Updated configure.ac and README files.

README

@@ -1,24 +1,27 @@
 ------------------------------------------------------------------------
-       libtins v1.1
+       libtins v1.3
 ------------------------------------------------------------------------
 
 
 -------------------------------- About ---------------------------------
 
-libtins is a C++ library for crafting, sending, sniffing and 
-interpreting raw network packets.
+libtins is a high-level, multiplatform C++ network packet sniffing and 
+crafting library. 
 
 Its main purpose is to provide the C++ developer an easy, efficient, 
 platform and endianess-independent way to create tools which need to 
 send, receive and manipulate specially crafted packets. 
 
-In order to read tutorials, examples and checkout some benchmarks which 
-show libtins' actual performance, please visit:
+In order to read tutorials, examples and checkout some benchmarks of the
+library, please visit:
 
-http://libtins.sourceforge.net 
+http://libtins.sourceforge.net/
 
 ------------------------------- Compiling ------------------------------
 
+libtins depends on libpcap and openssl, although the latter is not 
+necessary if some features of the library are disabled.
+
 In order to compile, execute:
 
 ./configure
@@ -32,11 +35,23 @@ like to generate a static library file as well, run:
 The generated static/shared library files will be located in the .libs
 directory.
 
-If you want to enable C++11 features, such as move semantics, use the
---enable-c++11 switch:
+libtins is noticeable faster if you enable C++11 support. Therefore, if
+your compiler supports this standard, then you should enable it. In 
+order to do so, use the --enable-c++11 switch:
 
 ./configure --enable-c++11
 
+If you want to disable WPA2 decryption support, which will remove 
+openssl as a dependency for compilation, use the --disable-wpa2 switch:
+
+./configure --disable-wpa2
+
+If you want to disable IEEE 802.11 support(this will also disable 
+RadioTap and WPA2 decryption), which will reduce the size of the 
+resulting library in around 20%, use the --disable-dot11 switch:
+
+./configure --disable-dot11
+
 ------------------------------ Installing-------------------------------
 
 Once you're done, if you want to install the header files and the 
@@ -55,4 +70,4 @@ ldconfig
 You might want to have a look at the examples located  in the "examples"
 directory. The same samples can be found online at:
 
-http://libtins.sourceforge.net/index.php?page=examples
+http://libtins.sourceforge.net/examples/

configure

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for libtins 1.2.
+# Generated by GNU Autoconf 2.69 for libtins 1.3.
 #
 # Report bugs to <matias.fontanini@gmail.com>.
 #
@@ -590,8 +590,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='libtins'
 PACKAGE_TARNAME='libtins'
-PACKAGE_VERSION='1.2'
-PACKAGE_STRING='libtins 1.2'
+PACKAGE_VERSION='1.3'
+PACKAGE_STRING='libtins 1.3'
 PACKAGE_BUGREPORT='matias.fontanini@gmail.com'
 PACKAGE_URL='http://libtins.sourceforge.net'
 
@@ -1331,7 +1331,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libtins 1.2 to adapt to many kinds of systems.
+\`configure' configures libtins 1.3 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1402,7 +1402,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libtins 1.2:";;
+     short | recursive ) echo "Configuration of libtins 1.3:";;
    esac
   cat <<\_ACEOF
 
@@ -1516,7 +1516,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libtins configure 1.2
+libtins configure 1.3
 generated by GNU Autoconf 2.69
 
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2006,7 +2006,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libtins $as_me 1.2, which was
+It was created by libtins $as_me 1.3, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
@@ -2934,7 +2934,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='libtins'
- VERSION='1.2'
+ VERSION='1.3'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -15431,7 +15431,7 @@ fi
 
 
 
-LIBTINS_VERSION=1:2:0
+LIBTINS_VERSION=1:3:0
 
 ac_config_files="$ac_config_files Makefile libtins.pc"
 
@@ -15965,7 +15965,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libtins $as_me 1.2, which was
+This file was extended by libtins $as_me 1.3, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -16032,7 +16032,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-libtins config.status 1.2
+libtins config.status 1.3
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 

configure.ac

@@ -1,4 +1,4 @@
-AC_INIT([libtins], [1.2], [matias.fontanini@gmail.com], [libtins], [http://libtins.sourceforge.net])
+AC_INIT([libtins], [1.3], [matias.fontanini@gmail.com], [libtins], [http://libtins.sourceforge.net])
 AC_CANONICAL_SYSTEM
 AC_CONFIG_HEADER(include/config.h)
 AM_INIT_AUTOMAKE([-Wall -Werror -Wno-extra-portability foreign])
@@ -79,6 +79,6 @@ AC_ARG_ENABLE(
 AC_SUBST(CXXFLAGS)
 AC_SUBST(LIBS)
 AC_SUBST(LIBTINS_INCLUDE_DIR)
-AC_SUBST([LIBTINS_VERSION], [1:2:0])
+AC_SUBST([LIBTINS_VERSION], [1:3:0])
 AC_CONFIG_FILES([Makefile libtins.pc])
 AC_OUTPUT