Updated files for release.

fix armv5 alignment issues

CHANGES

@@ -1,3 +1,128 @@
+v3.1 - Sun Aug 24 21:39:43 ART 2014
+
+- Fixed ICMPv6 checksum error on serialization.
+
+- Fixed empty domain name encoding on DNS.
+
+- Changed the build system to CMake.
+
+v3.0 - Thu Aug  7 21:39:09 ART 2014
+
+- Timestamps can now be constructed from std::chrono::duration.
+
+- Packets can now be constructed from a PDU pointer and take ownership
+of it.
+
+- All protocols now set the next layer protocol flag, regardless if 
+it was already set. This was not done in some protocols, 
+like EthernetII, and as a consequence if the network layer protocol
+was replaced by other, the packet would be serialized incorrectly.
+
+- Fixed invalid parsing of some unknown DNS records.
+
+- Fixed unaligned memory accesses that were not supported under
+ARMv4 and ARMv5.
+
+- Added BaseSniffer::set_extract_raw_pdus.
+
+- Reduced minimum automake version to 1.11.
+
+- Added Utils::to_string(PDU::PDUType).
+
+- Fixed error compilations on Windows.
+
+- Fixed ICMPv6 checksum calculation.
+
+- Added method in IP and TCP to emplace an option (C++11 only).
+
+- Added small option optimization to PDUOption.
+
+- Fixed error compilation on RSNInformation.
+
+- Renamed ICMP::check to ICMP::checksum.
+
+- Added Sniffer support to set interface to promiscuous mode.
+
+- TCPStreamFollower now handles overlapping fragments correctly.
+
+- Fixed bugs in TCPStreamFollower which didn't allow it to follow
+stream correctly.
+
+- TCPStreamFollower now doesn't clear its state after every call to
+TCPStreamFollower::follow_streams.
+
+- Added IPv6 flag check to pdu_flag_to_ip_type.
+
+- Added DHCP::hostname to extract the hostname options.
+
+- Removed extra qualifier on SessionKeys::decrypt_unicast which 
+produced compilation errors on some platforms.
+
+- PacketSender::send now uses PDU::matches_flag to match specific
+PDU types.
+
+- Removed 'no newline at end of file' warnings.
+
+- Fixed bug when calling BIOCIMMEDIATE on *BSD.
+
+- Fixed bug on PacketSender::send_recv which didn't work under *BSD.
+
+- Fixed bug triggered by not including the string header.
+
+v2.0 - Thu Jan 23 11:09:38 ART 2014 
+
+- DNSResourceRecord was removed. Now DNS records are added using 
+DNS::Resource.
+
+- tins.h now includes ppi.h.
+
+- Done significant improvements in the speed of DNS parsing.
+
+- Added PDUOption<>::to<> which converts a PDUOption to a specific type.
+
+- Layer 3 packets sent using PacketSender::send_recv for which the 
+answer is a different PDU type.
+
+- ICMP::gateway now uses IPv4Address.
+
+- Added support for ICMP address mask request/reply.
+
+- Fixed bug in PacketSender when using send_recv and a layer 2 PDU. The 
+interface in which the packet was sent was not the default_interface 
+set when the sender was constructed.
+
+- IP packets sent using PacketSender::send_recv now match ICMP 
+responses.
+
+- Added support for ICMP timestamp request/reply packets. 
+ICMP::matches_response now works with these types of packets as well.
+
+- Added support for reassembling of fragmented IP packets via the
+IPv4Reassembler class.
+
+- Fragmented IP packet's inner_pdu PDUs are not decoded now.
+
+- Added 1000ms as the default read timeout used when calling 
+pcap_open_live. Added BaseSniffer::set_timeout to modify this parameter.
+
+- Added the --disable-dot11 configure switch.
+
+- Added support for IPSec.
+
+- Fixed bug triggered when ifaddrs::ifa_addr was null in 
+NetworkInterface::addresses.
+
+- Added another overload of Utils::route_entries which returns the
+result either than storing it in a parameter.
+
+- Added ARP monitor, WPS detector, DNS queries sniffer and DNS spoofer 
+examples.
+
+- Added another Sniffer constructor which doesn't expect the maximum
+capture size.
+
+- Added tins_cast as a replacement for dynamic_cast on PDUs.
+
 v1.2 - Mon oct  7 23:33:49 ART 2013
 
 - Added BaseSniffer::begin and BaseSniffer::end.

