddressRange<address_type>(
+            first, 
+            Internals::last_address_from_mask(first, mask), 
+            true
+        );
+    }
+
+    /**
+     * \brief Indicates whether an address is included in this range.
+     * \param addr The address to test.
+     * \return a bool indicating whether the address is in the range.
+     */
+    bool contains(const address_type &addr) const {
+        return (first < addr && addr < last) || addr == first || addr == last;
+    }
+
+    /**
+     * \brief Returns an interator to the beginning of this range.
+     * \brief const_iterator pointing to the beginning of this range.
+     */
+    const_iterator begin() const {
+        address_type addr = first;
+        if(only_hosts)
+            Internals::increment(addr);
+        return const_iterator(addr);
+    }
+
+    /**
+     * \brief Returns an interator to the end of this range.
+     * \brief const_iterator pointing to the end of this range.
+     */
+    const_iterator end() const {
+        address_type addr = last;
+        if(only_hosts)
+            Internals::decrement(addr);
+        return const_iterator(addr, typename const_iterator::end_iterator());
+    }
+
+    /**
+     * \brief Indicates whether this range is iterable.
+     *
+     * Iterable ranges are those for which there is at least one 
+     * address that could represent a host. For IPv4 ranges, a /31 or
+     * /32 ranges does not contain any, therefore it's not iterable.
+     * The same is true for /127 and /128 IPv6 ranges.
+     *
+     * If is_iterable returns false for a range, then iterating it
+     * through the iterators returned by begin() and end() is 
+     * undefined. 
+     * 
+     * \return bool indicating whether this range is iterable.
+     */
+    bool is_iterable() const {
+        // Since first < last, it's iterable
+        if(!only_hosts)
+            return true;
+        // We need that distance(first, last) >= 4
+        address_type addr(first);
+        for(int i = 0; i < 3; ++i) {
+            // If there's overflow before the last iteration, we're done
+            if(Internals::increment(addr) && i != 2)
+                return false;
+        }
+        // If addr <= last, it's OK.
+        return addr < last || addr == last;
+    }
+private:
+    address_type first, last;
+    bool only_hosts;
+};
+
+/**
+ * An IPv4 address range.
+ */
+typedef AddressRange<IPv4Address> IPv4Range;
+
+/**
+ * An IPv6 address range.
+ */
+typedef AddressRange<IPv6Address> IPv6Range;
+
+/**
+ * \brief Constructs an AddressRange from a base address and a mask.
+ * \param addr The range's first address.
+ * \param mask The bit-length of the prefix.
+ */
+template<size_t n>
+AddressRange<HWAddress<n> > operator/(const HWAddress<n> &addr, int mask) {
+    if(mask > 48)
+        throw std::logic_error("Prefix length cannot exceed 48");
+    HWAddress<n> last_addr;
+    typename HWAddress<n>::iterator it = last_addr.begin();
+    while(mask > 8) {
+        *it = 0xff;
+        ++it;
+        mask -= 8;
+    }
+    *it = 0xff << (8 - mask);
+    return AddressRange<HWAddress<6> >::from_mask(addr, last_addr);
+}
+
+/**
+ * \brief Constructs an IPv6Range from a base IPv6Address and a mask.
+ * \param addr The range's first address.
+ * \param mask The bit-length of the prefix.
+ */
+IPv6Range operator/(const IPv6Address &addr, int mask);
+
+/**
+ * \brief Constructs an IPv4Range from a base IPv4Address and a mask.
+ * \param addr The range's first address.
+ * \param mask The bit-length of the prefix.
+ */
+IPv4Range operator/(const IPv4Address &addr, int mask);
+} // namespace Tins
+
+#endif // TINS_ADDRESS_RANGE

include/tins/arp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,7 +42,8 @@ namespace Tins {
     class EthernetII;
 
     /**
-     * \brief Class that represents an ARP PDU.
+     * \class ARP
+     * \brief Represents an ARP PDU.
      *
      */
     class ARP : public PDU {
@@ -71,10 +72,18 @@ namespace Tins {
         };
 
         /**
-         * \brief Default constructor for ARP PDU objects.
-         *
+         * \brief Constructs an ARP object using the provided addresses.
+         * 
          * ARP requests and replies can be constructed easily using
-         * ARP::make_arp_request/reply static functions.
+         * ARP::make_arp_request/reply static member functions.
+         * 
+         * \sa ARP::make_arp_request
+         * \sa ARP::make_arp_reply
+         * 
+         * \param target_ip The target IP address.
+         * \param sender_ip The sender IP address.
+         * \param target_hw The target hardware address.
+         * \param sender_hw The sender hardware address.
          */
         ARP(ipaddress_type target_ip = ipaddress_type(), 
             ipaddress_type sender_ip = ipaddress_type(), 
@@ -82,8 +91,14 @@ namespace Tins {
             const hwaddress_type &sender_hw = hwaddress_type());
 
         /**
-         * \brief Constructor which creates an ARP object from a buffer and adds all identifiable
-         * PDUs found in the buffer as children of this one.
+         * \brief Constructs an ARP object from a buffer.
+         * 
+         * If there is not enough size for an ARP header in the buffer,
+         * a malformed_packet exception is thrown. 
+         * 
+         * If the buffer is bigger than the size of the ARP header, 
+         * then the extra data is stored in a RawPDU.
+         * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
          */
@@ -119,41 +134,42 @@ namespace Tins {
         ipaddress_type target_ip_addr() const { return ipaddress_type(_arp.ar_tip); }
 
         /**
-         * \brief Getter for the hardware address format.
+         * \brief Getter for the hardware address format field.
          *
          * \return The hardware address format.
          */
         uint16_t hw_addr_format() const { return Endian::be_to_host(_arp.ar_hrd); }
 
         /**
-         * \brief Getter for the protocol address format.
+         * \brief Getter for the protocol address format field.
          *
          * \return The protocol address format.
          */
         uint16_t prot_addr_format() const { return Endian::be_to_host(_arp.ar_pro); }
 
         /**
-         * \brief Getter for the hardware address length.
+         * \brief Getter for the hardware address length field.
          *
          * \return The hardware address length.
          */
         uint8_t hw_addr_length() const { return _arp.ar_hln; }
 
         /**
-         * \brief Getter for the protocol address length.
+         * \brief Getter for the protocol address length field.
          *
          * \return The protocol address length.
          */
         uint8_t prot_addr_length() const { return _arp.ar_pln; }
 
         /**
-         * \brief Getter for the ARP opcode.
+         * \brief Getter for the ARP opcode field.
          *
          * \return The ARP opcode.
          */
         uint16_t opcode() const { return Endian::be_to_host(_arp.ar_op); }
 
-        /** \brief Getter for the header size.
+        /** 
+         * \brief Getter for the header size.
          * \return Returns the ARP header size.
          * \sa PDU::header_size
          */
@@ -189,35 +205,35 @@ namespace Tins {
         void target_ip_addr(ipaddress_type new_tgt_ip_addr);
 
         /**
-         * \brief Setter for the hardware address format.
+         * \brief Setter for the hardware address format field.
          *
          * \param new_hw_addr_fmt The new hardware address format.
          */
         void hw_addr_format(uint16_t new_hw_addr_fmt);
 
         /**
-         * \brief Setter for the protocol address format.
+         * \brief Setter for the protocol address format field.
          *
          * \param new_prot_addr_fmt The new protocol address format.
          */
         void prot_addr_format(uint16_t new_prot_addr_fmt);
 
         /**
-         * \brief Setter for the hardware address length.
+         * \brief Setter for the hardware address length field.
          *
          * \param new_hw_addr_len The new hardware address length.
          */
         void hw_addr_length(uint8_t new_hw_addr_len);
 
         /**
-         * \brief Setter for the protocol address length.
+         * \brief Setter for the protocol address length field.
          *
          * \param new_prot_addr_len The new protocol address length.
          */
         void prot_addr_length(uint8_t new_prot_addr_len);
 
         /**
-         * \brief Setter for the ARP opcode.
+         * \brief Setter for the ARP opcode field.
          *
          * \param new_opcode Flag enum value of the ARP opcode to set.
          */
@@ -227,57 +243,46 @@ namespace Tins {
          * \brief Getter for the PDU's type.
          * \sa PDU::pdu_type
          */
-        PDUType pdu_type() const { return PDU::ARP; }
+        PDUType pdu_type() const { return pdu_flag; }
 
         /**
-         * \brief Creates an ARP Request within a Layer 2 PDU using uint32_t for target and sender.
+         * \brief Creates an ARP Request within an EthernetII PDU.
          *
-         * Creates an ARP Request PDU and embeds it within a Layer 2 PDU ready to be
-         * sent. The target and sender's protocol address are given using uint32_t.
+         * Creates an ARP Request PDU and embeds it inside an EthernetII
+         * PDU.
          *
-         * \param iface string with the interface from where to send the ARP.
-         * \param target IPv4Address with the target's IP.
-         * \param sender IPv4Address with the sender's IP.
-         * \param hw_snd uint8_t array of 6 bytes containing the sender's hardware address.
-         * \return Returns a EthernetII containing the ARP Request.
+         * \param target The target's IP address.
+         * \param sender The sender's IP address.
+         * \param hw_snd The sender's hardware address.
+         * \return EthernetII object containing the ARP Request.
          */
-        static EthernetII make_arp_request(const NetworkInterface& iface, ipaddress_type target, 
+        static EthernetII make_arp_request(ipaddress_type target, 
           ipaddress_type sender, const hwaddress_type &hw_snd = hwaddress_type());
 
         /**
-         * \brief Creates an ARP Reply within a Layer 2 PDU using uint32_t for target and sender.
+         * \brief Creates an ARP Reply within an EthernetII PDU.
          *
-         * Creates an ARP Reply PDU and embeds it within a Layer 2 PDU ready to be
-         * sent. The target and sender's protocol address are given using uint32_t.
+         * Creates an ARP Reply PDU and embeds it inside an EthernetII 
+         * PDU.
          *
-         * \param iface string with the interface from where to send the ARP.
-         * \param target IPv4Address with the target's IP.
-         * \param sender IPv4Address with the sender's IP.
-         * \param hw_tgt uint8_t array of 6 bytes containing the target's hardware address.
-         * \param hw_snd uint8_t array of 6 bytes containing the sender's hardware address.
-         * \return Returns an EthetnetII containing the ARP Replay.
+         * \param target The target's IP address.
+         * \param sender The sender's IP address.
+         * \param hw_tgt The target's hardware address.
+         * \param hw_snd The sender's hardware address.
+         * \return EthetnetII containing the ARP Replay.
          */
-        static EthernetII make_arp_reply(const NetworkInterface& iface, ipaddress_type target, 
+        static EthernetII make_arp_reply(ipaddress_type target, 
           ipaddress_type sender, const hwaddress_type &hw_tgt = hwaddress_type(), 
           const hwaddress_type &hw_snd = hwaddress_type());
 
-        /** \brief Check wether ptr points to a valid response for this PDU.
+        /** 
+         * \brief Check wether ptr points to a valid response for this PDU.
          *
          * \sa PDU::matches_response
          * \param ptr The pointer to the buffer.
          * \param total_sz The size of the buffer.
          */
-        bool matches_response(uint8_t *ptr, uint32_t total_sz);
-
-        /** \brief Clones this pdu, filling the corresponding header with data
-         * extracted from a buffer.
-         *
-         * \param ptr The pointer to the from from which the data will be extracted.
-         * \param total_sz The size of the buffer.
-         * \return The cloned PDU.
-         * \sa PDU::clone_packet
-         */
-        PDU *clone_packet(const uint8_t *ptr, uint32_t total_sz);
+        bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
         
         /**
          * \sa PDU::clone

include/tins/bootp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -43,6 +43,7 @@
 namespace Tins {
 
     /**
+     * \class BootP
      * \brief Class representing a BootP packet.
      */
     class BootP : public PDU {
@@ -84,8 +85,11 @@ namespace Tins {
         BootP();
 
         /**
-         * \brief Constructor which creates a BootP object from a buffer and adds all identifiable
-         * PDUs found in the buffer as children of this one.
+         * \brief Constructs a BootP object from a buffer .
+         * 
+         * If there's not enough size for a BootP header, then a 
+         * malformed_packet exception is thrown.
+         * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
          * \param vend_field_size The vend field size to allocate.
@@ -272,7 +276,8 @@ namespace Tins {
                 _bootp.chaddr
             );
             // Fill what's left with zeros
-            std::fill(end, _bootp.chaddr + chaddr_type::address_size, 0);
+            if(end < _bootp.chaddr + chaddr_type::address_size)
+                std::fill(end, _bootp.chaddr + chaddr_type::address_size, 0);
         }
 
         /** 
@@ -293,11 +298,22 @@ namespace Tins {
          */
         void vend(const vend_type &new_vend);
 
+        /**
+         * \brief Check wether ptr points to a valid response for this PDU.
+         *
+         * This returns true if the xid field is equal.
+         * 
+         * \sa PDU::matches_response
+         * \param ptr The pointer to the buffer.
+         * \param total_sz The size of the buffer.
+         */
+        bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
+
         /**
          * \brief Getter for the PDU's type.
          * \sa PDU::pdu_type
          */
-        PDUType pdu_type() const { return PDU::BOOTP; }
+        PDUType pdu_type() const { return pdu_flag; }
 
         /**
          * \sa PDU::clone

include/tins/config.h.in

@@ -0,0 +1,13 @@
+#ifndef TINS_CONFIG_H
+#define TINS_CONFIG_H
+
+/* Define if the compiler supports basic C++11 syntax */
+#cmakedefine HAVE_CXX11
+
+/* Have IEEE 802.11 support */
+#cmakedefine HAVE_DOT11
+
+/* Have WPA2 decryption library */
+#cmakedefine HAVE_WPA2_DECRYPTION
+
+#endif // TINS_CONFIG_H

include/tins/constants.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -84,6 +84,8 @@ namespace Tins {
                 VLAN = 0x8100,    /* IEEE 802.1Q VLAN tagging */
                 IPX = 0x8137,	  /* IPX */
                 IPV6 = 0x86dd,    /* IP protocol version 6 */
+                PPPOED = 0x8863, /* PPPoE Discovery */
+                PPPOES = 0x8864, /* PPPoE Session */
                 EAPOL = 0x888e,   /* EAPOL */
                 LOOPBACK = 0x9000 /* used to test interfaces */
             };

include/tins/crypto.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,22 +27,72 @@
  *
  */
 
-#ifndef TINS_CRYPTO_H
+#include "config.h"
+
+#if !defined(TINS_CRYPTO_H) && defined(HAVE_DOT11)
 #define TINS_CRYPTO_H
 
 #include <map>
 #include <string>
 #include <algorithm>
 #include <vector>
-#include "dot11.h"
 #include "utils.h"
 #include "snap.h"
 #include "rawpdu.h"
+#include "handshake_capturer.h"
 
 namespace Tins {
 class PDU;
+class Dot11;
+class Dot11Data;
 
 namespace Crypto {
+    /**
+     * \cond
+     */
+    struct RC4Key;
+    #ifdef HAVE_WPA2_DECRYPTION
+    namespace WPA2 {
+        class invalid_handshake : public std::exception {
+        public:
+            const char *what() const throw() {
+                return "invalid handshake";
+            }
+        };
+        class SessionKeys {
+        public:
+            typedef Internals::byte_array<80> ptk_type;
+            typedef Internals::byte_array<32> pmk_type;
+            
+            SessionKeys();
+            SessionKeys(const RSNHandshake &hs, const pmk_type &pmk);
+            SNAP *decrypt_unicast(const Dot11Data &dot11, RawPDU &raw) const;
+        private:
+            SNAP *ccmp_decrypt_unicast(const Dot11Data &dot11, RawPDU &raw) const;
+            SNAP *tkip_decrypt_unicast(const Dot11Data &dot11, RawPDU &raw) const;
+            RC4Key generate_rc4_key(const Dot11Data &dot11, const RawPDU &raw) const;
+
+            ptk_type ptk;
+            bool is_ccmp;
+        };
+            
+        class SupplicantData {
+        public:
+            typedef HWAddress<6> address_type;
+            typedef SessionKeys::pmk_type pmk_type;
+            
+            SupplicantData(const std::string &psk, const std::string &ssid);
+            
+            const pmk_type &pmk() const;
+        private:
+            pmk_type pmk_;
+        };
+    }
+    #endif // HAVE_WPA2_DECRYPTION
+    /**
+     * \endcond
+     */
+
     /**
      * \brief RC4 Key abstraction.
      */
@@ -65,11 +115,11 @@ namespace Crypto {
     };
 
     /**
-     * 
+     * \brief Decrypts WEP-encrypted traffic.
      */
     class WEPDecrypter {
     public:
-        typedef Dot11::address_type address_type;
+        typedef HWAddress<6> address_type;
     
         /**
          * \brief Constructs a WEPDecrypter object.
@@ -93,19 +143,18 @@ namespace Crypto {
         void remove_password(const address_type &addr);
         
         /**
-         * \brief Decrypts the provided PDU and forwards the decrypted
-         * PDU to the functor held by this object.
+         * \brief Decrypts the provided PDU.
          * 
          * A Dot11Data PDU is looked up inside the provided PDU chain.
          * If no such PDU exists or there is no password associated
          * with the Dot11 packet's BSSID, then the PDU is left intact. 
          * 
          * Otherwise, the packet is decrypted using the given password. 
-         * If the CRC found after decrypting it is invalid,
-         * then false is returned.
+         * If the CRC found after decrypting is invalid, false is 
+         * returned.
          * 
-         * \return false if decryption failed due to invalid CRC, true
-         * otherwise.
+         * \return false if no decryption was performed or decryption 
+         * failed, true otherwise.
          */
         bool decrypt(PDU &pdu);
     private:
@@ -117,6 +166,96 @@ namespace Crypto {
         std::vector<uint8_t> key_buffer;
     };
 
+    #ifdef HAVE_WPA2_DECRYPTION
+    /**
+     * \brief Decrypts WPA2-encrypted traffic.
+     *
+     * This class takes valid PSK and SSID tuples, captures client handshakes,
+     * and decrypts their traffic afterwards.
+     */
+    class WPA2Decrypter {
+    public:
+        /*
+         * \brief The type used to store Dot11 addresses.
+         */
+        typedef HWAddress<6> address_type;
+        
+        /**
+         * \brief Adds an access points's information.
+         *
+         * This associates an SSID with a PSK, and allows the decryption of
+         * any BSSIDs that broadcast the same SSID. 
+         * 
+         * The decrypter will inspect beacon frames, looking for SSID tags 
+         * that contain the given SSID.
+         *
+         * Note that using this overload, the decryption of data frames and
+         * handshake capturing will be disabled until any access point 
+         * broadcasts the provided SSID(this shouldn't take long at all). 
+         * If this is not the desired behaviour, then you should check out
+         * the ovther add_ap_data overload.
+         * 
+         * \param psk The PSK associated with the SSID.
+         * \param ssid The network's SSID.
+         */
+        void add_ap_data(const std::string &psk, const std::string &ssid);
+
+        /**
+         * \brief Adds a access points's information, including its BSSID.
+         *
+         * This overload can be used if the BSSID associated with this SSID is 
+         * known beforehand. The addr parameter indicates which specific BSSID 
+         * is associated to the SSID. 
+         * 
+         * Note that if any other access point broadcasts the provided SSID, 
+         * it will be taken into account as well.
+         * 
+         * \param psk The PSK associated with this SSID.
+         * \param ssid The network's SSID.
+         * \param addr The access point's BSSID.
+         */
+        void add_ap_data(const std::string &psk, const std::string &ssid, const address_type &addr);
+        
+        /**
+         * \brief Decrypts the provided PDU.
+         * 
+         * A Dot11Data PDU is looked up inside the provided PDU chain.
+         * If no such PDU exists or no PSK was associated with the SSID
+         * broadcasted by the Dot11 packet's BSSID, or no EAPOL handshake 
+         * was captured for the client involved in the communication, 
+         * then the PDU is left intact. 
+         * 
+         * Otherwise, the packet is decrypted using the generated PTK. 
+         * If the resulting MIC is invalid, then the packet is left intact.
+         * 
+         * \return false if no decryption was performed, or the decryption 
+         * failed, true otherwise.
+         */
+        bool decrypt(PDU &pdu);
+    private:
+        typedef std::map<std::string, WPA2::SupplicantData> pmks_map;
+        typedef std::map<address_type, WPA2::SupplicantData> bssids_map;
+        typedef std::pair<address_type, address_type> addr_pair;
+        typedef std::map<addr_pair, WPA2::SessionKeys> keys_map;
+        
+        void try_add_keys(const Dot11Data &dot11, const RSNHandshake &hs);
+        addr_pair make_addr_pair(const address_type &addr1, const address_type &addr2) {
+            return (addr1 < addr2) ? 
+                std::make_pair(addr1, addr2) :
+                std::make_pair(addr2, addr1);
+        }
+        addr_pair extract_addr_pair(const Dot11Data &dot11);
+        addr_pair extract_addr_pair_dst(const Dot11Data &dot11);
+        bssids_map::const_iterator find_ap(const Dot11Data &dot11);
+        void add_access_point(const std::string &ssid, const address_type &addr);
+
+        RSNHandshakeCapturer capturer;
+        pmks_map pmks;
+        bssids_map aps;
+        keys_map keys;
+    };
+    #endif // HAVE_WPA2_DECRYPTION
+
     /**
      * \brief Pluggable decrypter object which can be used to decrypt
      * data on sniffing sessions.
@@ -183,7 +322,7 @@ namespace Crypto {
     void rc4(ForwardIterator start, ForwardIterator end, RC4Key &key, OutputIterator output);
     
     /**
-     * \brief Wrapper function to create DecrypterProxyes using a 
+     * \brief Wrapper function to create a DecrypterProxy using a 
      * WEPDecrypter as the Decrypter template parameter.
      * 
      * \param functor The functor to be forwarded to the DecrypterProxy
@@ -191,6 +330,20 @@ namespace Crypto {
      */
     template<typename Functor>
     DecrypterProxy<Functor, WEPDecrypter> make_wep_decrypter_proxy(const Functor &functor);
+
+    #ifdef HAVE_WPA2_DECRYPTION
+    /**
+     * \brief Wrapper function to create a DecrypterProxy using a 
+     * WPA2Decrypter as the Decrypter template parameter.
+     * 
+     * \param functor The functor to be forwarded to the DecrypterProxy
+     * constructor.
+     */
+    template<typename Functor>
+    DecrypterProxy<Functor, WPA2Decrypter> make_wpa2_decrypter_proxy(const Functor &functor) {
+        return DecrypterProxy<Functor, WPA2Decrypter>(functor);
+    }
+    #endif // HAVE_WPA2_DECRYPTION
     