CMakeLists.txt

@@ -0,0 +1,134 @@
+CMAKE_MINIMUM_REQUIRED(VERSION 2.8.1)
+PROJECT(libtins)
+
+# Compile in release mode by default
+IF(NOT CMAKE_BUILD_TYPE)
+    MESSAGE(STATUS "Setting build type to 'RelWithDebInfo' as none was specified.")
+    SET(CMAKE_BUILD_TYPE RelWithDebInfo) 
+ELSE(NOT CMAKE_BUILD_TYPE)
+    MESSAGE(STATUS "Using specified '${CMAKE_BUILD_TYPE}' build type.")
+ENDIF(NOT CMAKE_BUILD_TYPE)
+
+# Default compilation settings
+SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
+
+# Build output checks
+OPTION(LIBTINS_BUILD_SHARED "Build libtins as a shared library." ON)
+IF(LIBTINS_BUILD_SHARED)
+    MESSAGE(
+        STATUS 
+        "Build will generate a shared library. "
+        "Use LIBTINS_BUILD_SHARED=0 to perform a static build"
+    )
+    SET(LIBTINS_TYPE SHARED)
+ELSE(LIBTINS_BUILD_SHARED)
+    MESSAGE(STATUS "Build will generate a static library.")
+    SET(LIBTINS_TYPE STATIC)
+ENDIF(LIBTINS_BUILD_SHARED)
+
+# The version number.
+SET(LIBTINS_VERSION_MAJOR 3)
+SET(LIBTINS_VERSION_MINOR 1)
+SET(LIBTINS_CPP_VERSION "${LIBTINS_VERSION_MAJOR}.${LIBTINS_VERSION_MINOR}")
+
+# Required Packages
+SET(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake/Modules/")
+
+# Look for libpcap
+FIND_PACKAGE(PCAP REQUIRED)
+
+# Set some Windows specific flags
+IF(WIN32)
+    # We need to link against these libs
+    SET(LIBTINS_OS_LIBS Ws2_32.lib Iphlpapi.lib)
+
+    # Add the NOMINMAX macro to avoid Windows' min and max macros.
+    # While compiling on windows, for some reason, WIN32 is not defined,
+    # maybe we could fix this later, but it's OK for now.
+    ADD_DEFINITIONS(-DNOMINMAX -DWIN32)
+ENDIF(WIN32)
+
+# Compilation options
+OPTION(LIBTINS_ENABLE_CXX11 "Compile libtins with c++11 features" OFF)
+IF(LIBTINS_ENABLE_CXX11)
+    SET(HAVE_CXX11 ON)
+    INCLUDE(CheckCXX11Features)
+    IF(HAS_CXX11_NULLPTR AND HAS_CXX11_RVALUE_REFERENCES)
+        MESSAGE(STATUS "Enabling C++11 features")
+        SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${CXX11_COMPILER_FLAGS}")
+    ELSE(HAS_CXX11_NULLPTR AND HAS_CXX11_RVALUE_REFERENCES)
+        MESSAGE(FATAL_ERROR "C++11 features requested but the compiler does not support them.")
+    ENDIF(HAS_CXX11_NULLPTR AND HAS_CXX11_RVALUE_REFERENCES)
+ELSE(LIBTINS_ENABLE_CXX11)
+    MESSAGE(
+        WARNING 
+        "Disabling C++11 features. Use LIBTINS_ENABLE_CXX11=1 to enable them. "
+        "Unless you are using an old compiler, you should enable this option, "
+        "as it increases the library's performance")
+ENDIF(LIBTINS_ENABLE_CXX11)
+
+OPTION(LIBTINS_ENABLE_DOT11 "Compile libtins with IEEE 802.11 support" ON)
+OPTION(LIBTINS_ENABLE_WPA2 "Compile libtins with WPA2 decryption features (requires OpenSSL)" ON)
+IF(LIBTINS_ENABLE_DOT11)
+    SET(HAVE_DOT11 ON)
+    MESSAGE(STATUS "Enabling IEEE 802.11 support.")
+    IF(LIBTINS_ENABLE_WPA2)
+        FIND_PACKAGE(OpenSSL REQUIRED)
+        SET(HAVE_WPA2_DECRYPTION ON)
+        MESSAGE(STATUS "Enabling WPA2 decryption support.")
+    ELSE(LIBTINS_ENABLE_WPA2)
+        MESSAGE(STATUS "Disabling WPA2 decryption support.")
+    ENDIF(LIBTINS_ENABLE_WPA2)
+ENDIF(LIBTINS_ENABLE_DOT11)
+
+SET(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/lib)
+SET(CMAKE_ARCHIVE_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/lib)
+
+# Congiguration file
+CONFIGURE_FILE(
+  "${PROJECT_SOURCE_DIR}/include/config.h.in"
+  "${PROJECT_SOURCE_DIR}/include/config.h"
+)
+
+ENABLE_TESTING()
+ADD_SUBDIRECTORY(include)
+ADD_SUBDIRECTORY(src)
+ADD_SUBDIRECTORY(tests)
+ADD_SUBDIRECTORY(examples)
+
+# Add all targets to the build-tree export set
+EXPORT(
+    TARGETS tins
+    FILE "${PROJECT_BINARY_DIR}/libtinsTargets.cmake"
+)
+
+# Export the package for use from the build-tree
+# (this registers the build-tree with a global CMake-registry)
+EXPORT(PACKAGE libtins)
+
+# Create the libtinsConfig.cmake and libtinsConfigVersion.cmake files
+# for the build tree
+SET(CONF_INCLUDE_DIRS "${PROJECT_SOURCE_DIR}/include")
+CONFIGURE_FILE(
+    libtinsConfig.cmake.in
+    "${PROJECT_BINARY_DIR}/libtinsConfig.cmake" @ONLY
+)
+CONFIGURE_FILE(
+    libtinsConfigVersion.cmake.in
+    "${PROJECT_BINARY_DIR}/libtinsConfigVersion.cmake" @ONLY
+)
+# Install the libtinsConfig.cmake and libtinsConfigVersion.cmake
+INSTALL(
+    FILES
+    "${PROJECT_BINARY_DIR}/libtinsConfig.cmake"
+   "${PROJECT_BINARY_DIR}/libtinsConfigVersion.cmake"
+   DESTINATION CMake
+   COMPONENT dev
+)
+
+# Install the export set for use with the install-tree
+INSTALL(
+    EXPORT libtinsTargets
+    DESTINATION CMake
+    COMPONENT dev
+)

LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2012, Nasel
+Copyright (c) 2012-2014, Matias Fontanini
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

Makefile.am

@@ -1,4 +1,4 @@
-AUTOMAKE_OPTIONS=subdir-objects
+AUTOMAKE_OPTIONS=subdir-objects 1.11
 ACLOCAL_AMFLAGS=${ACLOCAL_FLAGS} -I m4
 
 # pkg-config stuff
@@ -20,7 +20,6 @@ libtins_la_SOURCES=src/arp.cpp \
                     src/dhcp.cpp \
                     src/dhcpv6.cpp \
                     src/dns.cpp \
-                    src/dns_record.cpp \
                     src/dot3.cpp \
                     src/dot1q.cpp \
                     src/eapol.cpp \
@@ -28,9 +27,12 @@ libtins_la_SOURCES=src/arp.cpp \
                     src/icmp.cpp \
                     src/icmpv6.cpp \
                     src/internals.cpp \
-                    src/ip.cpp src/ip_address.cpp \
+                    src/ip_reassembler.cpp \
+                    src/ip.cpp \
+                    src/ip_address.cpp \
                     src/ipv6.cpp \
                     src/ipv6_address.cpp \
+                    src/ipsec.cpp \
                     src/llc.cpp \
                     src/loopback.cpp \
                     src/network_interface.cpp \
@@ -67,7 +69,7 @@ libtins_HEADERS = include/internals.h \
 							include/dot3.h \
 							include/small_uint.h \
 							include/ip.h \
-							include/dns_record.h \
+							include/ipsec.h \
 							include/eapol.h \
 							include/tcp_stream.h \
 							include/pppoe.h \
@@ -82,6 +84,7 @@ libtins_HEADERS = include/internals.h \
 							include/crypto.h \
 							include/packet.h \
 							include/llc.h \
+							include/ip_reassembler.h \
 							include/icmp.h \
 							include/hw_address.h \
 							include/packet_writer.h \

Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,23 +17,51 @@
 
 
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
     esac; \
-    test $$am__dry = yes; \
+  fi; \
-  }
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -55,12 +82,12 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = .
-DIST_COMMON = README $(am__configure_deps) $(libtins_HEADERS) \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(libtins_dot11_HEADERS) $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
-	$(srcdir)/Makefile.in $(srcdir)/libtins.pc.in \
+	$(top_srcdir)/include/config.h.in $(srcdir)/libtins.pc.in \
-	$(top_srcdir)/configure $(top_srcdir)/include/config.h.in \
+	depcomp $(libtins_HEADERS) $(libtins_dot11_HEADERS) AUTHORS \
-	AUTHORS COPYING INSTALL THANKS TODO config.guess config.sub \
+	README THANKS compile config.guess config.sub install-sh \
-	depcomp install-sh ltmain.sh missing
+	missing ltmain.sh
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_cxx_compile_stdcxx_11.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -108,10 +135,10 @@ libtins_la_LIBADD =
 am__dirstamp = $(am__leading_dot)dirstamp
 am_libtins_la_OBJECTS = src/arp.lo src/bootp.lo \
 	src/handshake_capturer.lo src/stp.lo src/pppoe.lo \
-	src/crypto.lo src/dhcp.lo src/dhcpv6.lo src/dns.lo \
+	src/crypto.lo src/dhcp.lo src/dhcpv6.lo src/dns.lo src/dot3.lo \
-	src/dns_record.lo src/dot3.lo src/dot1q.lo src/eapol.lo \
+	src/dot1q.lo src/eapol.lo src/ethernetII.lo src/icmp.lo \
-	src/ethernetII.lo src/icmp.lo src/icmpv6.lo src/internals.lo \
+	src/icmpv6.lo src/internals.lo src/ip_reassembler.lo src/ip.lo \
-	src/ip.lo src/ip_address.lo src/ipv6.lo src/ipv6_address.lo \
+	src/ip_address.lo src/ipv6.lo src/ipv6_address.lo src/ipsec.lo \
 	src/llc.lo src/loopback.lo src/network_interface.lo \
 	src/packet_sender.lo src/packet_writer.lo src/ppi.lo \
 	src/pdu.lo src/radiotap.lo src/address_range.lo src/rawpdu.lo \
@@ -122,22 +149,47 @@ am_libtins_la_OBJECTS = src/arp.lo src/bootp.lo \
 	src/dot11/dot11_assoc.lo src/dot11/dot11_auth.lo \
 	src/dot11/dot11_probe.lo src/dot11/dot11_control.lo
 libtins_la_OBJECTS = $(am_libtins_la_OBJECTS)
-libtins_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libtins_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
 	$(CXXFLAGS) $(libtins_la_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
 am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_@AM_V@)
+am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
+am__v_CXX_0 = @echo "  CXX     " $@;
+am__v_CXX_1 = 
 CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
-	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
-	$(LDFLAGS) -o $@
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
+am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
+am__v_CXXLD_0 = @echo "  CXXLD   " $@;
+am__v_CXXLD_1 = 
 SOURCES = $(libtins_la_SOURCES)
 DIST_SOURCES = $(libtins_la_SOURCES)
 am__can_run_installinfo = \
@@ -147,8 +199,27 @@ am__can_run_installinfo = \
   esac
 DATA = $(pkgconfig_DATA)
 HEADERS = $(libtins_HEADERS) $(libtins_dot11_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
+AM_RECURSIVE_TARGETS = cscope
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -158,14 +229,17 @@ am__remove_distdir = \
       && rm -rf "$(distdir)" \
       || { sleep 5 && rm -rf "$(distdir)"; }; \
   else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -290,7 +364,7 @@ target_vendor = @target_vendor@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = subdir-objects
+AUTOMAKE_OPTIONS = subdir-objects 1.11
 ACLOCAL_AMFLAGS = ${ACLOCAL_FLAGS} -I m4
 