     // Implementation section
     
@@ -229,7 +382,7 @@ namespace Crypto {
     {
         return DecrypterProxy<Functor, WEPDecrypter>(functor);
     }
-    
+
     // RC4 stuff
     
     template<typename ForwardIterator>

include/tins/cxxstd.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -30,12 +30,29 @@
 #ifndef TINS_CXXSTD_H
 #define TINS_CXXSTD_H
 
+#include <memory>
+
 #ifdef __GXX_EXPERIMENTAL_CXX0X__
     #define TINS_CXXSTD_GCC_FIX 1
 #else
     #define TINS_CXXSTD_GCC_FIX 0
 #endif // __GXX_EXPERIMENTAL_CXX0X__
 
-#define TINS_IS_CXX11 (__cplusplus > 199711L || TINS_CXXSTD_GCC_FIX == 1)
+#ifndef TINS_IS_CXX11
+#define TINS_IS_CXX11 (__cplusplus > 199711L || TINS_CXXSTD_GCC_FIX == 1 || _MSC_VER >= 1800)
+#endif  // TINS_IS_CXX11
+
+namespace Tins{
+namespace Internals {
+template<typename T>
+struct smart_ptr {
+#if TINS_IS_CXX11
+    typedef std::unique_ptr<T> type;
+#else
+    typedef std::auto_ptr<T> type;
+#endif
+};
+}
+}
 
 #endif // TINS_CXXSTD_H

include/tins/data_link_type.h

@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TINS_DATA_LINK_TYPE_H
+#define TINS_DATA_LINK_TYPE_H
+
+#include <pcap.h>
+
+namespace Tins {
+
+class EthernetII;
+class RadioTap;
+class Dot11;
+class Dot3;
+class SLL;
+class Loopback;
+class PPI;
+
+/**
+ * \struct DataLinkType
+ * \brief Maps a libtins link layer PDU to a libpcap data link identifier.
+ *
+ * This is an empty class that should be instantiated with any object that 
+ * represents a link layer PDU (EthernetII, Dot11, RadioTap, etc):
+ *
+ * \code
+ * // Instantiate it and pass it to PacketWriter's constructor.
+ * PacketWriter writer("file.pcap", DataLinkType<RadioTap>());
+ * \endcode
+ */
+template<typename T>
+struct DataLinkType;
+
+#define TINS_MAKE_DATA_LINK_TYPE(tins_type, pcap_type) \
+template<> \
+struct DataLinkType<tins_type> { \
+    static const int type = pcap_type; \
+    int get_type() const { \
+        return type; \
+    } \
+}; 
+
+TINS_MAKE_DATA_LINK_TYPE(EthernetII, DLT_EN10MB)
+TINS_MAKE_DATA_LINK_TYPE(Dot3, DLT_EN10MB)
+TINS_MAKE_DATA_LINK_TYPE(SLL, DLT_LINUX_SLL)
+TINS_MAKE_DATA_LINK_TYPE(Loopback, DLT_LOOP)
+TINS_MAKE_DATA_LINK_TYPE(PPI, DLT_PPI)
+TINS_MAKE_DATA_LINK_TYPE(Dot11, DLT_IEEE802_11)
+TINS_MAKE_DATA_LINK_TYPE(RadioTap, DLT_IEEE802_11_RADIO)
+
+#undef TINS_MAKE_DATA_LINK_TYPE
+
+} // Tins
+
+#endif // TINS_DATA_LINK_TYPE_H

include/tins/dhcp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -32,15 +32,37 @@
 
 
 #include <list>
+#include <vector>
 #include <string>
 #include "bootp.h"
 #include "pdu_option.h"
+#include "cxxstd.h"
 
 namespace Tins {
     /** 
-     * \brief Class that represents the DHCP PDU.
+     * \class DHCP
+     * \brief Represents the DHCP PDU.
+     *
+     * This class represents a DHCP PDU. It contains helpers methods
+     * which make it easy to set/get specific option values.
      * 
-     * The end option is added automatically at the end of the option list.
+     * Note that when adding options, the "End" option is not added 
+     * automatically, so you will have to add it yourself.
+     *
+     * Options can be retrieved easily from DHCP PDUs:
+     *
+     * \code
+     * // Sniff a packet from somewhere
+     * DHCP dhcp = get_dhcp_from_somewhere();
+     * 
+     * // This retrieves the Domain Name Servers option and converts
+     * // it to a std::vector<IPv4Address>. Note that if this option
+     * // is not present, an option_not_found exception is thrown.
+     * for(const auto& address : dhcp.domain_name_servers()) {
+     *     // address is an ip
+     * }
+     * 
+     * \endcode
      */
     class DHCP : public BootP {
     public:
@@ -66,7 +88,7 @@ namespace Tins {
         /** 
          * \brief DHCP options enum.
          */
-        enum Options {
+        enum OptionTypes {
             PAD,
             SUBNET_MASK,
             TIME_OFFSET,
@@ -142,12 +164,12 @@ namespace Tins {
         /**
          * The DHCP option type.
          */
-        typedef PDUOption<uint8_t> dhcp_option;
+        typedef PDUOption<uint8_t, DHCP> option;
         
         /**
          * The type used to store the DHCP options.
          */
-        typedef std::list<dhcp_option> options_type;
+        typedef std::list<option> options_type;
         
         /** 
          * \brief Creates an instance of DHCP.
@@ -158,35 +180,57 @@ namespace Tins {
         DHCP();
         
         /**
-         * \brief Constructor which creates a DHCP object from a buffer and adds all identifiable
-         * PDUs found in the buffer as children of this one.
+         * \brief Constructs a DHCP object from a buffer.
+         * 
+         * If there is not enough size for a BootP header, or any of
+         * the TLV options contains an invalid size field, then a
+         * malformed_packet exception is thrown.
+         * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
-         * Subclasses might use 0 to provide their own interpretation of this field.
          */
         DHCP(const uint8_t *buffer, uint32_t total_sz);
         
         /** 
          * \brief Adds a new option to this DHCP PDU.
-         * \param option The option to be added.
+         * \param opt The option to be added.
          */
-        void add_option(const dhcp_option &option);
+        void add_option(const option &opt);
+        
+        #if TINS_IS_CXX11
+            /** 
+             * \brief Adds a new option to this DHCP PDU.
+             * 
+             * The option is move-constructed.
+             * 
+             * \param opt The option to be added.
+             */
+            void add_option(option &&opt) {
+                internal_add_option(opt);
+                _options.push_back(std::move(opt));
+            }
+        #endif 
     
         /**
          * \brief Searchs for an option that matchs the given flag.
          * \param opt_flag The flag to be searched.
          * \return A pointer to the option, or 0 if it was not found.
          */
-        const dhcp_option *search_option(Options opt) const;
+        const option *search_option(OptionTypes opt) const;
         
         /** 
-         * \brief Adds a type option the the option list.
+         * \brief Adds a type option to the option list.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param type The type of this DHCP PDU.
          */
         void type(Flags type);
         
         /** 
-         * \brief Adds an end option the the option list.
+         * \brief Adds an end option to the option list.
+         * 
+         * The new option is appended at the end of the list.
          * 
          * The END option is not added automatically. You should explicitly
          * add it at the end of the DHCP options for the PDU to be
@@ -196,70 +240,109 @@ namespace Tins {
         
         /** 
          * \brief Adds a server identifier option.
-         * \param ip The ip of the server.
+         * 
+         * The new option is appended at the end of the list.
+         * 
+         * \param ip The server's IP address.
          */
         void server_identifier(ipaddress_type ip);
         
         /** 
          * \brief Adds an IP address lease time option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param time The lease time.
          */
         void lease_time(uint32_t time);
         
         /** 
          * \brief Adds a lease renewal time option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param time The lease renew time.
          */
         void renewal_time(uint32_t time);
         
         /** 
          * \brief Adds a rebind time option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param time The lease rebind time.
          */
         void rebind_time(uint32_t time);
         
         /**
          * \brief Adds a subnet mask option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param mask The subnet mask.
          */
         void subnet_mask(ipaddress_type mask);
         
         /** 
          * \brief Adds a routers option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param routers A list of ip addresses.
          */
-        void routers(const std::list<ipaddress_type> &routers);
+        void routers(const std::vector<ipaddress_type> &routers);
         
         /** 
          * \brief Adds a domain name servers option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param dns A list of ip addresses.
          */
-        void domain_name_servers(const std::list<ipaddress_type> &dns);
+        void domain_name_servers(const std::vector<ipaddress_type> &dns);
         
         /** 
          * \brief Adds a broadcast address option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param addr The broadcast address.
          */
         void broadcast(ipaddress_type addr);
         
         /** 
          * \brief Adds a requested address option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param addr The requested address.
          */
         void requested_ip(ipaddress_type addr);
         
         /** 
          * \brief Adds a domain name option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
          * \param name The domain name.
          */
         void domain_name(const std::string &name);
+
+        /** 
+         * \brief Adds a hostname option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
+         * \param name The hostname.
+         */
+        void hostname(const std::string &name);
         
         // Option getters
         
         /**
          * \brief Searchs for a type option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return uint8_t containing the type option.
@@ -269,7 +352,7 @@ namespace Tins {
         /**
          * \brief Searchs for a server identifier option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return ipaddress_type Containing the server identifier.
@@ -279,7 +362,7 @@ namespace Tins {
         /**
          * \brief Searchs for a lease time option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return uint32_t Containing the lease time.
@@ -289,7 +372,7 @@ namespace Tins {
         /**
          * \brief Searchs for a lease renewal time option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return uint32_t Containing the renewal time.
@@ -299,7 +382,7 @@ namespace Tins {
         /**
          * \brief Searchs for a rebind time option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return uint32_t Containing the rebind time.
@@ -309,7 +392,7 @@ namespace Tins {
         /**
          * \brief Searchs for a subnet mask option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return ipaddress_type Containing the subnet mask.
@@ -319,29 +402,29 @@ namespace Tins {
         /**
          * \brief Searchs for a routers option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
-         * \return std::list<ipaddress_type> Containing the routers 
+         * \return std::vector<ipaddress_type> Containing the routers 
          * option data.
          */
-        std::list<ipaddress_type> routers() const;
+        std::vector<ipaddress_type> routers() const;
         
         /**
          * \brief Searchs for a dns option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return std::list<ipaddress_type> Contanining the DNS servers
          * provided.
          */
-        std::list<ipaddress_type> domain_name_servers() const; 
+        std::vector<ipaddress_type> domain_name_servers() const; 
         
         /**
          * \brief Searchs for a broadcast option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return ipaddress_type Containing the broadcast address.
@@ -351,7 +434,7 @@ namespace Tins {
         /**
          * \brief Searchs for a requested option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return ipaddress_type Containing the requested IP address.
@@ -361,14 +444,25 @@ namespace Tins {
         /**
          * \brief Searchs for a domain name option.
          * 
-         * If the option is not found, a option_not_found exception
+         * If the option is not found, an option_not_found exception
          * is thrown.
          * 
          * \return std::string Containing the domain name.
          */
         std::string domain_name() const;
+
+        /**
+         * \brief Searchs for a hostname option.
+         * 
+         * If the option is not found, an option_not_found exception
+         * is thrown.
+         * 
+         * \return std::string Containing the hostname.
+         */
+        std::string hostname() const;
         
-        /** \brief Getter for the options list.
+        /** 
+         * \brief Getter for the options list.
          * \return The option list.
          */
         const options_type options() const { return _options; }
@@ -377,7 +471,7 @@ namespace Tins {
          * \brief Getter for the PDU's type.
          * \sa PDU::pdu_type
          */
-        PDUType pdu_type() const { return PDU::DHCP; }
+        PDUType pdu_type() const { return pdu_flag; }
         
         /** 
          * \brief Getter for the header size.
@@ -394,26 +488,19 @@ namespace Tins {
         }
     private:
         static const uint32_t MAX_DHCP_SIZE;
-        
-        template<typename T>
-        struct type2type {};
       
         void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
-        
+
         template<class T> 
-        T generic_search(Options opt, type2type<T>) const {
-            const dhcp_option *option = search_option(opt);
-            if(option && option->data_size() == sizeof(T))
-                return *(const T*)option->data_ptr();
-            else
+        T search_and_convert(OptionTypes opt) const {
+            const option *option = search_option(opt);
+            if(!option)
                 throw option_not_found();
+            return option->to<T>();
         }
         
-        std::list<ipaddress_type> generic_search(Options opt, type2type<std::list<ipaddress_type> >) const;
-        std::string generic_search(Options opt, type2type<std::string>) const;
-        ipaddress_type generic_search(Options opt, type2type<ipaddress_type>) const;
-        
-        serialization_type serialize_list(const std::list<ipaddress_type> &ip_list);
+        void internal_add_option(const option &opt);
+        serialization_type serialize_list(const std::vector<ipaddress_type> &ip_list);
         
         options_type _options;
         uint32_t _size;

include/tins/dhcpv6.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -30,6 +30,7 @@
 #ifndef TINS_DHCPV6_H
 #define TINS_DHCPV6_H
 
+#include <cstring>
 #include <list>
 #include "pdu.h"
 #include "endianness.h"
@@ -39,86 +40,15 @@
 
 namespace Tins {    
 /**
- * Represents a DHCPv6 PDU.
+ * \class DHCPv6
+ * \brief Represents a DHCPv6 PDU.
  */
 class DHCPv6 : public PDU {
 public:
     /**
      * Represents a DHCPv6 option. 
      */
-    class dhcpv6_option {
-    public:
-        typedef std::vector<uint8_t> container_type;
-        typedef container_type::value_type data_type;
-        typedef uint16_t option_type;
-
-        /**
-         * \brief Constructs a PDUOption.
-         * \param opt The option type.
-         * \param length The option's data length.
-         * \param data The option's data(if any).
-         */
-        dhcpv6_option(option_type opt = 0, size_t length = 0, const data_type *data = 0) 
-        : option_(opt), option_size_(length) {
-            if(data)
-                value_.insert(value_.end(), data, data + length);
-        }
-        
-        /**
-         * \brief Constructs a PDUOption from iterators, which 
-         * indicate the data to be stored in it.
-         * 
-         * \param opt The option type.
-         * \param start The beginning of the option data.
-         * \param end The end of the option data.
-         */
-        template<typename ForwardIterator>
-        dhcpv6_option(option_type opt, ForwardIterator start, ForwardIterator end) 
-        : option_(opt), option_size_(std::distance(start, end))
-        {
-            value_.insert(value_.end(), start, end);
-        }
-        
-        /**
-         * Retrieves this option's type.
-         * \return uint8_t containing this option's size.
-         */
-        uint16_t option() const {
-            return option_;
-        }
-        
-        /**
-         * Sets this option's type
-         * \param opt The option type to be set.
-         */
-        void option(uint16_t opt) {
-            option_ = opt;
-        }
-        
-        /**
-         * Retrieves this option's data.
-         * 
-         * If this method is called when data_size() == 0, 
-         * dereferencing the returned pointer will result in undefined
-         * behaviour.
-         * 
-         * \return const data_type& containing this option's value.
-         */
-        const data_type *data_ptr() const {
-            return &*value_.begin();
-        }
-        
-        /**
-         * Retrieves the length of this option's data.
-         */
-        uint16_t data_size() const {
-            return option_size_;
-        }
-    private:
-        option_type option_;
-        uint16_t option_size_;
-        container_type value_;
-    };
+    typedef PDUOption<uint16_t, DHCPv6> option;
 
     /**
      * The message types.
@@ -146,7 +76,7 @@ public:
     /**
      * The DHCPv6 options.
      */
-    enum Option {
+    enum OptionTypes {
         CLIENTID = 1, 
         SERVERID, 
         IA_NA, 
@@ -226,7 +156,7 @@ public:
     /**
      * The type used to store the DHCPv6 options.
      */
-    typedef std::list<dhcpv6_option> options_type;
+    typedef std::list<option> options_type;
 
     /**
      * The type used to store IP addresses.
@@ -251,6 +181,8 @@ public:
         ia_na_type(uint32_t id = 0, uint32_t t1 = 0, uint32_t t2 = 0,
           const options_type& options = options_type())
         : id(id), t1(t1), t2(t2), options(options) {}
+
+        static ia_na_type from_option(const option &opt);
     };
     
     /**
@@ -266,6 +198,8 @@ public:
         ia_ta_type(uint32_t id = 0,
           const options_type& options = options_type())
         : id(id), options(options) {}
+
+        static ia_ta_type from_option(const option &opt);
     };
 
     /**
@@ -283,6 +217,8 @@ public:
           const options_type& options = options_type())
         : address(address), preferred_lifetime(preferred_lifetime), 
           valid_lifetime(valid_lifetime), options(options) {}
+
+        static ia_address_type from_option(const option &opt);
     };
     
     /**
@@ -300,6 +236,8 @@ public:
           const auth_info_type &auth_info = auth_info_type())
         : protocol(protocol), algorithm(algorithm), rdm(rdm),
         replay_detection(replay_detection), auth_info(auth_info) {}
+
+        static authentication_type from_option(const option &opt);
     };
     
     /**
@@ -311,6 +249,8 @@ public:
         
         status_code_type(uint16_t code = 0, const std::string &message = "")
         : code(code), message(message) { }
+
+        static status_code_type from_option(const option &opt);
     };
     
     /**
@@ -325,6 +265,8 @@ public:
         vendor_info_type(uint32_t enterprise_number = 0, 
           const data_type &data = data_type())
         : enterprise_number(enterprise_number), data(data) { }
+
+        static vendor_info_type from_option(const option &opt);
     };
     
     
@@ -336,7 +278,19 @@ public:
     /**
      * The type used to store the User Class option.
      */
-    typedef std::vector<class_option_data_type> user_class_type;
+    //typedef std::vector<class_option_data_type> user_class_type;
+    struct user_class_type {
+        typedef std::vector<class_option_data_type> data_type;
+        data_type data;
+
+        user_class_type(const data_type &data = data_type())
+        : data(data)
+        {
+
+        }
+
+        static user_class_type from_option(const option &opt);
+    };
     
     /**
      * The type used to store the Vendor Class option.
@@ -351,6 +305,8 @@ public:
           const class_data_type &vendor_class_data = class_data_type())
         : enterprise_number(enterprise_number), 
         vendor_class_data(vendor_class_data) { }
+
+        static vendor_class_type from_option(const option &opt);
     };
     
     /**
@@ -433,12 +389,14 @@ public:
         
         duid_type(const duid_ll &identifier)
         : id(duid_en::duid_id), data(identifier.serialize()) {}
+
+        static duid_type from_option(const option &opt);
     };
         
     /**
      * The type used to store the Option Request option.
      */
-    typedef std::vector<Option> option_request_type;
+    typedef std::vector<uint16_t> option_request_type;
     
     /**
      * The type used to store the Relay Message option.
@@ -456,9 +414,12 @@ public:
     DHCPv6();
     
     /**
-     * \brief Constructor which constructs a DHCPv6 object from a buffer 
-     * and adds all identifiable PDUs found in the buffer as children 
-     * of this one.
+     * \brief Constructs a DHCPv6 object from a buffer.
+     * 
+     * If there is not enough size for the DHCPv6 header, or any
+     * of the TLV options contains an invalid size field, a 
+     * malformed_packet exception is thrown.
+     * 
      * \param buffer The buffer from which this PDU will be constructed.
      * \param total_sz The total size of the buffer.
      */
@@ -511,7 +472,6 @@ public:
      * \return The stored options.
      */
     const options_type &options() const { return options_; }
- ;
 
     // Setters
     /**
@@ -851,9 +811,9 @@ public:
      * The option is added after the last option in the option 
      * fields.
      * 
-     * \param option The option to be added
+     * \param opt The option to be added
      */
-    void add_option(const dhcpv6_option &option);
+    void add_option(const option &opt);
     
     /**
      * \brief Searchs for an option that matchs the given flag.
@@ -864,7 +824,7 @@ public:
      * 
      * \param id The option identifier to be searched.
      */
-    const dhcpv6_option *search_option(Option id) const;
+    const option *search_option(OptionTypes id) const;
 
     // PDU stuff
     
@@ -875,6 +835,15 @@ public:
      */
     uint32_t header_size() const;
     
+        /** 
+     * \brief Check wether ptr points to a valid response for this PDU.
+     *
+     * \sa PDU::matches_response
+     * \param ptr The pointer to the buffer.
+     * \param total_sz The size of the buffer.
+     */
+    bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
+    
     /**
      * \brief Getter for the PDU's type.
      * \sa PDU::pdu_type
@@ -889,61 +858,72 @@ public:
     }
 private:
     void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *);
-    uint8_t* write_option(const dhcpv6_option &option, uint8_t* buffer) const;
+    uint8_t* write_option(const option &option, uint8_t* buffer) const;
     
     template<template <typename> class Functor>
-    const dhcpv6_option *safe_search_option(Option opt, uint32_t size) const {
-        const dhcpv6_option *option = search_option(opt);
+    const option *safe_search_option(OptionTypes opt, uint32_t size) const {
+        const option *option = search_option(opt);
         if(!option || Functor<uint32_t>()(option->data_size(), size))
             throw option_not_found();
         return option;
     }
-    
-    template<typename InputIterator>
-    void class_option_data2option(InputIterator start, InputIterator end, 
-      std::vector<uint8_t>& buffer, size_t start_index = 0) 
-    {
-        size_t index = start_index;
-        while(start != end) {
-            buffer.resize(buffer.size() + sizeof(uint16_t) + start->size());
-            *(uint16_t*)&buffer[index] = Endian::host_to_be<uint16_t>(start->size());
-            index += sizeof(uint16_t);
-            std::copy(start->begin(), start->end(), buffer.begin() + index);
-            index += start->size();
-            
-            start++;
-        }
-    }
-    
-    template<typename OutputType>
-    OutputType option2class_option_data(const uint8_t *ptr, uint32_t total_sz) const
-    {
-        typedef typename OutputType::value_type value_type;
-        OutputType output;
-        size_t index = 0;
-        while(index + 2 < total_sz) {
-            uint16_t size = Endian::be_to_host(
-                *(const uint16_t*)(ptr + index)
-            );
-            index += sizeof(uint16_t);
-            if(index + size > total_sz)
-                throw option_not_found();
-            output.push_back(
-                value_type(ptr + index, ptr + index + size)
-            );
-            index += size;
-        }
-        if(index != total_sz)
+
+    template<typename T>
+    T search_and_convert(OptionTypes opt) const {
+        const option *option = search_option(opt);
+        if(!option)
             throw option_not_found();
-        return output;
+        return option->to<T>();
     }
-    
 
     uint8_t header_data[4];
     uint32_t options_size;
     ipaddress_type link_addr, peer_addr;
     options_type options_;
-};    
+};   
+
+namespace Internals {
+template<typename InputIterator>
+void class_option_data2option(InputIterator start, InputIterator end, 
+  std::vector<uint8_t>& buffer, size_t start_index = 0) 
+{
+    size_t index = start_index;
+    uint16_t uint16_t_buffer;
+    while(start != end) {
+        buffer.resize(buffer.size() + sizeof(uint16_t) + start->size());
+        uint16_t_buffer = Endian::host_to_be<uint16_t>(start->size());
+        std::memcpy(&buffer[index], &uint16_t_buffer, sizeof(uint16_t));
+        index += sizeof(uint16_t);
+        std::copy(start->begin(), start->end(), buffer.begin() + index);
+        index += start->size();
+        
+        start++;
+    }
+}
+
+template<typename OutputType>
+OutputType option2class_option_data(const uint8_t *ptr, uint32_t total_sz)
+{
+    typedef typename OutputType::value_type value_type;
+    OutputType output;
+    size_t index = 0;
+    while(index + 2 < total_sz) {
+        uint16_t size;
+        std::memcpy(&size, ptr + index, sizeof(uint16_t));
+        size = Endian::be_to_host(size);
+        index += sizeof(uint16_t);
+        if(index + size > total_sz)
+            throw option_not_found();
+        output.push_back(
+            value_type(ptr + index, ptr + index + size)
+        );
+        index += size;
+    }
+    if(index != total_sz)
+        throw malformed_option();
+    return output;
+}
+} 
 }
 