 # pkg-config stuff
@@ -308,7 +382,6 @@ libtins_la_SOURCES = src/arp.cpp \
                     src/dhcp.cpp \
                     src/dhcpv6.cpp \
                     src/dns.cpp \
-                    src/dns_record.cpp \
                     src/dot3.cpp \
                     src/dot1q.cpp \
                     src/eapol.cpp \
@@ -316,9 +389,12 @@ libtins_la_SOURCES = src/arp.cpp \
                     src/icmp.cpp \
                     src/icmpv6.cpp \
                     src/internals.cpp \
-                    src/ip.cpp src/ip_address.cpp \
+                    src/ip_reassembler.cpp \
+                    src/ip.cpp \
+                    src/ip_address.cpp \
                     src/ipv6.cpp \
                     src/ipv6_address.cpp \
+                    src/ipsec.cpp \
                     src/llc.cpp \
                     src/loopback.cpp \
                     src/network_interface.cpp \
@@ -354,7 +430,7 @@ libtins_HEADERS = include/internals.h \
 							include/dot3.h \
 							include/small_uint.h \
 							include/ip.h \
-							include/dns_record.h \
+							include/ipsec.h \
 							include/eapol.h \
 							include/tcp_stream.h \
 							include/pppoe.h \
@@ -369,6 +445,7 @@ libtins_HEADERS = include/internals.h \
 							include/crypto.h \
 							include/packet.h \
 							include/llc.h \
+							include/ip_reassembler.h \
 							include/icmp.h \
 							include/hw_address.h \
 							include/packet_writer.h \
@@ -453,8 +530,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 include/config.h: include/stamp-h1
-	@if test ! -f $@; then rm -f include/stamp-h1; else :; fi
+	@test -f $@ || rm -f include/stamp-h1
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1; else :; fi
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1
 
 include/stamp-h1: $(top_srcdir)/include/config.h.in $(top_builddir)/config.status
 	@rm -f include/stamp-h1
@@ -468,6 +545,7 @@ distclean-hdr:
 	-rm -f include/config.h include/stamp-h1
 libtins.pc: $(top_builddir)/config.status $(srcdir)/libtins.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
+
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
@@ -494,12 +572,14 @@ uninstall-libLTLIBRARIES:
 