 #endif // TINS_DHCPV6_H

include/tins/dns.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -39,7 +39,6 @@
 #include "macros.h"
 #include "pdu.h"
 #include "endianness.h"
-#include "dns_record.h"
 
 namespace Tins {
     class IPv4Address;
@@ -48,6 +47,27 @@ namespace Tins {
     /**
      * \class DNS
      * \brief Represents a DNS PDU.
+     *
+     * This class represents the DNS PDU, and allows easy access
+     * to queries and answer records. 
+     *
+     * The DNS PDU is not parsed automatically while sniffing, so you will
+     * have to parse it manually from an UDP packet's payload, for example:
+     *
+     * \code
+     * // Assume we get an udp packet from somewhere.
+     * UDP udp = get_udp_packet();
+     *
+     * // Now:
+     * // 1 - Get the RawPDU layer (contains the payload).
+     * // 2 - Construct a DNS object over its contents.
+     * DNS dns = udp.rfind_pdu<RawPDU>().to<DNS>();
+     *
+     * // Now use the DNS object!
+     * for(const auto& query : dns.queries()) {
+     *     // Process a query
+     * }
+     * \endcode
      */
     class DNS : public PDU {
     public:
@@ -200,14 +220,24 @@ namespace Tins {
          */
         class Resource {
         public:
-            Resource(const std::string &nm, const std::string &ad, 
-              uint16_t t, uint16_t c, uint32_t tt) 
-            : dname_(nm), addr_(ad), type_(t), qclass_(c), ttl_(tt) {}
+            /**
+             * Constructs a Resource object.
+             *
+             * \param dname The domain name for which this records 
+             * provides an answer.
+             * \param data The resource's payload.
+             * \param type The type of this record.
+             * \param rclass The class of this record.
+             * \param ttl The time-to-live of this record.
+             */
+            Resource(const std::string &dname, const std::string &data, 
+              uint16_t type, uint16_t rclass, uint32_t ttl) 
+            : dname_(dname), data_(data), type_(type), qclass_(rclass), ttl_(ttl) {}
             
             Resource() : type_(), qclass_(), ttl_() {}
             
             /**
-             * \brief Getter for the dname field.
+             * \brief Getter for the domain name field.
              * 
              * This returns the domain name for which this record 
              * provides an answer.
@@ -215,9 +245,9 @@ namespace Tins {
             const std::string &dname() const { return dname_; }
             
             /**
-             * Getter for the type field.
+             * Getter for the data field. 
              */
-            const std::string &data() const { return addr_; }
+            const std::string &data() const { return data_; }
             
             /**
              * Getter for the query type field.
@@ -233,8 +263,52 @@ namespace Tins {
              * Getter for the type field.
              */
             uint32_t ttl() const { return ttl_; }
+
+            /**
+             * Setter for the domain name field.
+             */
+            void dname(const std::string &data) {
+                dname_ = data;
+            }
+
+            /**
+             * \brief Setter for the data field.
+             *
+             * The data will be encoded properly by the DNS class before
+             * being added to this packet. That means that if the type is
+             * A or AAAA, it will be properly encoded as an IPv4 or
+             * IPv6 address. 
+             * 
+             * The same happens for records that contain domain names,
+             * such as NS or CNAME. This data will be encoded using 
+             * DNS domain name encoding.
+             */
+            void data(const std::string &data) {
+                data_ = data;
+            }
+
+            /**
+             * Setter for the type field.
+             */
+            void type(uint16_t data) {
+                type_ = data;
+            }
+
+            /**
+             * Setter for the class field.
+             */
+            void query_class(uint16_t data) {
+                qclass_ = data;
+            }
+
+            /**
+             * Setter for the time-to-live field.
+             */
+            void ttl(uint16_t data) {
+                ttl_ = data;
+            }
         private:
-            std::string dname_, addr_;
+            std::string dname_, data_;
             uint16_t type_, qclass_;
             uint32_t ttl_;
         };
@@ -252,7 +326,11 @@ namespace Tins {
         DNS();
         
         /**
-         * \brief Constructor which creates a DNS object from a buffer.
+         * \brief Constructs a DNS object from a buffer.
+         * 
+         * If there's not enough size for the DNS header, or any of the
+         * records are malformed, a malformed_packet is be thrown.
+         * 
          * \param buffer The buffer from which this PDU will be 
          * constructed.
          * \param total_sz The total size of the buffer.
@@ -478,93 +556,79 @@ namespace Tins {
         void add_query(const Query &query);
         
         /**
-         * \brief Add a query response.
+         * \brief Add an answer resource record.
          * 
-         * \param name The resolved name.
-         * \param type The type of this answer.
-         * \param qclass The class of this answer.
-         * \param ttl The time-to-live of this answer.
-         * \param ip The ip address of the resolved name.
+         * \param resource The resource to be added.
          */
-        void add_answer(const std::string &name, 
-          const DNSResourceRecord::info &info, address_type ip);
-          
+        void add_answer(const Resource &resource);
+
         /**
-         * \brief Add a query response.
+         * \brief Add an authority resource record.
          * 
-         * \param name The resolved name.
-         * \param type The type of this answer.
-         * \param qclass The class of this answer.
-         * \param ttl The time-to-live of this answer.
-         * \param ip The ip address of the resolved name.
+         * \param resource The resource to be added.
          */
-        void add_answer(const std::string &name, 
-          const DNSResourceRecord::info &info, address_v6_type ip);
-                        
-        /**
-         * \brief Add a query response.
-         * 
-         * \param name The resolved name.
-         * \param type The type of this answer.
-         * \param qclass The class of this answer.
-         * \param ttl The time-to-live of this answer.
-         * \param dname The domain of the resolved name.
-         */
-        void add_answer(const std::string &name, 
-          const DNSResourceRecord::info &info, const std::string &dname);
-                        
-        /**
-         * \brief Add a query response.
-         * 
-         * \param name The resolved name.
-         * \param type The type of this answer.
-         * \param qclass The class of this answer.
-         * \param ttl The time-to-live of this answer.
-         * \param data The data of this option.
-         * \param sz The size of the data.
-         */
-        void add_answer(const std::string &name, 
-          const DNSResourceRecord::info &info, const uint8_t *data, uint32_t sz);
+        void add_authority(const Resource &resource);
         
         /**
-         * \brief Add an authority record.
+         * \brief Add an additional resource record.
          * 
-         * \param name The resolved name.
-         * \param type The type of this record.
-         * \param qclass The class of this record.
-         * \param ttl The time-to-live of this record.
-         * \param data The data of this option.
-         * \param sz The size of the data.
+         * \param resource The resource to be added.
          */
-        void add_authority(const std::string &name, 
-          const DNSResourceRecord::info &info, const uint8_t *data, uint32_t sz);
-        
-        /**
-         * \brief Add an additional record.
-         * 
-         * \param name The resolved name.
-         * \param type The type of this record.
-         * \param qclass The class of this record.
-         * \param ttl The time-to-live of this record.
-         * \param ip The ip address of the resolved name.
-         */
-        void add_additional(const std::string &name, 
-          const DNSResourceRecord::info &info, uint32_t ip);
-                        
+        void add_additional(const Resource &resource);
         
         /**
          * \brief Getter for this PDU's DNS queries.
-         * \return std::list<Query> containing the queries in this
-         * record.
+         * 
+         * \return The query records in this PDU.
          */
         queries_type queries() const;
         
         /**
          * \brief Getter for this PDU's DNS answers
-         * \return std::list<Resource> containing the answers in this
-         * record.
+         * 
+         * \return The answer records in this PDU.
          */
         resources_type answers() const;
+
+        /**
+         * \brief Getter for this PDU's DNS authority records.
+         * 
+         * \return The authority records in this PDU.
+         */
+        resources_type authority() const;
+
+        /**
+         * \brief Getter for this PDU's DNS additional records.
+         * 
+         * \return The additional records in this PDU.
+         */
+        resources_type additional() const;
+        
+        /**
+         * \brief Encodes a domain name.
+         *
+         * This processes the input domain name and returns the encoded 
+         * version. Each label in the original domain name will be 
+         * prefixed with a byte that indicates the label's length. 
+         * The null-terminator byte <b>will</b> be included in the encoded
+         * string. No compression is performed.
+         *
+         * For example, given the input "www.example.com", the output would
+         * be "\x03www\x07example\x03com\x00".
+         * 
+         * \param domain_name The domain name to encode.
+         * \return The encoded domain name.
+         */
+        static std::string encode_domain_name(const std::string &domain_name);
+
+        /** 
+         * \brief Check wether ptr points to a valid response for this PDU.
+         *
+         * \sa PDU::matches_response
+         * \param ptr The pointer to the buffer.
+         * \param total_sz The size of the buffer.
+         */
+        bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
         
         /**
          * \sa PDU::clone
@@ -572,17 +636,6 @@ namespace Tins {
         DNS *clone() const {
             return new DNS(*this);
         }
-        
-        /**
-         * Helper function to create a resource record information
-         * 
-         * \param type The type of the query.
-         * \param qclass The class of the query.
-         * \param ttl The time-to-live of the query.
-         */
-        static DNSResourceRecord::info make_info(QueryType type, QueryClass qclass, uint32_t ttl) {
-            return DNSResourceRecord::info((uint16_t)type, (uint16_t)qclass, ttl);
-        }
     private:
         TINS_BEGIN_PACK
         struct dnshdr {
@@ -616,35 +669,23 @@ namespace Tins {
                      authority, additional;
         } TINS_END_PACK;
         
-        typedef std::map<uint16_t, std::string> SuffixMap;
-        typedef std::map<uint16_t, uint16_t> SuffixIndices;
-        typedef std::list<DNSResourceRecord> ResourcesType;
         typedef std::list<Query> QueriesType;
+        typedef std::vector<std::pair<uint32_t*, uint32_t> > sections_type;
         
-        const uint8_t *build_resource_list(ResourcesType &lst, const uint8_t *ptr, uint32_t &sz, uint16_t nrecs);
-        uint32_t find_domain_name(const std::string &dname);
-        bool find_domain_name(const std::string &dname, const ResourcesType &lst, uint16_t &out);
-        void parse_domain_name(const std::string &dn, std::string &out) const;
-        void unparse_domain_name(const std::string &dn, std::string &out) const;
-        void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
-        uint8_t *serialize_list(const ResourcesType &lst, uint8_t *buffer) const;
-        void compose_name(const uint8_t *ptr, uint32_t sz, std::string &out) const;
-        void convert_resources(const ResourcesType &lst, std::list<Resource> &res) const;
-        DNSResourceRecord make_record(const std::string &name, const DNSResourceRecord::info &info, uint32_t ip);
-        DNSResourceRecord make_record(const std::string &name, const DNSResourceRecord::info &info, const std::string &dname);
-        DNSResourceRecord make_record(const std::string &name, const DNSResourceRecord::info &info, const uint8_t *ptr, uint32_t len);
-        void add_suffix(uint32_t index, const uint8_t *data, uint32_t sz) const;
-        uint32_t build_suffix_map(uint32_t index, const ResourcesType &lst) const;
-        uint32_t build_suffix_map(uint32_t index, const QueriesType &lst) const;
-        void build_suffix_map() const ;
+        const uint8_t* compose_name(const uint8_t *ptr, char *out_ptr) const;
+        void convert_records(const uint8_t *ptr, const uint8_t *end, resources_type &res) const;
+        const uint8_t* find_section_end(const uint8_t *ptr, const uint32_t num_records) const;
+        const uint8_t* find_dname_end(const uint8_t *ptr) const;
+        void update_records(uint32_t &section_start, uint32_t num_records, uint32_t threshold, uint32_t offset);
+        uint8_t *update_dname(uint8_t *ptr, uint32_t threshold, uint32_t offset);
+        static void inline_convert_v4(uint32_t value, char *output);
         static bool contains_dname(uint16_t type);
+        void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
+        void add_record(const Resource &resource, const sections_type &sections);
         
         dnshdr dns;
-        uint32_t extra_size;
-        std::list<Query> queries_;
-        ResourcesType ans, arity, addit;
-        mutable SuffixMap suffixes;
-        mutable SuffixIndices suffix_indices;
+        byte_array records_data;
+        uint32_t answers_idx, authority_idx, additional_idx;
     };
 }
 

include/tins/dot11.h

@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "config.h"
+
+#if !defined(TINS_DOT_11) && defined(HAVE_DOT11)
+#define TINS_DOT_11
+
+#include "dot11/dot11_base.h"
+#include "dot11/dot11_data.h"
+#include "dot11/dot11_mgmt.h"
+#include "dot11/dot11_beacon.h"
+#include "dot11/dot11_assoc.h"
+#include "dot11/dot11_auth.h"
+#include "dot11/dot11_probe.h"
+#include "dot11/dot11_control.h"
+
+#endif // TINS_DOT_11

include/tins/dot11/CMakeLists.txt

@@ -0,0 +1,6 @@
+FILE(GLOB INCLUDE_FILES "*.h")
+INSTALL(
+    FILES ${INCLUDE_FILES} 
+    DESTINATION include/tins/dot11
+    COMPONENT Headers
+)

include/tins/dot11/dot11_assoc.h

@@ -0,0 +1,622 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_ASSOC_H) && defined(HAVE_DOT11)
+#define TINS_DOT11_DOT11_ASSOC_H
+
+#include "../dot11/dot11_mgmt.h"
+
+namespace Tins {
+/**
+ * \brief Class representing a Disassociation frame in the IEEE 802.11 Protocol.
+ *
+ */
+class Dot11Disassoc : public Dot11ManagementFrame {
+public:
+   /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_DIASSOC;
+
+    /**
+     * \brief Constructor for creating a 802.11 Disassociation.
+     *
+     * Constructs a 802.11 Disassociation taking the destination
+     * and source hardware address.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11Disassoc(const address_type &dst_hw_addr = address_type(), 
+                const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11Disassoc object from a buffer and 
+     * adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     *
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11Disassoc(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the reason code field.
+     *
+     * \return The stored reason code.
+     */
+    uint16_t reason_code() const { return Endian::le_to_host(_body.reason_code); }
+
+    /**
+     * \brief Setter for the reason code field.
+     *
+     * \param new_reason_code The reason code to be set.
+     */
+    void reason_code(uint16_t new_reason_code);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11Disassoc *clone() const {
+        return new Dot11Disassoc(*this);
+    }
+private:
+    struct DisassocBody {
+        uint16_t reason_code;
+    };
+
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+    DisassocBody _body;
+};
+
+/**
+ * \brief Class representing an Association Request frame in the IEEE 802.11 Protocol.
+ *
+ */
+class Dot11AssocRequest : public Dot11ManagementFrame {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_ASSOC_REQ;
+
+    /**
+     * \brief Constructor for creating a 802.11 Association Request.
+     *
+     * Constructs a 802.11 Association Request taking the
+     * destination and source hardware address.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11AssocRequest(const address_type &dst_hw_addr = address_type(), 
+                    const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11AssocRequest object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     *
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11AssocRequest(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the Capabilities Information.
+     *
+     * \return A constant refereence to the stored Capabilities 
+     * Information field.
+     */
+    const capability_information& capabilities() const { return _body.capability;}
+
+    /**
+     * \brief Getter for the Capabilities Information.
+     *
+     * \return A refereence to the stored Capabilities Information 
+     * field.
+     */
+    capability_information& capabilities() { return _body.capability;}
+
+    /**
+     * \brief Getter for the listen interval field.
+     *
+     * \return The stored listen interval field.
+     */
+    uint16_t listen_interval() const { return Endian::le_to_host(_body.listen_interval); }
+
+    /**
+     * \brief Setter for the listen interval field.
+     *
+     * \param new_listen_interval The listen interval to be set.
+     */
+    void listen_interval(uint16_t new_listen_interval);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11AssocRequest *clone() const {
+        return new Dot11AssocRequest(*this);
+    }
+private:
+    struct AssocReqBody {
+        capability_information capability;
+        uint16_t listen_interval;
+    };
+
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+    AssocReqBody _body;
+};
+
+/**
+ * \brief Class representing an Association Response frame in the IEEE 802.11 Protocol.
+ *
+ */
+class Dot11AssocResponse : public Dot11ManagementFrame {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_ASSOC_RESP;
+
+    /**
+     * \brief Constructor for creating a 802.11 Association Response.
+     *
+     * Constructors a 802.11 Association Response taking destination 
+     * and source hardware address.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11AssocResponse(const address_type &dst_hw_addr = address_type(), 
+                        const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructor which creates a Dot11AssocResponse object 
+     * from a buffer and adds all identifiable PDUs found in the 
+     * buffer as children of this one.
+     *
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11AssocResponse(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the Capabilities Information field.
+     *
+     * \return A constant reference to the stored Capabilities 
+     * Information field.
+     */
+    const capability_information& capabilities() const { return _body.capability;}
+
+    /**
+     * \brief Getter for the Capabilities Information field.
+     *
+     * \return A reference to the stored Capabilities 
+     * Information field.
+     */
+    capability_information& capabilities() { return _body.capability;}
+
+    /**
+     * \brief Getter for the status code field.
+     *
+     * \return The stored status code.
+     */
+    uint16_t status_code() const { return Endian::le_to_host(_body.status_code); }
+
+    /**
+     * \brief Getter for the AID field.
+     *
+     * \return The stored AID field.
+     */
+    uint16_t aid() const { return Endian::le_to_host(_body.aid); }
+
+    /**
+     * \brief Setter for the status code.
+     *
+     * \param new_status_code The status code to be set.
+     */
+    void status_code(uint16_t new_status_code);
+
+    /**
+     * \brief Setter for the AID field.
+     *
+     * \param new_aid The AID value to be set.
+     */
+    void aid(uint16_t new_aid);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11AssocResponse *clone() const {
+        return new Dot11AssocResponse(*this);
+    }
+private:
+    struct AssocRespBody {
+        capability_information capability;
+        uint16_t status_code;
+        uint16_t aid;
+    };
+
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+    AssocRespBody _body;
+};
+
+/**
+ * \brief Class representing an ReAssociation Request frame in the IEEE 802.11 Protocol.
+ *
+ */
+class Dot11ReAssocRequest : public Dot11ManagementFrame {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_REASSOC_REQ;
+
+    /**
+     * \brief Constructor for creating a 802.11 ReAssociation Request.
+     *
+     * Constructors a 802.11 Association Request taking the destination 
+     * and source hardware address.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11ReAssocRequest(const address_type &dst_hw_addr = address_type(), 
+                        const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11AssocRequest object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as 
+     * children of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     *
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11ReAssocRequest(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the Capabilities Information.
+     *
+     * \return A constant reference to the stored Capabilities 
+     * Information field.
+     */
+    const capability_information& capabilities() const { return _body.capability;}
+
+    /**
+     * \brief Getter for the Capabilities Information.
+     *
+     * \return A reference to the stored Capabilities Information 
+     * field.
+     */
+    capability_information& capabilities() { return _body.capability;}
+
+    /**
+     * \brief Getter for the listen interval field.
+     *
+     * \return The stored listen interval.
+     */
+    uint16_t listen_interval() const { return Endian::le_to_host(_body.listen_interval); }
+
+    /**
+     * \brief Getter for the current ap field.
+     *
+     * \return The current ap.
+     */
+    address_type current_ap() const { return _body.current_ap; }
+
+    /**
+     * \brief Setter for the listen interval field.
+     *
+     * \param new_listen_interval The listen interval to be set.
+     */
+    void listen_interval(uint16_t new_listen_interval);
+
+    /**
+     * \brief Setter for the current ap.
+     *
+     * \param new_current_ap The address of the current ap.
+     */
+    void current_ap(const address_type &new_current_ap);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11ReAssocRequest *clone() const {
+        return new Dot11ReAssocRequest(*this);
+    }
+private:
+    struct ReAssocReqBody {
+        capability_information capability;
+        uint16_t listen_interval;
+        uint8_t current_ap[address_type::address_size];
+    };
+
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+    ReAssocReqBody _body;
+};
+
+/**
+ * \brief IEEE 802.11 ReAssociation Response frame.
+ *
+ */
+class Dot11ReAssocResponse : public Dot11ManagementFrame {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_REASSOC_RESP;
+
+    /**
+     * \brief Constructor for creating a 802.11 Association Response.
+     *
+     * Constructs a 802.11 ReAssociation Response taking the 
+     * destination and source hardware address.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11ReAssocResponse(const address_type &dst_hw_addr = address_type(), 
+                        const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11ReAssocResponse object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     *
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11ReAssocResponse(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the Capabilities Information.
+     *
+     * \return A constant reference to the stored Capabilities 
+     * Information field.
+     */
+    const capability_information& capabilities() const { return _body.capability;}
+
+    /**
+     * \brief Getter for the Capabilities Information.
+     *
+     * \return A reference to the stored Capabilities Information 
+     * field.
+     */
+    capability_information& capabilities() { return _body.capability;}
+
+    /**
+     * \brief Getter for the status code field.
+     *
+     * \return The stored status code.
+     */
+    uint16_t status_code() const { return Endian::le_to_host(_body.status_code); }
+
+    /**
+     * \brief Getter for the AID field.
+     *
+     * \return The stored AID field value.
+     */
+    uint16_t aid() const { return Endian::le_to_host(_body.aid); }
+
+    /**
+     * \brief Setter for the status code field.
+     *
+     * \param new_status_code The status code to be set.
+     */
+    void status_code(uint16_t new_status_code);
+
+    /**
+     * \brief Setter for the AID field.
+     *
+     * \param new_aid The AID to be set.
+     */
+    void aid(uint16_t new_aid);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11ReAssocResponse *clone() const {
+        return new Dot11ReAssocResponse(*this);
+    }
+private:
+    struct ReAssocRespBody {
+        capability_information capability;
+        uint16_t status_code;
+        uint16_t aid;
+    };
+
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+    ReAssocRespBody _body;
+};
+} // namespace Tins
+
+#endif // TINS_DOT11_DOT11_ASSOC_H

include/tins/dot11/dot11_auth.h

@@ -0,0 +1,260 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_AUTH_H) && defined(HAVE_DOT11)
+#define TINS_DOT11_DOT11_AUTH_H
+
+#include "../dot11/dot11_mgmt.h"
+
+namespace Tins {
+/**
+ * \brief IEEE 802.11 Authentication Request frame.
+ */
+class Dot11Authentication : public Dot11ManagementFrame {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_AUTH;
+
+    /**
+     * \brief Constructor for creating a 802.11 Authentication.
+     *
+     * Constructs a 802.11 Dot11Authentication taking the 
+     * destination and source hardware address.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11Authentication(const address_type &dst_hw_addr = address_type(), 
+                        const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11Authentication object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     *
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11Authentication(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the Authetication Algorithm Number field.
+     *
+     * \return The stored authentication algorithm number.
+     */
+    uint16_t auth_algorithm() const {return Endian::le_to_host(_body.auth_algorithm); }
+
+    /**
+     * \brief Getter for the Authetication Sequence Number field.
+     *
+     * \return The stored authentication sequence number.
+     */
+    uint16_t auth_seq_number() const {return Endian::le_to_host(_body.auth_seq_number); }
+
+    /**
+     * \brief Getter for the status code field.
+     *
+     * \return The stored status code.
+     */
+    uint16_t status_code() const { return Endian::le_to_host(_body.status_code); }
+
+    /**
+     * \brief Setter for the Authetication Algorithm Number field.
+     *
+     * \param new_auth_algorithm The Authetication Algorithm Number 
+     * to be set.
+     */
+    void auth_algorithm(uint16_t new_auth_algorithm);
+
+    /**
+     * \brief Setter for the Authetication Sequence Number field.
+     *
+     * \param new_auth_seq_number The Authetication Sequence Number 
+     * to be set.
+     */
+    void auth_seq_number(uint16_t new_auth_seq_number);
+
+    /**
+     * \brief Setter for the status code field.
+     *
+     * \param new_status_code The status code to be set.
+     */
+    void status_code(uint16_t new_status_code);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11Authentication *clone() const {
+        return new Dot11Authentication(*this);
+    }
+private:
+    struct AuthBody {
+        uint16_t auth_algorithm;
+        uint16_t auth_seq_number;
+        uint16_t status_code;
+    };
+
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+    AuthBody _body;
+
+};
+
+/**
+ * \brief IEEE 802.11 Deauthentication frame.
+ *
+ */
+class Dot11Deauthentication : public Dot11ManagementFrame {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_DEAUTH;
+
+    /**
+     * \brief Constructor for creating a 802.11 Deauthentication.
+     *
+     * Constructs a 802.11 Deauthentication taking the 
+     * destination and source hardware address.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11Deauthentication(const address_type &dst_hw_addr = address_type(), 
+                        const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11Deauthentication object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     *
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11Deauthentication(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the reason code field.
+     *
+     * \return The reason code to be set.
+     */
+    uint16_t reason_code() const { return Endian::le_to_host(_body.reason_code); }
+
+    /**
+     * \brief Setter for the reason code field.
+     *
+     * \param new_reason_code The reason code to be set.
+     */
+    void reason_code(uint16_t new_reason_code);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11Deauthentication *clone() const {
+        return new Dot11Deauthentication(*this);
+    }
+private:
+    struct DeauthBody {
+        uint16_t reason_code;
+    };
+
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+    DeauthBody _body;
+};
+} // namespace Tins
+
+
+#endif // TINS_DOT11_DOT11_AUTH_H

include/tins/dot11/dot11_base.h

@@ -0,0 +1,522 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */ 
+
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_H) && defined(HAVE_DOT11)
+#define TINS_DOT11_DOT11_H
+
+#include <list>
+#include "../pdu.h"
+#include "../pdu_option.h"
+#include "../small_uint.h"
+#include "../hw_address.h"
+#include "../endianness.h"
+#include "../cxxstd.h"
+#include "../macros.h"
+
+namespace Tins {
+class RSNInformation;
+
+/**
+ * \brief Class representing an 802.11 frame.
+ */
+class Dot11 : public PDU {
+public:
+    /**
+     * The type used to store hardware addresses.
+     */
+    typedef HWAddress<6> address_type;
+
+    /**
+     * \brief IEEE 802.11 options struct.
+     */
+    typedef PDUOption<uint8_t, Dot11> option;
+
+    /**
+     * The type used to store tagged options.
+     */
+    typedef std::list<option> options_type;
+
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11;
+
+    /**
+     * \brief Broadcast hardware address.
+     */
+    static const address_type BROADCAST;
+
+    /**
+     * The endianness used by Dot11.
+     */
+    static const endian_type endianness = LE;
+
+    /**
+     * \brief Enum for the different types of 802.11 frames.
+     *
+     */
+    enum Types {
+        MANAGEMENT = 0,
+        CONTROL = 1,
+        DATA = 2
+    };
+
+    /**
+     * \brief Enum for the different types of tagged options.
+     */
+    enum OptionTypes {
+        SSID,
+        SUPPORTED_RATES,
+        FH_SET,
+        DS_SET,
+        CF_SET,
+        TIM,
+        IBSS_SET,
+        COUNTRY,
+        HOPPING_PATTERN_PARAMS,
+        HOPPING_PATTERN_TABLE,
+        REQUEST_INFORMATION,
+        BSS_LOAD,
+        EDCA,
+        TSPEC,
+        TCLAS,
+        SCHEDULE,
+        CHALLENGE_TEXT,
+        POWER_CONSTRAINT = 32,
+        POWER_CAPABILITY,
+        TPC_REQUEST,
+        TPC_REPORT,
+        SUPPORTED_CHANNELS,
+        CHANNEL_SWITCH,
+        MEASUREMENT_REQUEST,
+        MEASUREMENT_REPORT,
+        QUIET,
+        IBSS_DFS,
+        ERP_INFORMATION,
+        TS_DELAY,
+        TCLAS_PROCESSING,
+        QOS_CAPABILITY = 46,
+        RSN = 48,
+        EXT_SUPPORTED_RATES = 50,
+        VENDOR_SPECIFIC = 221
+    };
+
+    /**
+     * \brief Enum for the different subtypes of 802.11 management frames.
+     *
+     */
+    enum ManagementSubtypes {
+        ASSOC_REQ = 0,
+        ASSOC_RESP = 1,
+        REASSOC_REQ = 2,
+        REASSOC_RESP = 3,
+        PROBE_REQ = 4,
+        PROBE_RESP = 5,
+        BEACON = 8,
+        ATIM = 9,
+        DISASSOC = 10,
+        AUTH = 11,
+        DEAUTH = 12
+    };
+
+    /**
+     * \brief Enum for the different subtypes of 802.11 control frames.
+     *
+     */
+    enum ControlSubtypes {
+        BLOCK_ACK_REQ = 8,
+        BLOCK_ACK = 9,
+        PS = 10,
+        RTS = 11,
+        CTS = 12,
+        ACK = 13,
+        CF_END = 14,
+        CF_END_ACK = 15
+    };
+
+    /**
+     * \brief Enum fro the different subtypes of 802.11 data frames.
+     *
+     */
+    enum DataSubtypes {
+        DATA_DATA = 0,
+        DATA_CF_ACK = 1,
+        DATA_CF_POLL = 2,
+        DATA_CF_ACK_POLL = 3,
+        DATA_NULL = 4,
+        CF_ACK = 5,
+        CF_POLL = 6,
+        CF_ACK_POLL = 7,
+        QOS_DATA_DATA = 8,
+        QOS_DATA_CF_ACK = 9,
+        QOS_DATA_CF_POLL = 10,
+        QOS_DATA_CF_ACK_POLL = 11,
+        QOS_DATA_NULL = 12
+    };
+    
+    /**
+     * \brief Constructs an 802.11 PDU.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     */
+    Dot11(const address_type &dst_hw_addr = address_type());
+
+    /**
+     * \brief Constructs 802.11 PDU from a buffer and adds all 
+     * identifiable PDUs found in the buffer as children of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for a 802.11 header in the 
+     * buffer, a malformed_packet exception is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the protocol version field.
+     *
+     * \return The stored protocol version field.
+     */
+    small_uint<2> protocol() const { return _header.control.protocol; }
+
+    /**
+     * \brief Getter for the Type field.
+     *
+     * \return The stored Type field.
+     */
+    small_uint<2> type() const { return _header.control.type; }
+
+    /**
+     * \brief Getter for the Subtype field.
+     *
+     * \return The stored Subtype field.
+     */
+    small_uint<4> subtype() const { return _header.control.subtype; }
+
+    /**
+     * \brief Getter for the To-DS field.
+     *
+     * \return The stored To-DS field.
+     */
+    small_uint<1> to_ds() const { return _header.control.to_ds; }
+
+    /**
+     * \brief Getter for the From-DS field.
+     *
+     * \return The stored From-DS field.
+     */
+    small_uint<1> from_ds() const { return _header.control.from_ds; }
+
+    /**
+     * \brief Getter for the More-Frag field.
+     *
+     * \return The stored More-Frag field.
+     */
+    small_uint<1> more_frag() const { return _header.control.more_frag; }
+
+    /**
+     * \brief Getter for the Retry field.
+     *
+     * \return The stored Retry field.
+     */
+    small_uint<1> retry() const { return _header.control.retry; }
+
+    /**
+     * \brief Getter for the Power-Management field.
+     *
+     * \return The stored Power-Management field.
+     */
+    small_uint<1> power_mgmt() const { return _header.control.power_mgmt; }
+
+    /**
+     * \brief Getter for the WEP field.
+     *
+     * \return The stored WEP field.
+     */
+    small_uint<1> wep() const { return _header.control.wep; }
+
+    /**
+     * \brief Getter for the Order field.
+     *
+     * \return The stored Order field.
+     */
+    small_uint<1> order() const { return _header.control.order; }
+
+    /**
+     * \brief Getter for the Duration-ID field.
+     *
+     * \return The stored Duration-ID field.
+     */
+    uint16_t duration_id() const { return Endian::le_to_host(_header.duration_id); }
+
+    /**
+     * \brief Getter for the first address.
+     *
+     * \return The stored first address.
+     */
+    address_type addr1() const { return _header.addr1; }
+
+    // Setters
+
+    /**
+     * \brief Setter for the protocol version field.
+     *
+     * \param new_proto The new protocol version field value.
+     */
+    void protocol(small_uint<2> new_proto);
+
+    /**
+     * \brief Setter for the type field.
+     *
+     * \param new_type The new type field value.
+     */
+    void type(small_uint<2> new_type);
+
+    /**
+     * \brief Setter for the subtype field.
+     *
+     * \param new_subtype The new subtype field value.
+     */
+    void subtype(small_uint<4> new_subtype);
+
+    /**
+     * \brief Setter for the To-DS field.
+     *
+     * \param new_value The new To-DS field value.
+     */
+    void to_ds(small_uint<1> new_value);
+
+    /**
+     * \brief Setter for the From-DS field.
+     *
+     * \param new_value The new From-DS field value.
+     */
+    void from_ds(small_uint<1> new_value);
+
+    /**
+     * \brief Setter for the More-Frag field.
+     *
+     * \param new_value The new More-Frag field value.
+     */
+    void more_frag(small_uint<1> new_value);
+
+    /**
+     * \brief Setter for the Retry field.
+     *
+     * \param new_value The new Retry field value.
+     */
+    void retry(small_uint<1> new_value);
+
+    /**
+     * \brief Setter for the Power-Management field.
+     *
+     * \param new_value The new Power-Management field value.
+     */
+    void power_mgmt(small_uint<1> new_value);
+
+    /**
+     * \brief Setter for the WEP field.
+     *
+     * \param new_value The new WEP field value.
+     */
+    void wep(small_uint<1> new_value);
+
+    /**
+     * \brief Setter for the Order field.
+     *
+     * \param new_value The new Order field value.
+     */
+    void order(small_uint<1> new_value);
+
+    /**
+     * \brief Setter for the Duration-ID field.
+     *
+     * \param new_duration_id The new Duration-ID field value.
+     */
+    void duration_id(uint16_t new_duration_id);
+
+    /**
+     * \brief Setter for the first address.
+     *
+     * \param new_addr1 The new first address.
+     */
+    void addr1(const address_type &new_addr1);
+
+    /* Virtual methods */
+    /**
+     * \brief Returns the 802.11 frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+    
+    #ifndef WIN32
+    /**
+     * \sa PDU::send()
+     */
+    void send(PacketSender &sender, const NetworkInterface &iface);
+    #endif // WIN32
+    
+    /**
+     * \brief Adds a new option to this Dot11 PDU.
+     * \param opt The option to be added.
+     */
+    void add_option(const option &opt);
+    
+    #if TINS_IS_CXX11
+        /**
+         * \brief Adds a new option to this Dot11 PDU.
+         * 
+         * The option is move-constructed
+         * 
+         * \param opt The option to be added.
+         */
+        void add_option(option &&opt) {
+            internal_add_option(opt);
+            _options.push_back(std::move(opt));
+        }
+    #endif
+
+    /**
+     * \brief Looks up a tagged option in the option list.
+     * 
+     * The returned pointer <b>must not</b> be free'd.
+     * 
+     * \param opt The option identifier.
+     * \return The option found, or 0 if no such option has been set.
+     */
+    const option *search_option(OptionTypes opt) const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+    
+    /**
+     * \sa PDU::clone
+     */
+    Dot11 *clone() const {
+        return new Dot11(*this);
+    }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag;
+    }
+    
+    /**
+     * \brief Getter for the option list.
+     * 
+     * \return The options list.
+     */
+    const options_type &options() const { return _options; }
+
+    /**
+     * \brief Allocates an Dot11 PDU from a buffer.
+     * 
+     * This can be used somehow as a "virtual constructor". This 
+     * method instantiates the appropriate subclass of Dot11 from the 
+     * given buffer.
+     * 
+     * The allocated class' type will be figured out from the
+     * information provided in the buffer.
+     * 
+     * \param buffer The buffer from which to take the PDU data.
+     * \param total_sz The total size of the buffer.
+     * \return The allocated Dot11 PDU.
+     */
+    static Dot11 *from_bytes(const uint8_t *buffer, uint32_t total_sz);
+protected:
+    virtual uint32_t write_ext_header(uint8_t *buffer, uint32_t total_sz) { return 0; }
+    virtual uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz) { return 0; }
+    void parse_tagged_parameters(const uint8_t *buffer, uint32_t total_sz);
+    void add_tagged_option(OptionTypes opt, uint8_t len, const uint8_t *val);
+protected:
+    /**
+     * Struct that represents the 802.11 header
+     */
+    TINS_BEGIN_PACK
+    struct ieee80211_header {
+        TINS_BEGIN_PACK
+        struct {
+        #if TINS_IS_LITTLE_ENDIAN
+            uint16_t protocol:2,
+                    type:2,
+                    subtype:4,
+                    to_ds:1,
+                    from_ds:1,
+                    more_frag:1,
+                    retry:1,
+                    power_mgmt:1,
+                    more_data:1,
+                    wep:1,
+                    order:1;
+        #elif TINS_IS_BIG_ENDIAN
+            uint16_t subtype:4,
+                    type:2,
+                    protocol:2,
+                    order:1,
+                    wep:1,
+                    more_data:1,
+                    power_mgmt:1,
+                    retry:1,
+                    more_frag:1,
+                    from_ds:1,
+                    to_ds:1;
+        #endif
+        } TINS_END_PACK control;
+        uint16_t duration_id;
+        uint8_t addr1[address_type::address_size];
+
+    } TINS_END_PACK;
+private:
+    Dot11(const ieee80211_header *header_ptr);
+    
+    void internal_add_option(const option &opt);
+    void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
+
+
+    ieee80211_header _header;
+    uint32_t _options_size;
+    options_type _options;
+};
+}
+
+#endif // TINS_DOT11_DOT11_H

include/tins/dot11/dot11_beacon.h

@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */    
+
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_BEACON_H) && defined(HAVE_DOT11)
+#define TINS_DOT11_DOT11_BEACON_H
+
+#include "../dot11/dot11_mgmt.h"
+
+namespace Tins {
+    /**
+     * \brief Class representing an 802.11 Beacon.
+     *
+     */
+    class Dot11Beacon : public Dot11ManagementFrame {
+    public:
+        /**
+         * \brief This PDU's flag.
+         */
+        static const PDU::PDUType pdu_flag = PDU::DOT11_BEACON;
+
+        /**
+         * \brief Constructor for creating a 802.11 Beacon.
+         *
+         * Constructs a 802.11 Beacon taking destination and source 
+         * hardware address.
+         *
+         * \param dst_hw_addr The destination hardware address.
+         * \param src_hw_addr The source hardware address.
+         */
+        Dot11Beacon(const address_type &dst_hw_addr = address_type(), 
+                    const address_type &src_hw_addr = address_type());
+
+        /**
+         * \brief Constructs a Dot11Beacon object from a buffer and adds
+         * all identifiable PDUs found in the buffer as children of this 
+         * one.
+         *
+         * If the next PDU is not recognized, then a RawPDU is used.
+         * 
+         * If there is not enough size for the header in the buffer
+         * or the input data is malformed, a malformed_packet exception 
+         * is thrown.
+         * 
+         * \param buffer The buffer from which this PDU will be constructed.
+         * \param total_sz The total size of the buffer.
+         */
+        Dot11Beacon(const uint8_t *buffer, uint32_t total_sz);
+
+        /**
+         * \brief Getter for the timestamp field.
+         *
+         * \return The stored timestamp value.
+         */
+        uint64_t timestamp() const { return Endian::le_to_host(_body.timestamp); }
+
+        /**
+         * \brief Getter for the interval field.
+         *
+         * \return The stored interval value.
+         */
+        uint16_t interval() const { return Endian::le_to_host(_body.interval); }
+
+        /**
+         * \brief Getter for the Capabilities Information structure.
+         *
+         * \return A constant refereence to the stored Capabilities 
+         * Information field.
+         */
+        const capability_information& capabilities() const { return _body.capability; }
+
+        /**
+         * \brief Getter for the Capabilities Information.
+         *
+         * \return A refereence to the stored Capabilities Information 
+         * field.
+         */
+        capability_information& capabilities() { return _body.capability; }
+
+        /**
+         * \brief Setter for the timestamp field.
+         *
+         * \param new_timestamp The timestamp to be set.
+         */
+        void timestamp(uint64_t new_timestamp);
+
+        /**
+         * \brief Setter for the interval field.
+         *
+         * \param new_interval The interval to be set.
+         */
+        void interval(uint16_t new_interval);
+
+        /**
+         * \brief Returns the frame's header length.
+         *
+         * \return An uint32_t with the header's size.
+         * \sa PDU::header_size()
+         */
+        uint32_t header_size() const;
+
+        /**
+         * \brief Check wether this PDU matches the specified flag.
+         * \param flag The flag to match
+         * \sa PDU::matches_flag
+         */
+        bool matches_flag(PDUType flag) const {
+           return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+        }
+
+        /**
+         * \brief Clones this PDU.
+         *
+         * \sa PDU::clone
+         */
+        Dot11Beacon *clone() const {
+            return new Dot11Beacon(*this);
+        }
+
+        /**
+         * \brief Getter for the PDU's type.
+         * \sa PDU::pdu_type
+         */
+        PDUType pdu_type() const { return pdu_flag; }
+    private:
+        TINS_BEGIN_PACK
+        struct BeaconBody {
+            uint64_t timestamp;
+            uint16_t interval;
+            capability_information capability;
+        } TINS_END_PACK;
+
+        uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+        BeaconBody _body;
+    };
+} // namespace Tins
+
+#endif // TINS_DOT11_DOT11_BEACON_H