 clean-libLTLIBRARIES:
 	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	locs=`for p in $$list; do echo $$p; done | \
-	  test "$$dir" != "$$p" || dir=.; \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	  echo "rm -f \"$${dir}/so_locations\""; \
+	      sort -u`; \
-	  rm -f "$${dir}/so_locations"; \
+	test -z "$$locs" || { \
-	done
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
 src/$(am__dirstamp):
 	@$(MKDIR_P) src
 	@: > src/$(am__dirstamp)
@@ -516,7 +596,6 @@ src/crypto.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/dhcp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/dhcpv6.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/dns.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/dns_record.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/dot3.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/dot1q.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/eapol.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
@@ -524,10 +603,13 @@ src/ethernetII.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/icmp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/icmpv6.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/internals.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/ip_reassembler.lo: src/$(am__dirstamp) \
+	src/$(DEPDIR)/$(am__dirstamp)
 src/ip.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/ip_address.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/ipv6.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/ipv6_address.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/ipsec.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/llc.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/loopback.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
 src/network_interface.lo: src/$(am__dirstamp) \
@@ -573,105 +655,16 @@ src/dot11/dot11_probe.lo: src/dot11/$(am__dirstamp) \
 	src/dot11/$(DEPDIR)/$(am__dirstamp)
 src/dot11/dot11_control.lo: src/dot11/$(am__dirstamp) \
 	src/dot11/$(DEPDIR)/$(am__dirstamp)
+
 libtins.la: $(libtins_la_OBJECTS) $(libtins_la_DEPENDENCIES) $(EXTRA_libtins_la_DEPENDENCIES) 
-	$(libtins_la_LINK) -rpath $(libdir) $(libtins_la_OBJECTS) $(libtins_la_LIBADD) $(LIBS)
+	$(AM_V_CXXLD)$(libtins_la_LINK) -rpath $(libdir) $(libtins_la_OBJECTS) $(libtins_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
-	-rm -f src/address_range.$(OBJEXT)
+	-rm -f src/*.$(OBJEXT)
-	-rm -f src/address_range.lo
+	-rm -f src/*.lo
-	-rm -f src/arp.$(OBJEXT)
+	-rm -f src/dot11/*.$(OBJEXT)
-	-rm -f src/arp.lo
+	-rm -f src/dot11/*.lo
-	-rm -f src/bootp.$(OBJEXT)
-	-rm -f src/bootp.lo
-	-rm -f src/crypto.$(OBJEXT)
-	-rm -f src/crypto.lo
-	-rm -f src/dhcp.$(OBJEXT)
-	-rm -f src/dhcp.lo
-	-rm -f src/dhcpv6.$(OBJEXT)
-	-rm -f src/dhcpv6.lo
-	-rm -f src/dns.$(OBJEXT)
-	-rm -f src/dns.lo
-	-rm -f src/dns_record.$(OBJEXT)
-	-rm -f src/dns_record.lo
-	-rm -f src/dot11/dot11_assoc.$(OBJEXT)
-	-rm -f src/dot11/dot11_assoc.lo
-	-rm -f src/dot11/dot11_auth.$(OBJEXT)
-	-rm -f src/dot11/dot11_auth.lo
-	-rm -f src/dot11/dot11_base.$(OBJEXT)
-	-rm -f src/dot11/dot11_base.lo
-	-rm -f src/dot11/dot11_beacon.$(OBJEXT)
-	-rm -f src/dot11/dot11_beacon.lo
-	-rm -f src/dot11/dot11_control.$(OBJEXT)
-	-rm -f src/dot11/dot11_control.lo
-	-rm -f src/dot11/dot11_data.$(OBJEXT)
-	-rm -f src/dot11/dot11_data.lo
-	-rm -f src/dot11/dot11_mgmt.$(OBJEXT)
-	-rm -f src/dot11/dot11_mgmt.lo
-	-rm -f src/dot11/dot11_probe.$(OBJEXT)
-	-rm -f src/dot11/dot11_probe.lo
-	-rm -f src/dot1q.$(OBJEXT)
-	-rm -f src/dot1q.lo
-	-rm -f src/dot3.$(OBJEXT)
-	-rm -f src/dot3.lo
-	-rm -f src/eapol.$(OBJEXT)
-	-rm -f src/eapol.lo
-	-rm -f src/ethernetII.$(OBJEXT)
-	-rm -f src/ethernetII.lo
-	-rm -f src/handshake_capturer.$(OBJEXT)
-	-rm -f src/handshake_capturer.lo
-	-rm -f src/icmp.$(OBJEXT)
-	-rm -f src/icmp.lo
-	-rm -f src/icmpv6.$(OBJEXT)
-	-rm -f src/icmpv6.lo
-	-rm -f src/internals.$(OBJEXT)
-	-rm -f src/internals.lo
-	-rm -f src/ip.$(OBJEXT)
-	-rm -f src/ip.lo
-	-rm -f src/ip_address.$(OBJEXT)
-	-rm -f src/ip_address.lo
-	-rm -f src/ipv6.$(OBJEXT)
-	-rm -f src/ipv6.lo
-	-rm -f src/ipv6_address.$(OBJEXT)
-	-rm -f src/ipv6_address.lo
-	-rm -f src/llc.$(OBJEXT)
-	-rm -f src/llc.lo
-	-rm -f src/loopback.$(OBJEXT)
-	-rm -f src/loopback.lo
-	-rm -f src/network_interface.$(OBJEXT)
-	-rm -f src/network_interface.lo
-	-rm -f src/packet_sender.$(OBJEXT)
-	-rm -f src/packet_sender.lo
-	-rm -f src/packet_writer.$(OBJEXT)
-	-rm -f src/packet_writer.lo
-	-rm -f src/pdu.$(OBJEXT)
-	-rm -f src/pdu.lo
-	-rm -f src/ppi.$(OBJEXT)
-	-rm -f src/ppi.lo
-	-rm -f src/pppoe.$(OBJEXT)
-	-rm -f src/pppoe.lo
-	-rm -f src/radiotap.$(OBJEXT)
-	-rm -f src/radiotap.lo
-	-rm -f src/rawpdu.$(OBJEXT)
-	-rm -f src/rawpdu.lo
-	-rm -f src/rsn_information.$(OBJEXT)
-	-rm -f src/rsn_information.lo
-	-rm -f src/sll.$(OBJEXT)
-	-rm -f src/sll.lo
-	-rm -f src/snap.$(OBJEXT)
-	-rm -f src/snap.lo
-	-rm -f src/sniffer.$(OBJEXT)
-	-rm -f src/sniffer.lo
-	-rm -f src/stp.$(OBJEXT)
-	-rm -f src/stp.lo
-	-rm -f src/tcp.$(OBJEXT)
-	-rm -f src/tcp.lo
-	-rm -f src/tcp_stream.$(OBJEXT)
-	-rm -f src/tcp_stream.lo
-	-rm -f src/udp.$(OBJEXT)
-	-rm -f src/udp.lo
-	-rm -f src/utils.$(OBJEXT)
-	-rm -f src/utils.lo
 