include/tins/dot11/dot11_control.h

@@ -0,0 +1,746 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_CONTROL_H) && defined(HAVE_DOT11)
+
+#define TINS_DOT11_DOT11_CONTROL_H
+
+#include "../dot11/dot11_base.h"
+
+namespace Tins {
+/**
+ * \brief Class that represents an 802.11 control frame.
+ */
+class Dot11Control : public Dot11 {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_CONTROL;
+    
+    /**
+     * \brief Constructor for creating a 802.11 control frame PDU
+     *
+     * Constructs a 802.11 Control PDU taking the destination and 
+     * source hardware addresses.
+     *
+     * \param dst_addr The destination hardware address.
+     */
+    Dot11Control(const address_type &dst_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11Control object from a buffer and
+     * adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11Control(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return PDU::DOT11_CONTROL; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == PDU::DOT11_CONTROL || Dot11::matches_flag(flag);
+    }
+};
+
+/**
+ * \brief Class that represents an abstraction of the 802.11 control frames
+ * that contain a target address.
+ */
+class Dot11ControlTA : public Dot11Control {
+public:
+    /**
+     * \brief Getter for the target address field.
+     */
+    address_type target_addr() const { return _taddr; }
+
+    /**
+     * \brief Setter for the target address field.
+     * \param addr The new target address.
+     */
+    void target_addr(const address_type &addr);
+protected:
+    /**
+     * \brief Constructor for creating a 802.11 control frame TA PDU
+     *
+     * Constructs a 802.11 PDU taking the destination and source 
+     * hardware addresses.
+     *
+     * \param dst_addr The destination hardware address.
+     * \param target_addr The source hardware address.
+     */
+    Dot11ControlTA(const address_type &dst_addr = address_type(), 
+                const address_type &target_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11ControlTA object from a buffer and
+     * adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11ControlTA(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Returns the 802.11 frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+protected:
+    /**
+     * \brief Getter for the control ta additional fields size.
+     */
+    uint32_t controlta_size() const { return _taddr.size() + sizeof(ieee80211_header); }
+
+    uint32_t write_ext_header(uint8_t *buffer, uint32_t total_sz);
+private:
+
+    address_type _taddr;
+};
+
+/**
+ * \brief IEEE 802.11 RTS frame.
+ */
+class Dot11RTS : public Dot11ControlTA {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_RTS;
+
+    /**
+     * \brief Constructor for creating a 802.11 RTS frame PDU
+     *
+     * Constructs a 802.11 RTS PDU taking the destination and source
+     * hardware addresses.
+     *
+     * \param dst_addr The destination hardware address.
+     * \param target_addr The source hardware address.
+     */
+    Dot11RTS(const address_type &dst_addr = address_type(), 
+            const address_type &target_addr = address_type());
+                
+    /**
+     * \brief Constructs a Dot11RTS object from a buffer and adds all 
+     * identifiable PDUs found in the buffer as children of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11RTS(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11RTS *clone() const {
+        return new Dot11RTS(*this);
+    }
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11Control::matches_flag(flag);
+    }
+};
+
+class Dot11PSPoll : public Dot11ControlTA {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_PS_POLL;
+
+    /**
+     * \brief Constructor for creating a 802.11 PS-Poll frame PDU
+     *
+     * Constructs a 802.11 PDU taking the destination and source 
+     * hardware addresses.
+     *
+     * \param dst_addr The destination hardware address.
+     * \param target_addr The source hardware address.
+     */
+    Dot11PSPoll(const address_type &dst_addr = address_type(), 
+                const address_type &target_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11PSPoll object from a buffer and
+     * adds all identifiable PDUs found in the buffer as children of 
+     * this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11PSPoll(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11PSPoll *clone() const {
+        return new Dot11PSPoll(*this);
+    }
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11Control::matches_flag(flag);
+    }
+};
+
+class Dot11CFEnd : public Dot11ControlTA {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_CF_END;
+
+    /**
+     * \brief Constructor for creating a 802.11 CF-End frame PDU
+     *
+     * Constructs a 802.11 PDU taking the destination and source 
+     * hardware addresses.
+     *
+     * \param dst_addr The destination hardware address.
+     * \param target_addr The source hardware address.
+     */
+    Dot11CFEnd(const address_type &dst_addr = address_type(), 
+            const address_type &target_addr = address_type());
+                
+    /**
+     * \brief Constructs a Dot11CFEnd object from a buffer and adds 
+     * all identifiable PDUs found in the buffer as children of this 
+     * one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11CFEnd(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11CFEnd *clone() const {
+        return new Dot11CFEnd(*this);
+    }
+
+     /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11Control::matches_flag(flag);
+    }
+};
+
+class Dot11EndCFAck : public Dot11ControlTA {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_END_CF_ACK;
+
+    /**
+     * \brief Constructor for creating a 802.11 End-CF-Ack frame PDU
+     *
+     * Constructs a 802.11 PDU taking the destination and source 
+     * hardware addresses.
+     * 
+     * \param dst_addr The destination hardware address.
+     * \param target_addr The source hardware address.
+     */
+    Dot11EndCFAck(const address_type &dst_addr = address_type(), 
+                const address_type &target_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11EndCFAck frame object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11EndCFAck(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11EndCFAck *clone() const {
+        return new Dot11EndCFAck(*this);
+    }
+
+     /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11Control::matches_flag(flag);
+    }
+};
+
+class Dot11Ack : public Dot11Control {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_ACK;
+
+    /**
+     * \brief Constructor for creating a 802.11 Ack frame PDU
+     *
+     * Constructs a 802.11 PDU taking the destination and source 
+     * hardware addresses.
+     *
+     * \param dst_addr The destination hardware address.
+     */
+    Dot11Ack(const address_type &dst_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11Ack frame object from a buffer and
+     * adds all identifiable PDUs found in the buffer as children of 
+     * this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11Ack(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11Ack *clone() const {
+        return new Dot11Ack(*this);
+    }
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11Control::matches_flag(flag);
+    }
+};
+
+/**
+ * \brief Class that represents an 802.11 Block Ack Request PDU.
+ */
+class Dot11BlockAckRequest : public Dot11ControlTA {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_BLOCK_ACK_REQ;
+
+    /**
+     * \brief Constructor for creating a 802.11 Block Ack request frame PDU
+     *
+     * Constructs a 802.11 PDU taking the destination and source 
+     * hardware addresses.
+     * 
+     * \param dst_addr The destination hardware address.
+     * \param target_addr The source hardware address.
+     */
+    Dot11BlockAckRequest(const address_type &dst_addr = address_type(), 
+                        const address_type &target_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11BlockAckRequest object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11BlockAckRequest(const uint8_t *buffer, uint32_t total_sz);
+
+    /* Getter */
+
+    /**
+     * \brief Getter for the bar control field.
+     * \return The stored bar control field.
+     */
+    small_uint<4> bar_control() const { 
+        #if TINS_IS_LITTLE_ENDIAN
+        return _bar_control & 0xf; 
+        #else
+        return (_bar_control >> 8) & 0xf; 
+        #endif
+    }
+
+    /**
+     * \brief Getter for the start sequence field.
+     * \return The stored start sequence.
+     */
+    small_uint<12> start_sequence() const { 
+        #if TINS_IS_LITTLE_ENDIAN
+        return (_start_sequence >> 4) & 0xfff; 
+        #else
+        return (Endian::le_to_host<uint16_t>(_start_sequence) >> 4) & 0xfff; 
+        #endif
+    }
+    
+    /**
+     * \brief Getter for the fragment number field.
+     * \return The stored fragment number field.
+     */
+    small_uint<4> fragment_number() const { 
+        #if TINS_IS_LITTLE_ENDIAN
+        return _start_sequence & 0xf; 
+        #else
+        return (_start_sequence >> 8) & 0xf; 
+        #endif
+    }
+    
+    /**
+     * \brief Returns the 802.11 frame's header length.
+     *
+     * \return The header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /* Setter */
+
+    /**
+     * \brief Setter for the bar control field.
+     * \param bar The bar control field to be set.
+     */
+    void bar_control(small_uint<4> bar);
+
+    /**
+     * \brief Setter for the start sequence field.
+     * \param bar The start sequence field to be set.
+     */
+    void start_sequence(small_uint<12> seq);
+    
+    /**
+     * \brief Setter for the fragment number field.
+     * \param frag The fragment number field to be set.
+     */
+    void fragment_number(small_uint<4> frag);
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11BlockAckRequest *clone() const {
+        return new Dot11BlockAckRequest(*this);
+    }
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11Control::matches_flag(flag);
+    }
+protected:
+    uint32_t write_ext_header(uint8_t *buffer, uint32_t total_sz);
+private:
+    void init_block_ack();
+
+    uint16_t _bar_control;
+    uint16_t _start_sequence;
+};
+
+/**
+ * \brief Class that represents an 802.11 block ack frame.
+ */
+class Dot11BlockAck : public Dot11ControlTA {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_BLOCK_ACK;
+    
+    /**
+     * The size of the bitmap field.
+     */
+    static const size_t bitmap_size = 8;
+
+    /**
+     * \brief Constructor for creating a 802.11 Block Ack frame PDU
+     *
+     * Constructs a 802.11 PDU taking the destination and source 
+     * hardware addresses.
+     * 
+     * \param dst_addr The destination hardware address.
+     * \param target_addr The source hardware address.
+     */
+    Dot11BlockAck(const address_type &dst_addr = address_type(), 
+                const address_type &target_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11BlockAck frame object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11BlockAck(const uint8_t *buffer, uint32_t total_sz);
+
+    /* Getters */
+
+    /**
+     * \brief Getter for the bar control field.
+     * \return The stored bar control field.
+     */
+    small_uint<4> bar_control() const { 
+        #if TINS_IS_LITTLE_ENDIAN
+        return _bar_control & 0xf; 
+        #else
+        return (_bar_control >> 8) & 0xf; 
+        #endif
+    }
+
+    /**
+     * \brief Getter for the start sequence field.
+     * \return The stored start sequence.
+     */
+    small_uint<12> start_sequence() const { 
+        #if TINS_IS_LITTLE_ENDIAN
+        return (_start_sequence >> 4) & 0xfff; 
+        #else
+        return (Endian::le_to_host<uint16_t>(_start_sequence) >> 4) & 0xfff; 
+        #endif
+    }
+    
+    /**
+     * \brief Getter for the fragment number field.
+     * \return The stored fragment number field.
+     */
+    small_uint<4> fragment_number() const { 
+        #if TINS_IS_LITTLE_ENDIAN
+        return _start_sequence & 0xf; 
+        #else
+        return (_start_sequence >> 8) & 0xf; 
+        #endif
+    }
+    
+    /**
+     * \brief Returns the 802.11 frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /* Setters */
+
+    /**
+     * \brief Setter for the bar control field.
+     * \param bar The bar control field to be set.
+     */
+    void bar_control(small_uint<4> bar);
+
+    /**
+     * \brief Setter for the start sequence field.
+     * \param bar The start sequence field to be set.
+     */
+    void start_sequence(small_uint<12> seq);
+    
+    /**
+     * \brief Setter for the fragment number field.
+     * \param frag The fragment number field to be set.
+     */
+    void fragment_number(small_uint<4> frag);
+
+    /**
+     * \brief Getter for the bitmap field.
+     * 
+     * The returned pointer <b>must not</b> be free'd.
+     * 
+     * \return The bitmap field.
+     */
+    const uint8_t *bitmap() const { return _bitmap; }
+
+    /**
+     * \brief Setter for the bitmap field.
+     * \param bit The new bitmap field to be set.
+     */
+    void bitmap(const uint8_t *bit);
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11Control::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11BlockAck *clone() const {
+        return new Dot11BlockAck(*this);
+    }
+private:
+    void init_block_ack();
+    uint32_t write_ext_header(uint8_t *buffer, uint32_t total_sz);
+
+    uint16_t _bar_control, _start_sequence;
+    uint8_t _bitmap[bitmap_size];
+};
+} // namespace Tins
+#endif // TINS_DOT11_DOT11_CONTROL_H

include/tins/dot11/dot11_data.h

@@ -0,0 +1,345 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_DATA_H) && defined(HAVE_DOT11)
+#define TINS_DOT11_DOT11_DATA_H
+
+#include "../dot11/dot11_base.h"
+
+namespace Tins {
+class Dot11Data : public Dot11 {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_DATA;
+    
+    /**
+     * \brief Constructor for creating a 802.11 Data frame.
+     *
+     * Constructs a 802.11 Data frame taking the
+     * destination and source hardware addresses.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11Data(const address_type &dst_hw_addr = address_type(), 
+            const address_type &src_hw_addr = address_type());
+                
+    /**
+     * \brief Constructs a Dot11Data object from a buffer and adds 
+     * all identifiable PDUs found in the buffer as children of 
+     * this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11Data(const uint8_t *buffer, uint32_t total_sz);
+    
+    /**
+     * \brief Getter for the second address.
+     *
+     * \return The stored second address.
+     */
+    address_type addr2() const { return _ext_header.addr2; }
+
+    /**
+     * \brief Getter for the third address.
+     *
+     * \return The stored third address.
+     */
+    address_type addr3() const { return _ext_header.addr3; }
+
+    /**
+     * \brief Getter for the fragment number field.
+     *
+     * \return The stored fragment number.
+     */
+    small_uint<4> frag_num() const { 
+        #if TINS_IS_LITTLE_ENDIAN
+        return _ext_header.frag_seq & 0xf; 
+        #else
+        return (_ext_header.frag_seq >> 8) & 0xf; 
+        #endif
+    }
+
+    /**
+     * \brief Getter for the sequence number field.
+     *
+     * \return The stored sequence number.
+     */
+    small_uint<12> seq_num() const { 
+        #if TINS_IS_LITTLE_ENDIAN
+        return (_ext_header.frag_seq >> 4) & 0xfff; 
+        #else
+        return (Endian::le_to_host<uint16_t>(_ext_header.frag_seq) >> 4) & 0xfff; 
+        #endif
+    }
+
+    /**
+     * \brief Getter for the fourth address.
+     *
+     * \return The fourth address.
+     */
+    address_type addr4() const { return _addr4; }
+
+    /**
+     * \brief Setter for the second address.
+     *
+     * \param new_addr2 The second address to be set.
+     */
+    void addr2(const address_type &new_addr2);
+
+    /**
+     * \brief Setter for the third address.
+     *
+     * \param new_addr3 The third address to be set.
+     */
+    void addr3(const address_type &new_addr3);
+
+    /**
+     * \brief Setter for the fragment number field.
+     *
+     * \param new_frag_num The fragment number to be set.
+     */
+    void frag_num(small_uint<4> new_frag_num);
+
+    /**
+     * \brief Setter for the sequence number field.
+     *
+     * \param new_seq_num The sequence number to be set.
+     */
+    void seq_num(small_uint<12> new_seq_num);
+
+    /**
+     * \brief Setter for the fourth address field.
+     *
+     * \param new_addr4 The fourth address to be set.
+     */
+    void addr4(const address_type &new_addr4);
+
+    /**
+     * \brief Retrieves the frame's source address.
+     *
+     * This is a wrapper over the addr* member functions which
+     * takes into account the value of the FromDS and ToDS bits.
+     *
+     * If FromDS == ToDS == 1, the return value is not defined.
+     */
+    address_type src_addr() const {
+        if(!from_ds() && !to_ds())
+            return addr2();
+        if(!from_ds() && to_ds())
+            return addr2();
+        return addr3();
+    }
+
+    /**
+     * \brief Retrieves the frame's destination address.
+     *
+     * This is a wrapper over the addr* member functions which
+     * takes into account the value of the FromDS and ToDS bits.
+     *
+     * If FromDS == ToDS == 1, the return value is not defined.
+     */
+    address_type dst_addr() const {
+        if(!from_ds() && !to_ds())
+            return addr1();
+        if(!from_ds() && to_ds())
+            return addr3();
+        return addr1();
+    }
+
+    /**
+     * \brief Retrieves the frame's BSSID address.
+     *
+     * This is a wrapper over the addr* member functions which
+     * takes into account the value of the FromDS and ToDS bits.
+     *
+     * If FromDS == ToDS == 1, the return value is not defined.
+     */
+    address_type bssid_addr() const {
+        if(!from_ds() && !to_ds())
+            return addr3();
+        if(!from_ds() && to_ds())
+            return addr1();
+        return addr2();
+    }
+
+    /**
+     * \brief Returns the 802.11 frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11Data *clone() const {
+        return new Dot11Data(*this);
+    }
+protected:
+    TINS_BEGIN_PACK
+    struct ExtendedHeader {
+        uint8_t addr2[address_type::address_size];
+        uint8_t addr3[address_type::address_size];
+        uint16_t frag_seq;
+    } TINS_END_PACK;
+    
+    struct no_inner_pdu { };
+    Dot11Data(const uint8_t *buffer, uint32_t total_sz, no_inner_pdu);
+
+    uint32_t init(const uint8_t *buffer, uint32_t total_sz);
+    uint32_t write_ext_header(uint8_t *buffer, uint32_t total_sz);
+
+    uint32_t data_frame_size() { 
+        return Dot11::header_size() + sizeof(_ext_header) + 
+            ((from_ds() && to_ds()) ? _addr4.size() : 0); 
+    }
+private:
+    ExtendedHeader _ext_header;
+    address_type _addr4;
+};
+
+class Dot11QoSData : public Dot11Data {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_QOS_DATA;
+
+    /**
+     * \brief Constructor for creating a 802.11 QoS Data PDU
+     *
+     * Constructs a 802.11 QoS Data PDU taking the
+     * destination and source hardware addresses.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11QoSData(const address_type &dst_hw_addr = address_type(), 
+                const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructors Dot11QoSData object from a buffer and adds
+     * all identifiable PDUs found in the buffer as children of this 
+     * one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11QoSData(const uint8_t *buffer, uint32_t total_sz);
+    
+    /**
+     * \brief Getter for the QOS Control field.
+     *
+     * \return The stored QOS Control field value.
+     */
+    uint16_t qos_control() const { return Endian::le_to_host(_qos_control); }
+
+    /**
+     * \brief Setter for the QOS Control field.
+     *
+     * \param new_qos_control The QOS Control to be set.
+     */
+    void qos_control(uint16_t new_qos_control);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone
+     */
+    Dot11QoSData *clone() const {
+        return new Dot11QoSData(*this);
+    }
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return PDU::DOT11_QOS_DATA; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == PDU::DOT11_QOS_DATA || Dot11Data::matches_flag(flag);
+    }
+private:
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+
+
+    uint16_t _qos_control;
+};
+}
+
+#endif // TINS_DOT11_DOT11_DATA_H

include/tins/dot11/dot11_probe.h

@@ -0,0 +1,233 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_PROBE_H) && defined(HAVE_DOT11)
+
+#define TINS_DOT11_DOT11_PROBE_H
+
+#include "../dot11/dot11_mgmt.h"
+
+namespace Tins {
+/**
+ * \brief Class representing an Probe Request frame in the IEEE 802.11 Protocol.
+ *
+ */
+class Dot11ProbeRequest : public Dot11ManagementFrame {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_PROBE_REQ;
+
+    /**
+     * \brief Constructor for creating a 802.11 Probe Request.
+     *
+     * Constructs a 802.11 Probe Request taking the 
+     * destination and source hardware address.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11ProbeRequest(const address_type &dst_hw_addr = address_type(), 
+                    const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11ProbeRequest object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     *
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11ProbeRequest(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return PDU::DOT11_PROBE_REQ; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone()
+     */
+    Dot11ProbeRequest* clone() const {
+        return new Dot11ProbeRequest(*this);
+    }
+
+};
+
+/**
+ * \brief Class representing an Probe Response frame in the IEEE 802.11 Protocol.
+ *
+ */
+class Dot11ProbeResponse : public Dot11ManagementFrame {
+public:
+    /**
+     * \brief This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT11_PROBE_RESP;
+
+    /**
+     * \brief Constructor for creating a 802.11 Probe Response.
+     *
+     * Constructs a 802.11 Probe Response taking the
+     * destination and source hardware addresses.
+     *
+     * \param dst_hw_addr The destination hardware address.
+     * \param src_hw_addr The source hardware address.
+     */
+    Dot11ProbeResponse(const address_type &dst_hw_addr = address_type(), 
+                    const address_type &src_hw_addr = address_type());
+
+    /**
+     * \brief Constructs a Dot11ProbeResponse object from a buffer 
+     * and adds all identifiable PDUs found in the buffer as children 
+     * of this one.
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for the header in the buffer
+     * or the input data is malformed, a malformed_packet exception 
+     * is thrown.
+     *
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot11ProbeResponse(const uint8_t *buffer, uint32_t total_sz);
+
+    /**
+     * \brief Getter for the timestamp field.
+     *
+     * \return The stored timestamp value.
+     */
+    uint64_t timestamp() const { return Endian::le_to_host(_body.timestamp); }
+
+    /**
+     * \brief Getter for the interval field.
+     *
+     * \return The stored interval value.
+     */
+    uint16_t interval() const { return Endian::le_to_host(_body.interval); }
+
+    /**
+     * \brief Getter for the Capabilities Information.
+     *
+     * \return A constant reference to the stored Capabilities 
+     * Information field.
+     */
+    const capability_information& capabilities() const { return _body.capability;}
+
+    /**
+     * \brief Getter for the Capabilities Information.
+     *
+     * \return A reference to the stored Capabilities Information 
+     * field.
+     */
+    capability_information& capabilities() { return _body.capability;}
+
+    /**
+     * \brief Setter for the timestamp field.
+     *
+     * \param new_timestamp The timestamp to be set.
+     */
+    void timestamp(uint64_t new_timestamp);
+
+    /**
+     * \brief Setter for the interval field.
+     *
+     * \param new_interval The interval to be set.
+     */
+    void interval(uint16_t new_interval);
+
+    /**
+     * \brief Returns the frame's header length.
+     *
+     * \return An uint32_t with the header's size.
+     * \sa PDU::header_size()
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Clones this PDU.
+     *
+     * \sa PDU::clone()
+     */
+    Dot11ProbeResponse* clone() const {
+        return new Dot11ProbeResponse(*this);
+    }
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \brief Check wether this PDU matches the specified flag.
+     * \param flag The flag to match
+     * \sa PDU::matches_flag
+     */
+    bool matches_flag(PDUType flag) const {
+       return flag == pdu_flag || Dot11ManagementFrame::matches_flag(flag);
+    }
+protected:
+
+private:
+    TINS_BEGIN_PACK
+    struct ProbeResp {
+        uint64_t timestamp;
+        uint16_t interval;
+        capability_information capability;
+    } TINS_END_PACK;
+
+    ProbeResp _body;
+
+    uint32_t write_fixed_parameters(uint8_t *buffer, uint32_t total_sz);
+};
+} // namespace Tins
+#endif // TINS_DOT11_DOT11_PROBE_H

include/tins/dot1q.h

@@ -0,0 +1,213 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TINS_DOT1Q_H
+#define TINS_DOT1Q_H
+
+#include "pdu.h"
+#include "endianness.h"
+#include "small_uint.h"
+
+namespace Tins {
+/**
+ * \class Dot1Q
+ * Represents an IEEE 802.1q PDU.
+ */
+class Dot1Q : public PDU {
+public:
+    /**
+     * This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::DOT1Q;
+    
+    /**
+     * Default constructor
+     */
+    Dot1Q(small_uint<12> tag_id = 0, bool append_pad = true);
+
+    /**
+     * \brief Constructs a Dot1Q object from a buffer and adds all 
+     * identifiable PDUs found in the buffer as children of this 
+     * one. 
+     * 
+     * If the next PDU is not recognized, then a RawPDU is used.
+     * 
+     * If there is not enough size for a Dot1Q header in the buffer,
+     * a malformed_packet exception is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    Dot1Q(const uint8_t *buffer, uint32_t total_sz);
+
+    // Getters
+
+    /**
+     * \brief Returns the header size.
+     *
+     * This metod overrides PDU::header_size. \sa PDU::header_size
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Returns the frame's trailer size.
+     * \return The trailer's size.
+     */
+    uint32_t trailer_size() const;
+
+    /**
+     * \brief Getter for the priority field.
+     * \return The stored priority field value.
+     */
+    small_uint<3> priority() const {
+        return _header.priority;
+    }
+
+    /**
+     * \brief Getter for the Canonical Format Identifier field.
+     * \return The stored CFI field value.
+     */
+    small_uint<1> cfi() const {
+        return _header.cfi;
+    }
+
+    /**
+     * \brief Getter for the VLAN ID field.
+     * \return The stored VLAN ID field value.
+     */
+    small_uint<12> id() const {
+        #if TINS_IS_LITTLE_ENDIAN
+            return _header.idL | (_header.idH << 8);
+        #else
+            return _header.id;
+        #endif
+    }
+
+    /**
+     * \brief Getter for the payload type field.
+     * \return The stored type field value.
+     */
+    uint16_t payload_type() const {
+        return Endian::be_to_host(_header.type);
+    }
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+    
+    /**
+     * \sa PDU::clone
+     */
+    Dot1Q *clone() const {
+        return new Dot1Q(*this);
+    }
+
+    /**
+     * \brief Retrieves the flag indicating whether padding will be
+     * appended at the end of this packet.
+     */
+    bool append_padding() const {
+        return _append_padding;
+    }
+
+    // Setters
+
+    /**
+     * \brief Setter for the priority field.
+     * \param new_priority The new priority field value.
+     */
+    void priority(small_uint<3> new_priority);
+
+    /**
+     * \brief Setter for the Canonical Format Identifie field.
+     * \param new_cfi The new CFI field value.
+     */
+    void cfi(small_uint<1> new_cfi);
+
+    /**
+     * \brief Setter for the VLAN ID field.
+     * \param new_id The new VLAN ID field value.
+     */
+    void id(small_uint<12> new_id);
+
+    /**
+     * \brief Setter for the payload type field.
+     * \param new_type The new type field value.
+     */
+    void payload_type(uint16_t new_type);
+    
+    /**
+     * \brief Indicates whether the appropriate padding will be 
+     * at the end of the packet.
+     * 
+     * This flag could be disabled in case two or more contiguous Dot1Q 
+     * PDUs are added to a packet. In that case, only the Dot1Q which is 
+     * closer to the link layer should add the padding at the end.
+     * 
+     * \param value A boolean indicating whether padding will be appended.
+     */
+    void append_padding(bool value);
+    
+    /** 
+     * \brief Check wether ptr points to a valid response for this PDU.
+     *
+     * \sa PDU::matches_response
+     * \param ptr The pointer to the buffer.
+     * \param total_sz The size of the buffer.
+     */
+    bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
+private:
+    void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
+
+    TINS_BEGIN_PACK
+    struct dot1q_hdr {
+        #if TINS_IS_BIG_ENDIAN
+            uint16_t priority:3,
+                    cfi:1,
+                    id:12;
+            uint16_t type;
+        #else
+            uint16_t idH:4,
+                    cfi:1,
+                    priority:3,
+                    idL:8;
+            uint16_t type;
+        #endif
+    } TINS_END_PACK;
+    
+    static uint16_t get_id(const dot1q_hdr *hdr);
+    
+    dot1q_hdr _header;
+    bool _append_padding;
+};
+}
+
+#endif // TINS_DOT1Q_H

include/tins/dot3.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,22 +27,22 @@
  *
  */
 
-#ifndef TINS_IEEE802_3_H
-#define TINS_IEEE802_3_H
+#ifndef TINS_DOT3_H
+#define TINS_DOT3_H
 
 #include <stdint.h>
 #include "macros.h"
 #include "pdu.h"
 #include "endianness.h"
 #include "hw_address.h"
-#include "network_interface.h"
 
 namespace Tins {
 
     /** 
-     * \brief Class representing an Ethernet II PDU.
+     * \class Dot3
+     * \brief Class representing an IEEE 802.3 PDU.
      */
-    class IEEE802_3 : public PDU {
+    class Dot3 : public PDU {
     public:
         /**
          * \brief The address type.
@@ -55,33 +55,34 @@ namespace Tins {
         static const PDU::PDUType pdu_flag = PDU::IEEE802_3;
 
         /**
-         * \brief Represents the IEEE802_3 broadcast address.
+         * \brief Represents the Dot3 broadcast address.
          */
         static const address_type BROADCAST;
 
         /**
-         * \brief Constructor for creating an IEEE802_3 PDU
+         * \brief Constructor for creating an Dot3 PDU
          *
-         * Constructor that builds an IEEE802_3 PDU taking the interface name,
+         * Constructor that builds an Dot3 PDU taking the interface name,
          * destination's and source's MAC.
          *
-         * \param iface string containing the interface's name from where to send the packet.
          * \param dst_hw_addr The destination hardware address.
          * \param src_hw_addr The source hardware address.
          * \param child The PDU which will be set as the inner PDU.
          */
-        IEEE802_3(const NetworkInterface& iface = NetworkInterface(), 
-                  const address_type &dst_hw_addr = address_type(), 
-                  const address_type &src_hw_addr = address_type(), 
-                  PDU* child = 0);
+        Dot3(const address_type &dst_hw_addr = address_type(), 
+            const address_type &src_hw_addr = address_type());
 
         /**
-         * \brief Constructor which creates an IEEE802_3 object from a buffer and adds all identifiable
-         * PDUs found in the buffer as children of this one.
+         * \brief Constructs a Dot3 object from a buffer and adds a
+         * LLC object with the remaining data as the inner PDU.
+         * 
+         * If there is not enough size for a Dot3 header, a 
+         * malformed_packet exception is thrown.
+         * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
          */
-        IEEE802_3(const uint8_t *buffer, uint32_t total_sz);
+        Dot3(const uint8_t *buffer, uint32_t total_sz);
 
         /* Getters */
         /**
@@ -98,13 +99,6 @@ namespace Tins {
          */
         address_type src_addr() const { return _eth.src_mac; }
 
-        /**
-         * \brief Getter for the interface.
-         *
-         * \return The network interface.
-         */
-        const NetworkInterface &iface() const { return this->_iface; }
-
         /**
          * \brief Getter for the length field.
          * \return The length field value.
@@ -127,13 +121,6 @@ namespace Tins {
          */
         void src_addr(const address_type &new_src_mac);
 
-        /**
-         * \brief Setter for the interface.
-         *
-         * \param new_iface The interface in which to send this PDU.
-         */
-        void iface(const NetworkInterface &new_iface);
-
         /**
          * \brief Setter for the length field.
          *
@@ -143,7 +130,7 @@ namespace Tins {
 
         /* Virtual methods */
         /**
-         * \brief Returns the IEEE802_3 frame's header length.
+         * \brief Returns the Dot3 frame's header length.
          *
          * \return An uint32_t with the header's size.
          * \sa PDU::header_size()
@@ -154,48 +141,36 @@ namespace Tins {
         /**
          * \sa PDU::send()
          */
-        void send(PacketSender &sender);
+        void send(PacketSender &sender, const NetworkInterface &iface);
         #endif // WIN32
 
-        /** \brief Check wether ptr points to a valid response for this PDU.
+        /** 
+         * \brief Check wether ptr points to a valid response for this PDU.
          *
          * \sa PDU::matches_response
          * \param ptr The pointer to the buffer.
          * \param total_sz The size of the buffer.
          */
-        bool matches_response(uint8_t *ptr, uint32_t total_sz);
+        bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
 
         #ifndef WIN32
-        /** \brief Receives a matching response for this packet.
-         *
+        /** 
          * \sa PDU::recv_response
-         * \param sender The packet sender which will receive the packet.
          */
-        PDU *recv_response(PacketSender &sender);
+        PDU *recv_response(PacketSender &sender, const NetworkInterface &iface);
         #endif // WIN32
 
         /**
          * \brief Getter for the PDU's type.
          * \sa PDU::pdu_type
          */
-        PDUType pdu_type() const { return PDU::IEEE802_3; }
-
-        /** 
-         * \brief Clones this pdu, filling the corresponding header with data
-         * extracted from a buffer.
-         *
-         * \param ptr The pointer to the from from which the data will be extracted.
-         * \param total_sz The size of the buffer.
-         * \return The cloned PDU.
-         * \sa PDU::clone_packet
-         */
-        PDU *clone_packet(const uint8_t *ptr, uint32_t total_sz);
+        PDUType pdu_type() const { return pdu_flag; }
 
         /**
          * \sa PDU::clone
          */
-        IEEE802_3 *clone() const {
-            return new IEEE802_3(*this);
+        Dot3 *clone() const {
+            return new Dot3(*this);
         }
     private:
         /**
@@ -212,9 +187,8 @@ namespace Tins {
 
 
         ethhdr _eth;
-        NetworkInterface _iface;
     };
 }
 
 
-#endif // TINS_IEEE802_3_H
+#endif // TINS_DOT3_H

include/tins/eapol.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -46,7 +46,8 @@ namespace Tins {
     /** \endcond */
     
     /**
-     * \brief Class that represents the EAP encapsulation over LAN.
+     * \class EAPOL
+     * \brief Represents the EAP encapsulation over LAN.
      */
     class EAPOL : public PDU {
     public:
@@ -67,6 +68,12 @@ namespace Tins {
         /**
          * \brief Static method to instantiate the correct EAPOL subclass 
          * based on a raw buffer.
+         * 
+         * If no valid EAPOL type is detected, a null pointer is returned.
+         * 
+         * \sa RC4EAPOL
+         * \sa RSNEAPOL
+         * 
          * \param buffer The buffer from which the data will be taken.
          * \param total_sz The total size of the buffer.
          */
@@ -197,12 +204,16 @@ namespace Tins {
         static const size_t key_sign_size = 16;
     
         /**
-         * \brief Creates an instance of RC4EAPOL
+         * \brief Default constructor.
          */
         RC4EAPOL();
         
         /**
-         * \brief Constructor which creates an RC4EAPOL object from a buffer.
+         * \brief Constructs a RC4EAPOL object from a buffer.
+         * 
+         * If there is not enough size for a RC4EAPOL header in the 
+         * buffer, a malformed_packet exception is thrown.
+         * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
          */
@@ -396,7 +407,11 @@ namespace Tins {
         RSNEAPOL();
         
         /**
-         * \brief Constructor which creates an RSNEAPOL object from a buffer.
+         * \brief Constructs a RSNEAPOL object from a buffer.
+         * 
+         * If there is not enough size for the RSNEAPOL header, a
+         * malformed_packet exception is thrown.
+         * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
          */
@@ -459,8 +474,8 @@ namespace Tins {
         const key_type &key() const { return _key; }
         
         /**
-         * \brief Getter for the key_mic field.
-         * \return The key_mic field.
+         * \brief Getter for the key mic field.
+         * \return 1 if this EAPOL PDU contains a valid MIC, 0 otherwise.
          */
         small_uint<1> key_mic() const { return _header.key_mic; };
 
@@ -486,17 +501,18 @@ namespace Tins {
          * \brief Getter for the encrypted field.
          * \return The encrypted field.
          */
-        small_uint<1 > encrypted() const { return _header.encrypted; };
+        small_uint<1> encrypted() const { return _header.encrypted; };
 
         /**
-         * \brief Getter for the key_descriptor field.
-         * \return The key_descriptor field.
+         * \brief Getter for the key descriptor field.
+         * \return The key descriptor field.
          */
         small_uint<3> key_descriptor() const { return _header.key_descriptor; };
 
         /**
-         * \brief Getter for the key_t field.
-         * \return The key_t field.
+         * \brief Getter for the key type field.
+         * 
+         * \return 1 if this is a pairwise key, 0 otherwise.
          */
         small_uint<1> key_t() const { return _header.key_t; };
 

include/tins/endianness.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -55,6 +55,16 @@
 
 namespace Tins {
 namespace Endian {
+    /** 
+     * \brief "Changes" a 8-bit integral value's endianess. This is an
+     * identity function.
+     *
+     * \param data The data to convert.
+     */
+    inline uint8_t do_change_endian(uint8_t data) {
+        return data;
+    }
+    
     /** 
      * \brief Changes a 16-bit integral value's endianess.
      *
@@ -80,7 +90,7 @@ namespace Endian {
      * \param data The data to convert.
      */
      inline uint64_t do_change_endian(uint64_t data) {
-        return (((uint64_t)(do_change_endian((uint32_t)((data << 32) >> 32))) << 32) |
+        return (((uint64_t)(do_change_endian((uint32_t)(data & 0xffffffff))) << 32) |
                 (do_change_endian(((uint32_t)(data >> 32)))));
      }
      
@@ -100,6 +110,11 @@ namespace Endian {
     template<size_t>
     struct conversion_dispatcher;
     
+    template<>
+    struct conversion_dispatcher<sizeof(uint8_t)> 
+    : public conversion_dispatch_helper<uint8_t> 
+    { };
+    
     template<>
     struct conversion_dispatcher<sizeof(uint16_t)> 
     : public conversion_dispatch_helper<uint16_t> 

include/tins/ethernetII.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -35,12 +35,12 @@
 #include "pdu.h"
 #include "endianness.h"
 #include "hw_address.h"
-#include "network_interface.h"
 
 namespace Tins {
 
     /**
-     * \brief Class representing an Ethernet II PDU.
+     * \class EthernetII
+     * \brief Represents an Ethernet II PDU.
      */
     class EthernetII : public PDU {
     public:
@@ -60,24 +60,23 @@ namespace Tins {
         static const address_type BROADCAST;
 
         /**
-         * \brief Constructor for creating an ethernet PDU
+         * \brief Constructs an ethernet II PDU.
          *
-         * Constructor that builds an ethernet PDU taking the interface name,
-         * destination's and source's MAC.
-         *
-         * \param iface string containing the interface's name from where to send the packet.
-         * \param dst_hw_addr address_type containing the destination's MAC(optional).
-         * \param src_hw_addr address_type containing the source's MAC(optional).
-         * \param child PDU* with the PDU contained by the ethernet PDU (optional).
+         * \param dst_hw_addr address_type containing the destination's MAC.
+         * \param src_hw_addr address_type containing the source's MAC.
          */
-        EthernetII(const NetworkInterface& iface = NetworkInterface(), 
-                    const address_type &dst_hw_addr = address_type(), 
-                    const address_type &src_hw_addr = address_type(), 
-                    PDU* child = 0);
+        EthernetII(const address_type &dst_hw_addr = address_type(), 
+                    const address_type &src_hw_addr = address_type());
 
         /**
-         * \brief Constructor which creates an EthernetII object from a buffer and adds all identifiable
-         * PDUs found in the buffer as children of this one.
+         * \brief Constructs a EthernetII object from a buffer and adds 
+         * all identifiable PDUs found in the buffer as children of 
+         * this one.
+         * 
+         * If the next PDU is not recognized, then a RawPDU is used.
+         * 
+         * If there is not enough size for a EthernetII header in the 
+         * buffer, a malformed_packet exception is thrown.
          * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
@@ -100,13 +99,6 @@ namespace Tins {
          */
         address_type src_addr() const { return _eth.src_mac; }
 
-        /**
-         * \brief Getter for the interface.
-         *
-         * \return Returns the interface in which this PDU will be sent.
-         */
-        const NetworkInterface &iface() const { return _iface; }
-
         /**
          * \brief Getter for the payload_type
          * \return The payload type.
@@ -129,13 +121,6 @@ namespace Tins {
          */
         void src_addr(const address_type &new_src_addr);
 
-        /**
-         * \brief Setter for the interface.
-         *
-         * \param new_iface the interface to be set.
-         */
-        void iface(const NetworkInterface& new_iface);
-
         /**
          * \brief Setter for the payload type.
          *
@@ -152,29 +137,38 @@ namespace Tins {
          */
         uint32_t header_size() const;
         
+        /**
+         * \brief Returns the ethernet II frame's padding.
+         *
+         * \return An uint32_t with the padding size.
+         * \sa PDU::trailer_size()
+         */
+        uint32_t trailer_size() const;
+
         // Windows does not support sending L2 PDUs.
         #ifndef WIN32
         /**
          * \sa PDU::send()
          */
-        void send(PacketSender &sender);
+        void send(PacketSender &sender, const NetworkInterface &iface);
         #endif // WIN32
 
-        /** \brief Check wether ptr points to a valid response for this PDU.
+        /** 
+         * \brief Check wether ptr points to a valid response for this PDU.
          *
          * \sa PDU::matches_response
          * \param ptr The pointer to the buffer.
          * \param total_sz The size of the buffer.
          */
-        bool matches_response(uint8_t *ptr, uint32_t total_sz);
+        bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
 
         #ifndef WIN32
-        /** \brief Receives a matching response for this packet.
+        /** 
+         * \brief Receives a matching response for this packet.
          *
          * \sa PDU::recv_response
-         * \param sender The packet sender which will receive the packet.
          */
-        PDU *recv_response(PacketSender &sender);
+        PDU *recv_response(PacketSender &sender, const NetworkInterface &iface);
         #endif // WIN32
 
         /**
@@ -183,16 +177,6 @@ namespace Tins {
          */
         PDUType pdu_type() const { return PDU::ETHERNET_II; }
 
-        /** \brief Clones this pdu, filling the corresponding header with data
-         * extracted from a buffer.
-         *
-         * \param ptr The pointer to the from from which the data will be extracted.
-         * \param total_sz The size of the buffer.
-         * \return The cloned PDU.
-         * \sa PDU::clone_packet
-         */
-        PDU *clone_packet(const uint8_t *ptr, uint32_t total_sz);
-
         /**
          * \sa PDU::clone
          */
@@ -213,7 +197,6 @@ namespace Tins {
         void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
 
         ethhdr _eth;
-        NetworkInterface _iface;
     };
 
 }

include/tins/exceptions.h

@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TINS_EXCEPTIONS_H
+#define TINS_EXCEPTIONS_H
+
+#include <string>
+#include <stdexcept>
+
+namespace Tins {
+/**
+ * \brief Exception thrown when an option is not found.
+ */
+class option_not_found : public std::runtime_error {
+public:
+    option_not_found()
+    : std::runtime_error(std::string()) { }
+
+    // try to avoid allocations by doing this.
+    const char* what() const throw() {
+        return "Option not found";
+    }
+};
+
+/**
+ * \brief Exception thrown when a malformed packet is parsed.
+ */
+class malformed_packet : public std::runtime_error {
+public:
+    malformed_packet()
+    : std::runtime_error(std::string()) { }
+
+    const char* what() const throw() {
+        return "Malformed packet";
+    }
+};
+
+/**
+ * \brief Exception thrown when a PDU is not found when using PDU::rfind_pdu.
+ */
+class pdu_not_found : public std::runtime_error {
+public:
+    pdu_not_found()
+    : std::runtime_error(std::string()) { }
+
+    const char* what() const throw() {
+        return "PDU not found";
+    }
+};
+
+/**
+ * \brief Exception thrown when PDU::send requires a valid interface,
+ * but an invalid is used.
+ */
+class invalid_interface : public std::runtime_error {
+public:
+    invalid_interface()
+    : std::runtime_error(std::string()) { }
+
+    const char* what() const throw() {
+        return "Invalid interface";
+    }
+};
+
+/**
+ * \brief Exception thrown when a field is not present in frame.
+ */
+class field_not_present : public std::runtime_error {
+public:
+    field_not_present()
+    : std::runtime_error(std::string()) { }
+    const char* what() const throw() {
+        return "Field not present";
+    }
+};
+
+/**
+ * \brief Exception thrown when PacketSender fails to open a socket.
+ */
+class socket_open_error : public std::runtime_error {
+public:
+    socket_open_error(const std::string &msg)
+    : std::runtime_error(msg) { }
+};
+
+/**
+ * \brief Exception thrown when PacketSender fails to close a socket.
+ */
+class socket_close_error : public std::runtime_error {
+public:
+    socket_close_error(const std::string &msg)
+    : std::runtime_error(msg) { }
+};
+
+/**
+ * \brief Exception thrown when PacketSender fails to write on a socket.
+ */
+class socket_write_error : public std::runtime_error {
+public:
+    socket_write_error(const std::string &msg)
+    : std::runtime_error(msg) { }
+};
+
+/**
+ * \brief Exception thrown when an invalid socket type is provided
+ * to PacketSender.
+ */
+class invalid_socket_type : public std::exception {
+public:
+    const char *what() const throw() {
+        return "The provided socket type is invalid";
+    }
+};
+
+/**
+ * \brief Exception thrown when an unkown link layer PDU type is
+ * found while sniffing.
+ */
+class unknown_link_type : public std::exception {
+public:
+    const char *what() const throw() {
+        return "The sniffed link layer PDU type is unknown";
+    }
+};
+
+/**
+ * \brief Exception thrown when a malformed option is found.
+ */
+class malformed_option : public std::exception {
+public:
+    const char *what() const throw() {
+        return "Malformed option";
+    }
+};
+
+/**
+ * \brief Exception thrown when a call to tins_cast fails.
+ */
+class bad_tins_cast : public std::exception {
+public:
+    const char *what() const throw() {
+        return "Bad Tins cast";
+    }
+};
+
+/**
+ * \brief Exception thrown when sniffing a protocol that
+ * has been disabled at compile time.
+ */
+class protocol_disabled : public std::exception {
+public:
+    const char *what() const throw() {
+        return "Protocol disabled";
+    }
+};
+
+} // Tins
+
+#endif // TINS_EXCEPTIONS_H

include/tins/handshake_capturer.h

@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include "config.h"
+
+#if !defined(TINS_HANDSHAKE_CAPTURER_H)  && defined(HAVE_DOT11)
+#define TINS_HANDSHAKE_CAPTURER_H
+
+#include <vector>
+#include <map>
+#include <utility>
+#include "hw_address.h"
+#include "eapol.h"
+
+// .h
+namespace Tins {
+    /**
+     * \brief Generic EAPOL handshake.
+     *
+     * Stores both the client and supplicant addresses, as well as 
+     * all of the EAPOL packets used during the handshake.
+     */
+    template<typename T>
+    class EAPOLHandshake {
+    public:
+        typedef std::vector<T> container_type;
+        typedef HWAddress<6> address_type;
+        
+        /**
+         * \brief Default constructor.
+         */
+        EAPOLHandshake() { }
+
+        /**
+         * Constructs an EAPOLHandshake object.
+         * 
+         * \param client_address The client address.
+         * \param supplicant_address The supplicant address.
+         * \param cont The container that holds the EAPOL packets used
+         * in the handshake.
+         */
+        EAPOLHandshake(const address_type &client_address, 
+          const address_type &supplicant_address, const container_type &cont) 
+        : cl_address_(client_address), suppl_address_(supplicant_address), 
+        handshake_(cont) 
+        {
+            
+        }
+        
+        /**
+         * \return const address_type&
+         */
+        const address_type &client_address() const {
+            return cl_address_;
+        }
+        
+        /**
+         * \return const address_type&
+         */
+        const address_type &supplicant_address() const {
+            return suppl_address_;
+        }
+        
+        /**
+         * \return const container_type&
+         */
+        const container_type &handshake() const {
+            return handshake_;
+        }
+    private:
+        address_type cl_address_, suppl_address_;
+        container_type handshake_;
+    };
+    
+    /**
+     * The type used to store RSN handshakes.
+     */
+    typedef EAPOLHandshake<RSNEAPOL> RSNHandshake;
+    
+    /**
+     * Captures 802.1X RSN handshakes.
+     */
+    class RSNHandshakeCapturer {
+    public:
+        /**
+         * The type of handshakes that will be captured.
+         */
+        typedef RSNHandshake handshake_type;
+
+        /**
+         * The type in which all of the captured handshakes
+         * will be stored.
+         */
+        typedef std::vector<handshake_type> handshakes_type;
+        
+        /**
+         * \brief Processes a packet.
+         * 
+         * This will fetch the RSNEAPOL layer, if any, and store
+         * it in an intermediate storage. When a handshake is 
+         * completed, it will be stored separately. 
+         *
+         * \sa RSNHandshakeCapturer::handshakes
+         */
+        bool process_packet(const PDU &pdu);
+
+        /**
+         * \brief Retrieves the completed handshakes.
+         *
+         * This will return the handshakes that have been completed 
+         * so far. A handshake is completed when the 4-way handshake
+         * is captured.
+         *
+         * \sa RSNHandshakeCapturer::clear_handshakes
+         */
+        const handshakes_type &handshakes() const {
+            return completed_handshakes_;
+        }
+
+        /**
+         * \brief Clears the completed handshakes.
+         *
+         * Since completed handshakes are stored in a std::vector,
+         * it is advisable to remove all of them once they have been 
+         * processed.
+         */
+        void clear_handshakes() {
+            completed_handshakes_.clear();
+        }
+    private:
+        typedef handshake_type::address_type address_type;
+        typedef handshake_type::container_type eapol_list;
+        typedef std::map<std::pair<address_type, address_type>, eapol_list> handshake_map;
+    
+        bool do_insert(const handshake_map::key_type &key, const RSNEAPOL *eapol, 
+          size_t expected);
+    
+        handshake_map handshakes_;
+        handshakes_type completed_handshakes_;
+    };
+}
+
+#endif // TINS_HANDSHAKE_CAPTURER_H

include/tins/hw_address.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -37,11 +37,28 @@
 #include <iomanip>
 #include <iostream>
 #include <sstream>
+#include "cxxstd.h"
 
 namespace Tins {
 /**
  * \class HWAddress
  * \brief Represents a hardware address.
+ *
+ * This class represents a hardware (MAC) address. It can 
+ * be constructed from it's string representation and you can
+ * iterate over the bytes that compose it.
+ *
+ * For example:
+ *
+ * \code
+ * // Construct it from a string.
+ * HWAddress<6> address("00:01:fa:9e:1a:cd");
+ *
+ * // Iterate over its bytes.
+ * for(auto element : address) {
+ *     // element will be each of the bytes(\x00, \x01, \xfa, etc)
+ * }
+ * \endcode
  */
 template<size_t n, typename Storage = uint8_t>
 class HWAddress {
@@ -68,12 +85,18 @@ public:
      * elements in this address.
      */
     static const size_t address_size = n;
+
+    /**
+     * \brief The broadcast address.
+     */
+    static const HWAddress<n, Storage> broadcast;
     
     /**
      * \brief Constructor from a const storage_type*.
      * 
      * If no pointer or a null pointer is provided, the address is 
-     * initialized to 00:00:..... 
+     * initialized to 00:00:00:00:00:00.
+     * 
      * This constructor is very usefull when passing zero initialized
      * addresses as arguments to other functions. You can use a 
      * literal 0, which will be implicitly converted to the empty address.
@@ -137,11 +160,18 @@ public:
      */
     template<size_t i>
     HWAddress(const HWAddress<i> &rhs) {
-        std::copy(
-            rhs.begin(),
-            rhs.begin() + std::min(i, n),
-            begin()
+        // Fill extra bytes
+        std::fill(
+            // Copy as most as we can
+            std::copy(
+                rhs.begin(),
+                rhs.begin() + std::min(i, n),
+                begin()
+            ),
+            end(),
+            0
         );
+        
     }
     
     /**
@@ -226,6 +256,27 @@ public:
         return address_size;
     }
     
+    /**
+     * \brief Indicates whether this is a broadcast address.
+     */
+    bool is_broadcast() const {
+        return *this == broadcast;
+    }
+    
+    /**
+     * \brief Indicates whether this is a multicast address.
+     */
+    bool is_multicast() const {
+        return (buffer[0] & 0x01);
+    }
+
+    /**
+     * \brief Indicates whether this is an unicast address.
+     */
+    bool is_unicast() const {
+        return !is_broadcast() && !is_multicast();
+    }
+
     /**
      * \brief Convert this address to a hex-notation std::string address.
      * 
@@ -236,6 +287,15 @@ public:
         oss << *this;
         return oss.str();
     }
+
+    /**
+     * \brief Retrieves the i-th storage_type in this address.
+     *
+     * \param i The element to retrieve.
+     */
+    storage_type operator[](size_t i) const {
+        return buffer[i];
+    }
     
     /**
      * \brief Writes this HWAddress in hex-notation to a std::ostream.
@@ -295,13 +355,16 @@ void HWAddress<n, Storage>::convert(const std::string &hw_addr,
   OutputIterator output) 
 {
     unsigned i(0);
+    size_t count(0);
     storage_type tmp;
-    while(i < hw_addr.size()) {
+    while(i < hw_addr.size() && count < n) {
         const unsigned end = i+2;
         tmp = storage_type();
         while(i < end) {
             if(hw_addr[i] >= 'a' && hw_addr[i] <= 'f')
                 tmp = (tmp << 4) | (hw_addr[i] - 'a' + 10);
+            else if(hw_addr[i] >= 'A' && hw_addr[i] <= 'F')
+                tmp = (tmp << 4) | (hw_addr[i] - 'A' + 10);
             else if(hw_addr[i] >= '0' && hw_addr[i] <= '9')
                 tmp = (tmp << 4) | (hw_addr[i] - '0');
             else if(hw_addr[i] == ':')
@@ -311,6 +374,7 @@ void HWAddress<n, Storage>::convert(const std::string &hw_addr,
             i++;
         }
         *(output++) = tmp;
+        count++;
         if(i < hw_addr.size()) {
             if(hw_addr[i] == ':')
                 i++;
@@ -318,6 +382,23 @@ void HWAddress<n, Storage>::convert(const std::string &hw_addr,
                 throw std::runtime_error("Invalid separator");
         }
     }
+    while(count++ < n) {
+        *(output++) = storage_type();
+    }
 }
-}
+
+template<size_t n, typename Storage>
+const HWAddress<n, Storage> HWAddress<n, Storage>::broadcast("ff:ff:ff:ff:ff:ff");
+} // namespace Tins
+#if TINS_IS_CXX11
+namespace std
+{
+template<size_t n>
+struct hash<Tins::HWAddress<n>> {
+    size_t operator()(const Tins::HWAddress<n> &addr) const {
+        return std::hash<std::string>()(addr.to_string());
+    }
+};
+} // namespace std
+#endif
 #endif // TINS_HWADDRESS_H

include/tins/icmp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -30,13 +30,28 @@
 #ifndef TINS_ICMP_H
 #define TINS_ICMP_H
 
+// Windows likes to define macros with not-so-common-names, which break
+// this code
+#ifdef WIN32
+    #ifdef TIMESTAMP_REQUEST
+        #undef TIMESTAMP_REQUEST
+    #endif // TIMESTAMP_REQUEST
+
+    #ifdef TIMESTAMP_REPLY
+        #undef TIMESTAMP_REPLY
+    #endif // TIMESTAMP_REPLY
+#endif // WIN32
+
 #include "macros.h"
 #include "pdu.h"
 #include "endianness.h"
+#include "ip_address.h"
 
 namespace Tins {
 
-    /** \brief Class that represents an ICMP PDU.
+    /** 
+     * \class ICMP
+     * \brief Class that represents an ICMP PDU.
      *
      * ICMP is the representation of the ICMP PDU. Instances of this class
      * must be sent over a level 3 PDU, this will otherwise fail.
@@ -48,6 +63,11 @@ namespace Tins {
          */
         static const PDU::PDUType pdu_flag = PDU::ICMP;
     
+        /**
+         * The type used to store addresses.
+         */
+        typedef IPv4Address address_type;
+
         /** \brief ICMP flags
          */
         enum Flags {
@@ -58,8 +78,12 @@ namespace Tins {
             ECHO_REQUEST     = 8,
             TIME_EXCEEDED    = 11,
             PARAM_PROBLEM    = 12,
+            TIMESTAMP_REQUEST = 13,
+            TIMESTAMP_REPLY  = 14,
             INFO_REQUEST     = 15,
-            INFO_REPLY       = 16
+            INFO_REPLY       = 16,
+            ADDRESS_MASK_REQUEST = 17,
+            ADDRESS_MASK_REPLY = 18
         };
 
         /**
@@ -71,8 +95,13 @@ namespace Tins {
         ICMP(Flags flag = ECHO_REQUEST);
 
         /**
-         * \brief Constructor which creates an ICMP object from a buffer and adds all identifiable
-         * PDUs found in the buffer as children of this one.
+         * \brief Constructs an ICMP object from a buffer.
+         * 
+         * If there is not enough size for an ICMP header, a 
+         * malformed_packet exception is thrown.
+         * 
+         * Any extra data in the buffer will be stored in a RawPDU.
+         * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
          */
@@ -91,13 +120,6 @@ namespace Tins {
          */
         void type(Flags type);
 
-        /**
-         * \brief Setter for checksum field.
-         *
-         * \param new_check uint16_t with the new checksum.
-         */
-        void check(uint16_t new_check);
-
         /**
          * \brief Setter for the id field.
          *
@@ -115,9 +137,9 @@ namespace Tins {
         /**
          * \brief Setter for the gateway field.
          *
-         * \param new_gw uint32_t with the new gateway.
+         * \param new_gw The new value for the gateway field.
          */
-        void gateway(uint32_t new_gw);
+        void gateway(address_type new_gw);
 
         /**
          * \brief Setter for the mtu field.
@@ -133,6 +155,34 @@ namespace Tins {
          */
         void pointer(uint8_t new_pointer);
 
+        /**
+         * \brief Setter for the original timestamp field.
+         *
+         * \param new_timestamp the value to be set.
+         */
+        void original_timestamp(uint32_t new_timestamp);
+
+        /**
+         * \brief Setter for the receive timestamp field.
+         *
+         * \param new_timestamp the value to be set.
+         */
+        void receive_timestamp(uint32_t new_timestamp);
+
+        /**
+         * \brief Setter for the transmit timestamp field.
+         *
+         * \param new_timestamp the value to be set.
+         */
+        void transmit_timestamp(uint32_t new_timestamp);
+
+        /**
+         * \brief Setter for the address mask field.
+         *
+         * \param new_mask the value to be set.
+         */
+        void address_mask(address_type new_mask);
+
         /**
          * \brief Sets echo request flag for this PDU.
          *
@@ -201,7 +251,7 @@ namespace Tins {
          * \param address Address of the gateway to which traffic should
          * be sent.
          */
-        void set_redirect(uint8_t icode, uint32_t address);
+        void set_redirect(uint8_t icode, address_type address);
 
         /**
          * \brief Getter for the ICMP type flag.
@@ -222,7 +272,7 @@ namespace Tins {
          *
          * \return Returns the checksum as an unit16_t.
          */
-        uint16_t check() const { return Endian::be_to_host(this->_icmp.check); }
+        uint16_t checksum() const { return Endian::be_to_host(_icmp.check); }
 
         /**
          * \brief Getter for the echo id.
@@ -241,23 +291,55 @@ namespace Tins {
         /**
          * \brief Getter for the gateway field.
          *
-         * \return Returns the gateways in an unit32_t.
+         * \return Returns the gateway field value.
          */
-         uint32_t gateway() const { return Endian::be_to_host(this->_icmp.un.gateway); }
+        address_type gateway() const { 
+            return address_type(Endian::be_to_host(_icmp.un.gateway)); 
+        }
 
          /**
           * \brief Getter for the pointer field.
           *
-          * \return Returns the pointer value.
+          * \return Returns the pointer field value.
           */
         uint8_t pointer() const { return this->_icmp.un.pointer; }
         
         /**
           * \brief Getter for the mtu field.
           *
-          * \return Returns the mtu value in an uint16_t.
+          * \return Returns the mtu field value.
           */
-        uint16_t mtu() const { return Endian::be_to_host(this->_icmp.un.frag.mtu); }
+        uint16_t mtu() const { return Endian::be_to_host(_icmp.un.frag.mtu); }
+
+        /**
+          * \brief Getter for the original timestamp field.
+          *
+          * \return Returns the original timestamp value.
+          */
+        uint32_t original_timestamp() const { return Endian::be_to_host(_orig_timestamp_or_address_mask); }
+
+        /**
+          * \brief Getter for the receive timestamp field.
+          *
+          * \return Returns the receive timestamp value.
+          */
+        uint32_t receive_timestamp() const { return Endian::be_to_host(_recv_timestamp); }
+
+        /**
+          * \brief Getter for the transmit timestamp field.
+          *
+          * \return Returns the transmit timestamp value.
+          */
+        uint32_t transmit_timestamp() const { return Endian::be_to_host(_trans_timestamp); }
+
+        /**
+          * \brief Getter for the address mask field.
+          *
+          * \return Returns the address mask value.
+          */
+        address_type address_mask() const { 
+            return address_type(Endian::be_to_host(_orig_timestamp_or_address_mask)); 
+        }
 
         /**
          * \brief Returns the header size.
@@ -274,7 +356,7 @@ namespace Tins {
          * \param ptr The pointer to the buffer.
          * \param total_sz The size of the buffer.
          */
-        bool matches_response(uint8_t *ptr, uint32_t total_sz);
+        bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
 
         /**
          * \brief Getter for the PDU's type.
@@ -282,17 +364,6 @@ namespace Tins {
          * \sa PDU::pdu_type
          */
         PDUType pdu_type() const { return PDU::ICMP; }
-
-        /**
-         * \brief Clones this pdu, filling the corresponding header with data
-         * extracted from a buffer.
-         *
-         * \param ptr The pointer to the from from which the data will be extracted.
-         * \param total_sz The size of the buffer.
-         * \return The cloned PDU.
-         * \sa PDU::clone_packet
-         */
-        PDU *clone_packet(const uint8_t *ptr, uint32_t total_sz);
         
         /**
          * \sa PDU::clone
@@ -319,6 +390,8 @@ namespace Tins {
                 uint8_t pointer;
             } un;
         } TINS_END_PACK;
+
+        void checksum(uint16_t new_check);
         
         /** \brief Serialices this ICMP PDU.
          * \param buffer The buffer in which the PDU will be serialized.
@@ -328,6 +401,7 @@ namespace Tins {
         void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
 
         icmphdr _icmp;
+        uint32_t _orig_timestamp_or_address_mask, _recv_timestamp, _trans_timestamp;
     };
 }
 

include/tins/icmpv6.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -40,10 +40,12 @@
 #include "small_uint.h"
 #include "hw_address.h"
 #include "small_uint.h"
+#include "cxxstd.h"
 
 namespace Tins {
 /**
- * Represents an ICMPv6 PDU.
+ * \class ICMPv6
+ * \brief Represents an ICMPv6 PDU.
  */
 class ICMPv6 : public PDU {
 public:
@@ -83,7 +85,7 @@ public:
     /**
      * The types of ICMPv6 options.
      */
-    enum Options {
+    enum OptionTypes {
         SOURCE_ADDRESS = 1,
         TARGET_ADDRESS,
         PREFIX_INFO,
@@ -134,40 +136,63 @@ public:
     /**
      * The type used to represent ICMPv6 options.
      */
-    typedef PDUOption<uint8_t> icmpv6_option;
+    typedef PDUOption<uint8_t, ICMPv6> option;
     
     /**
      * The type used to store options.
      */
-    typedef std::list<icmpv6_option> options_type;
+    typedef std::list<option> options_type;
     
     /**
      * \brief The type used to store the new home agent information 
      * option data.
-     * 
-     * The first member contains the home agent preference field, while
-     * the second one contains the home agent lifetime.
      */
-    typedef std::pair<uint16_t, uint16_t> new_ha_info_type;
+    typedef std::vector<uint16_t> new_ha_info_type;
     
     /**
      * The type used to store the source/target address list options.
      */
-    typedef std::vector<ipaddress_type> addr_list_type;
+    struct addr_list_type {
+        typedef std::vector<ipaddress_type> addresses_type;
+        
+        uint8_t reserved[6];
+        addresses_type addresses;
+        
+        addr_list_type(const addresses_type &addresses = addresses_type())
+        : addresses(addresses) 
+        {
+            std::fill(reserved, reserved + sizeof(reserved), 0);
+        }
+        
+        static addr_list_type from_option(const option &opt);
+    };
     
     /**
      * The type used to store the nonce option data.
      */
     typedef std::vector<uint8_t> nonce_type;
     
+    /**
+     * The type used to store the MTU option.
+     */
+    typedef std::pair<uint16_t, uint32_t> mtu_type;
+    
     /**
      * \brief The type used to store the neighbour advertisement 
      * acknowledgement option data.
-     * 
-     * The first member contains the option code field, while
-     * the second one contains the status.
      */
-    typedef std::pair<uint8_t, uint8_t> naack_type;
+    struct naack_type {
+        uint8_t code, status;
+        uint8_t reserved[4];
+        
+        naack_type(uint8_t code = 0, uint8_t status = 0)
+        : code(code), status(status)
+        {
+            std::fill(reserved, reserved + 4, 0);
+        }
+        
+        static naack_type from_option(const option &opt);
+    };
     
     /**
      * \brief The type used to store the link layer address option data.
@@ -206,6 +231,8 @@ public:
         {
             
         }
+        
+        static lladdr_type from_option(const option &opt);
     };
     
     /**
@@ -225,6 +252,8 @@ public:
         : prefix_len(prefix_len), A(A), L(L), 
           valid_lifetime(valid_lifetime), preferred_lifetime(preferred_lifetime),
           prefix(prefix) { }
+          
+        static prefix_info_type from_option(const option &opt);
     };
     
     /**
@@ -289,6 +318,8 @@ public:
         {
             std::fill(key_hash, key_hash + sizeof(key_hash), 0);
         }
+
+        static rsa_sign_type from_option(const option &opt);
     };
     
     /**
@@ -302,6 +333,8 @@ public:
           const ipaddress_type &address = ipaddress_type())
         : option_code(option_code), prefix_len(prefix_len), address(address)
         {}
+
+        static ip_prefix_type from_option(const option &opt);
     };
     
     /**
@@ -318,6 +351,8 @@ public:
           const ipaddress_type &address = ipaddress_type())
         : dist(dist), pref(pref), r(r), valid_lifetime(valid_lifetime),
           address(address) { }
+
+        static map_type from_option(const option &opt);
     };
     
     /**
@@ -335,6 +370,8 @@ public:
           uint32_t route_lifetime = 0, const prefix_type &prefix = prefix_type())
         : prefix_len(prefix_len), pref(pref), route_lifetime(route_lifetime),
           prefix(prefix) { }
+
+        static route_info_type from_option(const option &opt);
     };
     
     /**
@@ -349,6 +386,8 @@ public:
         recursive_dns_type(uint32_t lifetime = 0, 
           const servers_type &servers = servers_type())
         : lifetime(lifetime), servers(servers) {}
+
+        static recursive_dns_type from_option(const option &opt);
     };
     
     /**
@@ -363,6 +402,8 @@ public:
         handover_key_req_type(small_uint<4> AT = 0,
           const key_type &key = key_type())
         : AT(AT), key(key) { }
+
+        static handover_key_req_type from_option(const option &opt);
     };
     
     /**
@@ -374,6 +415,8 @@ public:
         handover_key_reply_type(uint16_t lifetime = 0, small_uint<4> AT = 0,
           const key_type &key = key_type())
         : handover_key_req_type(AT, key), lifetime(lifetime) { }
+
+        static handover_key_reply_type from_option(const option &opt);
     };
     
     /**
@@ -388,6 +431,8 @@ public:
         handover_assist_info_type(uint8_t option_code=0, 
           const hai_type &hai = hai_type())
         : option_code(option_code), hai(hai) { }
+
+        static handover_assist_info_type from_option(const option &opt);
     };
     
     /**
@@ -402,6 +447,8 @@ public:
         mobile_node_id_type(uint8_t option_code=0, 
           const mn_type &mn = mn_type())
         : option_code(option_code), mn(mn) { }
+
+        static mobile_node_id_type from_option(const option &opt);
     };
     
     /**
@@ -416,8 +463,58 @@ public:
         dns_search_list_type(uint32_t lifetime = 0,
           const domains_type &domains = domains_type())
         : lifetime(lifetime), domains(domains) { }
+
+        static dns_search_list_type from_option(const option &opt);
     };
-    
+
+    /**
+     * The type used to store the timestamp option.
+     */
+    struct timestamp_type {
+        uint8_t reserved[6];
+        uint64_t timestamp;
+
+        timestamp_type(uint64_t timestamp = 0)
+        : timestamp(timestamp)
+        {
+            std::fill(reserved, reserved + sizeof(reserved), 0);
+        }
+
+        static timestamp_type from_option(const option &opt);
+    };
+
+    /**
+     * The type used to store the shortcut limit option.
+     */
+    struct shortcut_limit_type {
+        uint8_t limit, reserved1;
+        uint32_t reserved2;
+
+        shortcut_limit_type(uint8_t limit = 0)
+        : limit(limit), reserved1(), reserved2()
+        {
+
+        }
+
+        static shortcut_limit_type from_option(const option &opt);
+    };
+
+    /**
+     * The type used to store new advertisement interval option.
+     */
+    struct new_advert_interval_type {
+        uint16_t reserved;
+        uint32_t interval;
+
+        new_advert_interval_type(uint32_t interval = 0)
+        : reserved(), interval(interval)
+        {
+
+        }
+
+        static new_advert_interval_type from_option(const option &opt);
+    };
+
     /**
      * \brief Constructs an ICMPv6 object.
      * 
@@ -429,8 +526,12 @@ public:
     ICMPv6(Types tp = ECHO_REQUEST);
     
     /**
-     * \brief Constructor which creates an ICMP object from a buffer and 
-     * adds all identifiable PDUs found in the buffer as children of this one.
+     * \brief Constructs an ICMPv6 object from a buffer.
+     * 
+     * If there is not enough size for an ICMPv6 header, a
+     * malformed_packet exception is thrown.
+     * 
+     * Any extra data is stored in a RawPDU.
      * 
      * \param buffer The buffer from which this PDU will be constructed.
      * \param total_sz The total size of the buffer.
@@ -736,7 +837,21 @@ public:
      * 
      * \param option The option to be added
      */
-    void add_option(const icmpv6_option &option);
+    void add_option(const option &option);
+    
+    #if TINS_IS_CXX11
+        /**
+         * \brief Adds an ICMPv6 option.
+         * 
+         * The option is move-constructed.
+         * 
+         * \param option The option to be added.
+         */
+        void add_option(option &&option) {
+            internal_add_option(option);
+            _options.push_back(std::move(option));
+        }
+    #endif
 
     /**
      * \brief Returns the header size.
@@ -745,6 +860,15 @@ public:
      * payload and options size. \sa PDU::header_size
      */
     uint32_t header_size() const;
+    
+    /** 
+     * \brief Check wether ptr points to a valid response for this PDU.
+     *
+     * \sa PDU::matches_response
+     * \param ptr The pointer to the buffer.
+     * \param total_sz The size of the buffer.
+     */
+    bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
 
     /**
      * \brief Searchs for an option that matchs the given flag.
@@ -755,7 +879,7 @@ public:
      * 
      * \param id The option identifier to be searched.
      */
-    const icmpv6_option *search_option(Options id) const;
+    const option *search_option(OptionTypes id) const;
 
     /**
      * \sa PDU::clone
@@ -792,33 +916,30 @@ public:
     /**
      * \brief Setter for the redirect header option.
      * 
-     * This method appends the 6 reserved bytes and inserts the 
-     * necessary padding at the end.
-     * 
      * \param data The redirect header option data.
      */
-    void redirect_header(PDU::serialization_type data);
+    void redirect_header(const byte_array &data);
     
     /**
      * \brief Setter for the MTU option.
      * 
      * \param value The MTU option data.
      */
-    void mtu(uint32_t value);
+    void mtu(const mtu_type& value);
     
     /**
      * \brief Setter for the shortcut limit option.
      * 
      * \param value The shortcut limit option data.
      */
-    void shortcut_limit(uint8_t value);
+    void shortcut_limit(const shortcut_limit_type& value);
     
     /**
      * \brief Setter for the new advertisement interval option.
      * 
      * \param value The new advertisement interval option data.
      */
-    void new_advert_interval(uint32_t value);
+    void new_advert_interval(const new_advert_interval_type &value);
     
     /**
      * \brief Setter for the new home agent information option.
@@ -853,7 +974,7 @@ public:
      * 
      * \param value The new timestamp option data.
      */
-    void timestamp(uint64_t value);
+    void timestamp(const timestamp_type &value);
     
     /**
      * \brief Setter for the new nonce option.
@@ -973,7 +1094,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    PDU::serialization_type redirect_header() const;
+    byte_array redirect_header() const;
     
     /**
      * \brief Getter for the MTU option.
@@ -981,7 +1102,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    uint32_t mtu() const;
+    mtu_type mtu() const;
     
     /**
      * \brief Getter for the shortcut limit option.
@@ -989,7 +1110,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    uint8_t shortcut_limit() const;
+    shortcut_limit_type shortcut_limit() const;
     
     /**
      * \brief Getter for the new advertisement interval option.
@@ -997,7 +1118,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    uint32_t new_advert_interval() const;
+    new_advert_interval_type new_advert_interval() const;
     
     /**
      * \brief Getter for the new home agent information option.
@@ -1037,7 +1158,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    uint64_t timestamp() const;
+    timestamp_type timestamp() const;
     
     /**
      * \brief Getter for the nonce option.
@@ -1181,21 +1302,30 @@ private:
         };
     } TINS_END_PACK;
     
+    void internal_add_option(const option &option);
     void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
     bool has_options() const;
-    uint8_t *write_option(const icmpv6_option &opt, uint8_t *buffer);
+    uint8_t *write_option(const option &opt, uint8_t *buffer);
     void parse_options(const uint8_t *&buffer, uint32_t &total_sz);
     void add_addr_list(uint8_t type, const addr_list_type &value);
-    addr_list_type search_addr_list(Options type) const;
+    addr_list_type search_addr_list(OptionTypes type) const;
     
     template<template <typename> class Functor>
-    const icmpv6_option *safe_search_option(Options opt, uint32_t size) const {
-        const icmpv6_option *option = search_option(opt);
+    const option *safe_search_option(OptionTypes opt, uint32_t size) const {
+        const option *option = search_option(opt);
         if(!option || Functor<uint32_t>()(option->data_size(), size))
             throw option_not_found();
         return option;
     }
 
+    template<typename T>
+    T search_and_convert(OptionTypes type) const {
+        const option *opt = search_option(type);
+        if(!opt)
+            throw option_not_found();
+        return opt->to<T>();
+    }
+
     icmp6hdr _header;
     ipaddress_type _target_address, _dest_address;
     options_type _options;

include/tins/ieee802_3.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -26,42 +26,15 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  */
- 
-#ifndef TINS_INTERNALS_H
-#define TINS_INTERNALS_H
 
-#include <sstream>
-#include <string>
-#include <stdint.h>
-#include "constants.h"
-#include "pdu.h"
+#ifndef TINS_IEEE802_3_H
+#define TINS_IEEE802_3_H
+
+#include "dot3.h"
 
-/**
- * \cond
- */
 namespace Tins {
-namespace Internals {
-    void skip_line(std::istream &input);
-    bool from_hex(const std::string &str, uint32_t &result);
-    
-    template<bool, typename>
-    struct enable_if {
-        
-    };
-
-    template<typename T>
-    struct enable_if<true, T> {
-        typedef T type;
-    };
-    
-    PDU *pdu_from_flag(Constants::Ethernet::e flag, const uint8_t *buffer, 
-      uint32_t size, bool rawpdu_on_no_match = true);
-    
-    Constants::Ethernet::e pdu_flag_to_ether_type(PDU::PDUType flag);
+    typedef Dot3 IEEE802_3;
 }
-}
-/**
- * \endcond
- */
 
-#endif
+
+#endif // TINS_IEEE802_3_H

include/tins/internals.h

@@ -0,0 +1,246 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TINS_INTERNALS_H
+#define TINS_INTERNALS_H
+
+#if TINS_IS_CXX11
+#include <type_traits>
+#endif
+
+#include <sstream>
+#include <string>
+#include <stdint.h>
+#include "constants.h"
+#include "pdu.h"
+#include "hw_address.h"
+
+/**
+ * \cond
+ */
+namespace Tins {
+class IPv4Address;
+class IPv6Address;
+
+namespace Internals {
+template<size_t n>
+class byte_array {
+public:
+    typedef uint8_t* iterator;
+    typedef const uint8_t* const_iterator;
+
+    byte_array() {
+        std::fill(begin(), end(), 0);
+    }
+
+    template<typename InputIterator>
+    byte_array(InputIterator start, InputIterator last) {
+        std::copy(start, last, data);
+    }
+
+    template<typename InputIterator>
+    byte_array(InputIterator start) {
+        std::copy(start, n, data);
+    }
+
+    uint8_t &operator[](size_t i) {
+        return data[i];
+    }
+
+    uint8_t operator[](size_t i) const{
+        return data[i];
+    }
+
+    iterator begin() {
+        return data;
+    }
+
+    iterator end() {
+        return data + n;
+    }
+
+    const_iterator begin() const {
+        return data;
+    }
+
+    const_iterator end() const {
+        return data + n;
+    }
+
+    size_t size() const {
+        return n;
+    }
+private:
+    uint8_t data[n];
+};
+
+void skip_line(std::istream &input);
+bool from_hex(const std::string &str, uint32_t &result);
+
+template<bool, typename T = void>
+struct enable_if {
+    typedef T type;
+};
+
+template<typename T>
+struct enable_if<false, T> {
+
+};
+
+PDU *pdu_from_flag(Constants::Ethernet::e flag, const uint8_t *buffer,
+  uint32_t size, bool rawpdu_on_no_match = true);
+PDU *pdu_from_flag(Constants::IP::e flag, const uint8_t *buffer,
+  uint32_t size, bool rawpdu_on_no_match = true);
+PDU *pdu_from_dlt_flag(int flag, const uint8_t *buffer,
+  uint32_t size, bool rawpdu_on_no_match = true);
+PDU *pdu_from_flag(PDU::PDUType type, const uint8_t *buffer, uint32_t size);
+
+Constants::Ethernet::e pdu_flag_to_ether_type(PDU::PDUType flag);
+Constants::IP::e pdu_flag_to_ip_type(PDU::PDUType flag);
+
+template<typename T>
+bool increment_buffer(T &addr) {
+    typename T::iterator it = addr.end() - 1;
+    while(it >= addr.begin() && *it == 0xff) {
+        *it = 0;
+        --it;
+    }
+    // reached end
+    if(it < addr.begin())
+        return true;
+    (*it)++;
+    return false;
+}
+
+template<typename T>
+bool decrement_buffer(T &addr) {
+    typename T::iterator it = addr.end() - 1;
+    while(it >= addr.begin() && *it == 0) {
+        *it = 0xff;
+        --it;
+    }
+    // reached end
+    if(it < addr.begin())
+        return true;
+    (*it)--;
+    return false;
+}
+
+bool increment(IPv4Address &addr);
+bool increment(IPv6Address &addr);
+bool decrement(IPv4Address &addr);
+bool decrement(IPv6Address &addr);
+template<size_t n>
+bool increment(HWAddress<n> &addr) {
+    return increment_buffer(addr);
+}
+template<size_t n>
+bool decrement(HWAddress<n> &addr) {
+    return decrement_buffer(addr);
+}
+
+IPv4Address last_address_from_mask(IPv4Address addr, IPv4Address mask);
+IPv6Address last_address_from_mask(IPv6Address addr, const IPv6Address &mask);
+template<size_t n>
+HWAddress<n> last_address_from_mask(HWAddress<n> addr, const HWAddress<n> &mask) {
+    typename HWAddress<n>::iterator addr_iter = addr.begin();
+    for(typename HWAddress<n>::const_iterator it = mask.begin(); it != mask.end(); ++it, ++addr_iter) {
+        *addr_iter = *addr_iter | ~*it;
+    }
+    return addr;
+}
+
+inline bool is_dot3(const uint8_t *ptr, size_t sz) {
+    return (sz >= 13 && ptr[12] < 8);
+}
+
+template<typename T>
+struct is_unsigned_integral {
+    static const bool value = false;
+};
+
+template<>
+struct is_unsigned_integral<uint8_t> {
+    static const bool value = true;
+};
+
+template<>
+struct is_unsigned_integral<uint16_t> {
+    static const bool value = true;
+};
+
+template<>
+struct is_unsigned_integral<uint32_t> {
+    static const bool value = true;
+};
+
+template<>
+struct is_unsigned_integral<uint64_t> {
+    static const bool value = true;
+};
+
+#if TINS_IS_CXX11
+
+// Part of C++14 standard library
+template<bool B, class T = void>
+using enable_if_t = typename std::enable_if<B,T>::type;
+
+// Template metaprogramming trait to determine if a functor can accept another parameter as an argument
+template <class T, class P, class=void>
+struct accepts_type : std::false_type { };
+
+template <class T, class P>
+struct accepts_type<T, P, enable_if_t<
+  std::is_same<  decltype(  std::declval<T>()(std::declval<P>())  ), bool>::value
+>> : std::true_type { };
+
+// use enable_if to invoke the Packet&& version of the sniff_loop handler if possible - otherwise fail to old behavior
+template <class Functor, class Packet>
+bool invoke_loop_cb(Functor& f, Packet& p, typename std::enable_if<accepts_type<Functor, Packet>::value, bool>::type* = 0) {
+  return f(std::move(p));
+}
+
+template <class Functor, class Packet>
+bool invoke_loop_cb(Functor& f, Packet& p, typename std::enable_if<!accepts_type<Functor, Packet>::value && accepts_type<Functor, Packet&>::value, bool>::type* = 0) {
+  return f(p);
+}
+
+template <class Functor, class Packet>
+bool invoke_loop_cb(Functor& f, Packet& p, typename std::enable_if<!accepts_type<Functor, Packet>::value && !accepts_type<Functor, Packet&>::value, bool>::type* = 0) {
+  return f(*p.pdu());
+}
+#endif
+
+} // namespace Internals
+} // namespace Tins
+/**
+ * \endcond
+ */
+
+#endif

include/tins/ip.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Nasel
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -37,10 +37,12 @@
 #include "ip_address.h"
 #include "pdu_option.h"
 #include "macros.h"
+#include "cxxstd.h"
 
 namespace Tins {
 
     /**
+     * \class IP
      * \brief Class that represents an IP PDU.
      * 
      * By default, IP PDUs are initialized, setting TTL to IP::DEFAULT_TTL,
@@ -168,7 +170,7 @@ namespace Tins {
         /**
          * The IP options type.
          */
-        typedef PDUOption<option_identifier> ip_option;
+        typedef PDUOption<option_identifier, IP> option;
 
         /**
          * The type of the security option.
@@ -183,6 +185,8 @@ namespace Tins {
             : security(sec), compartments(comp), 
               handling_restrictions(hand_res), transmission_control(tcc) 
               {}
+            
+            static security_type from_option(const option &opt);
         };
         
         /**
@@ -197,6 +201,8 @@ namespace Tins {
             generic_route_option_type(uint8_t ptr = 0, 
               routes_type rts = routes_type())
             : pointer(ptr), routes(rts) {}
+            
+            static generic_route_option_type from_option(const option &opt);
         };
         
         /**
@@ -217,7 +223,7 @@ namespace Tins {
         /**
          * The type used to store IP options.
          */
-        typedef std::list<ip_option> options_type;
+        typedef std::list<option> options_type;
 
         /**
          * \brief Constructor for building the IP PDU.
@@ -228,17 +234,18 @@ namespace Tins {
          *
          * \param ip_dst The destination ip address(optional).
          * \param ip_src The source ip address(optional).
-         * \param child pointer to a PDU which will be set as the inner_pdu 
-         * for the packet being constructed(optional).
          */
         IP(address_type ip_dst = address_type(), 
-            address_type ip_src = address_type(), 
-            PDU *child = 0);
+            address_type ip_src = address_type());
 
         /**
-         * \brief Constructor which constructs an IP object from a buffer 
-         * and adds all identifiable PDUs found in the buffer as children 
-         * of this one.
+         * \brief Constructs an IP object from a buffer and adds all 
+         * identifiable PDUs found in the buffer as children of this 
+         * one.
+         * 
+         * If there is not enough size for an IP header, a 
+         * malformed_packet exception is thrown.
+         * 
          * \param buffer The buffer from which this PDU will be constructed.
          * \param total_sz The total size of the buffer.
          */
@@ -302,7 +309,7 @@ namespace Tins {
          *
          * \return The checksum for this IP PDU.
          */
-        uint16_t check() const { return Endian::be_to_host(_ip.check); }
+        uint16_t checksum() const { return Endian::be_to_host(_ip.check); }
 
         /**
          * \brief Getter for the source address field.
@@ -331,13 +338,6 @@ namespace Tins {
 
         /* Setters */
 
-        /**
-         * \brief Setter for the header length field.
-         *
-         * \param new_head_len The new header length.
-         */
-        void head_len(small_uint<4> new_head_len);
-
         /**
          * \brief Setter for the type of service field.
          *
@@ -345,13 +345,6 @@ namespace Tins {
          */
         void tos(uint8_t new_tos);
 
-        /**
-         * \brief Setter for the total length field.
-         *
-         * \param new_tot_len The new total length.
-         */
-        void tot_len(uint16_t new_tot_len);
-
         /**
          * \brief Setter for the id field.
          *
@@ -376,17 +369,21 @@ namespace Tins {
         /**
          * \brief Setter for the protocol field.
          *
+         * Note that this protocol will be overwritten using the 
+         * inner_pdu's protocol type during serialization unless the IP 
+         * datagram is fragmented. 
+         * 
+         * If the packet is fragmented and was originally sniffed, the
+         * original protocol type will be kept when serialized.
+         * 
+         * If this packet has been crafted manually and the inner_pdu
+         * is, for example, a RawPDU, then setting the protocol yourself
+         * is necessary.
+         * 
          * \param new_protocol The new protocol.
          */
         void protocol(uint8_t new_protocol);
 
-        /**
-         * \brief Setter for the checksum field.
-         *
-         * \param new_check The new checksum.
-         */
-        void check(uint16_t new_check);
-
         /**
          * \brief Setter for the source address field.
          *
@@ -414,9 +411,37 @@ namespace Tins {
          * The option is added after the last option in the option 
          * fields.
          * 
-         * \param option The option to be added
+         * \param opt The option to be added
          */
-        void add_option(const ip_option &option);
+        void add_option(const option &opt);
+        
+        #if TINS_IS_CXX11
+            /**
+             * \brief Adds an IP option.
+             * 
+             * The option is move-constructed.
+             * 
+             * \param opt The option to be added.
+             */
+            void add_option(option &&opt) {
+                internal_add_option(opt);
+                _ip_options.push_back(std::move(opt));
+            }
+
+            /**
+             * \brief Adds an IP option.
+             * 
+             * The option is constructed from the provided parameters.
+             * 
+             * \param args The arguments to be used in the option's 
+             * constructor.
+             */
+            template<typename... Args>
+            void add_option(Args&&... args) {
+                _ip_options.emplace_back(std::forward<Args>(args)...);
+                internal_add_option(_ip_options.back());
+            }
+        #endif
 
         /**
          * \brief Searchs for an option that matchs the given flag.
@@ -427,7 +452,7 @@ namespace Tins {
          * 
          * \param id The option identifier to be searched.
          */
-        const ip_option *search_option(option_identifier id) const;
+        const option *search_option(option_identifier id) const;
 
         // Option setters
         
@@ -554,7 +579,7 @@ namespace Tins {
         /**
          * \sa PDU::send()
          */
-        void send(PacketSender &sender);
+        void send(PacketSender &sender, const NetworkInterface &);
 
         /**
          * \brief Check wether ptr points to a valid response for this PDU.
@@ -563,7 +588,7 @@ namespace Tins {
          * \param ptr The pointer to the buffer.
          * \param total_sz The size of the buffer.
          */
-        bool matches_response(uint8_t *ptr, uint32_t total_sz);
+        bool matches_response(const uint8_t *ptr, uint32_t total_sz) const;
 
         /**
          * \brief Receives a matching response for this packet.
@@ -571,7 +596,14 @@ namespace Tins {
          * \sa PDU::recv_response
          * \param sender The packet sender which will receive the packet.
          */
-        PDU *recv_response(PacketSender &sender);
+        PDU *recv_response(PacketSender &sender, const NetworkInterface &);
+
+        /**
+         * Indicates whether this PDU is fragmented.
+         *
+         * \return true if this PDU is fragmented, false otherwise.
+         */
+        bool is_fragmented() const;
 
         /**
          * \brief Getter for the PDU's type.
@@ -579,17 +611,6 @@ namespace Tins {
          */
         PDUType pdu_type() const { return PDU::IP; }
 
-        /**
-         * \brief Clones this pdu, filling the corresponding header with data
-         * extracted from a buffer.
-         *
-         * \param ptr The pointer to the from from which the data will be extracted.
-         * \param total_sz The size of the buffer.
-         * \return The cloned PDU.
-         * \sa PDU::clone_packet
-         */
-        PDU *clone_packet(const uint8_t *ptr, uint32_t total_sz);
-
         /**
          * \sa PDU::clone
          */
@@ -620,15 +641,22 @@ namespace Tins {
             /*The options start here. */
         } TINS_END_PACK;
 
+
+        void head_len(small_uint<4> new_head_len);
+        void tot_len(uint16_t new_tot_len);
+
+        void prepare_for_serialize(const PDU *parent);
+        void internal_add_option(const option &option);
         void init_ip_fields();
         void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
-        uint8_t* write_option(const ip_option &opt, uint8_t* buffer);
+        uint8_t* write_option(const option &opt, uint8_t* buffer);
         void add_route_option(option_identifier id, const generic_route_option_type &data);
         generic_route_option_type search_route_option(option_identifier id) const;
+        void checksum(uint16_t new_check);
 
         iphdr _ip;
+        uint16_t _options_size, _padded_options_size;
         options_type _ip_options;
-        uint32_t _options_size, _padded_options_size;
     };
 }
 

include/tins/ip_address.h

@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TINS_IPADDRESS_H
+#define TINS_IPADDRESS_H
+
+#include <string>
+#include <iostream>
+#include <stdint.h>
+#include "cxxstd.h"
+
+namespace Tins {
+/**
+ * \class IPv4Address
+ * \brief Abstraction of an IPv4 address.
+ */
+class IPv4Address {
+public:
+    /**
+     * The address size.
+     */
+    static const size_t address_size = sizeof(uint32_t);
+
+    /**
+     * The broadcast address.
+     */
+    static const IPv4Address broadcast;
+
+    /**
+     * \brief Constructor taking a const char*.
+     * 
+     * Constructs an IPv4Address from a dotted-notation address 
+     * cstring. If the pointer provided is null, then a default 
+     * IPv4Address object is constructed, which corresponds to 
+     * the 0.0.0.0 address.
+     * 
+     * \param ip const char* containing the dotted-notation address.
+     */
+    IPv4Address(const char *ip = 0);
+    
+    /**
+     * \brief Constructor taking a std::string.
+     * 
+     * Constructs an IPv4Address from a dotted-notation std::strings
+     * 
+     * \param ip std::string containing the dotted-notation address.
+     */
+    IPv4Address(const std::string &ip);
+    
+    /**
+     * \brief Constructor taking a IP address represented as a
+     * big endian integer.
+     * 
+     * This constructor should be used internally by PDUs that
+     * handle IP addresses. The provided integer <b>must</b> be
+     * be in big endian.
+     */
+    explicit IPv4Address(uint32_t ip);
+    
+    /**
+     * \brief User defined conversion to big endian integral value.
+     */
+    operator uint32_t() const;
+    
+    /**
+     * \brief Retrieve the string representation of this address.
+     * 
+     * \return std::string containing the representation of this address.
+     */
+    std::string to_string() const;
+    
+    /**
+     * \brief Compare this IPv4Address for equality.
+     * 
+     * \param rhs The address to be compared.
+     * \return bool indicating whether this address equals rhs.
+     */
+    bool operator==(const IPv4Address &rhs) const {
+        return ip_addr == rhs.ip_addr;
+    }
+    
+    /**
+     * \brief Compare this IPv4Address for inequality.
+     * 
+     * \param rhs The address to be compared.
+     * \return bool indicating whether this address is distinct 
+     * from rhs.
+     */
+    bool operator!=(const IPv4Address &rhs) const {
+        return !(*this == rhs);
+    }
+    
+    /**
+     * \brief Compare this IPv4Address for less-than inequality.
+     * 
+     * \param rhs The address to be compared.
+     * \return bool indicating whether this address is less-than rhs.
+     */
+    bool operator< (const IPv4Address &rhs) const {
+        return ip_addr < rhs.ip_addr;
+    }
+    
+    /**
+     * \brief Returns true if this is a private IPv4 address.
+     * 
+     * This takes into account the private network ranges defined in
+     * RFC 1918. Therefore, this method returns true if this address
+     * is in any of the following network ranges, false otherwise:
+     * 
+     * - 192.168.0.0/16
+     * - 10.0.0.0/8
+     * - 172.16.0.0/12
+     */
+    bool is_private() const;
+    
+    /**
+     * \brief Returns true if this is a loopback IPv4 address.
+     * 
+     * This method returns true if this address is in the address range
+     * 127.0.0.0/8, false otherwise.
+     */
+    bool is_loopback() const;
+
+    /**
+     * \brief Returns true if this is a multicast IPv4 address.
+     * 
+     * This method returns true if this address is in the address range
+     * 224.0.0.0/4, false otherwise.
+     */
+    bool is_multicast() const;
+
+    /**
+     * \brief Returns true if this is an unicast IPv4 address.
+     */
+    bool is_unicast() const;
+
+    /**
+     * \brief Returns true if this is a broadcast IPv4 address.
+     */
+    bool is_broadcast() const;
+    
+    /**
+     * \brief Writes this address to a std::ostream.
+     * 
+     * This method writes addr in a dotted-string notation address
+     * to the std::ostream argument.
+     * 
+     * \param output The std::ostream in which to write the address.
+     * \param addr The IPv4Address to be written.
+     * \return std::stream& pointing to output.
+     */
+    friend std::ostream &operator<<(std::ostream &output, const IPv4Address &addr);
+private:
+    uint32_t ip_to_int(const char* ip);
+
+    uint32_t ip_addr;
+};
+} //namespace Tins
+
+#if TINS_IS_CXX11
+namespace std
+{
+template<>
+struct hash<Tins::IPv4Address> {
+    size_t operator()(const Tins::IPv4Address &addr) const {
+        return std::hash<uint32_t>()(addr);
+    }
+};
+} // namespace std
+#endif
+
+
+#endif // TINS_IPADDRESS_H