 distclean-compile:
 	-rm -f *.tab.c
@@ -683,7 +676,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dhcp.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dhcpv6.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dns.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dns_record.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dot1q.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/dot3.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/eapol.Plo@am__quote@
@@ -694,6 +686,8 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/internals.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ip.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ip_address.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ip_reassembler.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ipsec.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ipv6.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/ipv6_address.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/llc.Plo@am__quote@
@@ -725,28 +719,28 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@src/dot11/$(DEPDIR)/dot11_probe.Plo@am__quote@
 
 .cpp.o:
-@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
 @am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
-@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
 @am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
-@am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
 @am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -822,26 +816,15 @@ uninstall-libtins_dot11HEADERS:
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 	dir='$(DESTDIR)$(libtins_dot11dir)'; $(am__uninstall_files_from_dir)
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ID: $(am__tagged_files)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-	unique=`for i in $$list; do \
+tags: tags-am
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+TAGS: tags
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
 
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -853,15 +836,11 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
+ctags: ctags-am
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+
-		$(TAGS_FILES) $(LISP)
+CTAGS: ctags
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	unique=`for i in $$list; do \
+	$(am__define_uniq_tagged_files); \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -870,9 +849,31 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
@@ -915,40 +916,42 @@ distdir: $(DISTFILES)
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-lzip: distdir
 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
 
 dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
+dist dist-all:
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -959,8 +962,6 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.lz*) \
 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
@@ -972,18 +973,19 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod u+w $(distdir)
+	chmod -R a-w $(distdir)
-	mkdir $(distdir)/_build
+	chmod u+w $(distdir)
-	mkdir $(distdir)/_inst
+	mkdir $(distdir)/_build $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && ../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -1006,7 +1008,7 @@ distcheck: dist
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
@@ -1155,23 +1157,23 @@ uninstall-am: uninstall-libLTLIBRARIES uninstall-libtinsHEADERS \
 
 .MAKE: install-am install-strip
 
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
+	clean-cscope clean-generic clean-libLTLIBRARIES clean-libtool \
-	dist-all dist-bzip2 dist-gzip dist-lzip dist-lzma dist-shar \
+	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
-	dist-tarZ dist-xz dist-zip distcheck distclean \
+	dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
-	distclean-compile distclean-generic distclean-hdr \
+	distcheck distclean distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distcleancheck distdir \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
-	install install-am install-data install-data-am install-dvi \
+	info-am install install-am install-data install-data-am \
-	install-dvi-am install-exec install-exec-am install-html \
+	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html-am install-info install-info-am \
+	install-html install-html-am install-info install-info-am \
 	install-libLTLIBRARIES install-libtinsHEADERS \
 	install-libtins_dot11HEADERS install-man install-pdf \
 	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
 	install-strip installcheck installcheck-am installdirs \
 	maintainer-clean maintainer-clean-generic mostlyclean \
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
+	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
 	uninstall-libLTLIBRARIES uninstall-libtinsHEADERS \
 	uninstall-libtins_dot11HEADERS uninstall-pkgconfigDATA
 

README

@@ -1,24 +1,27 @@
 ------------------------------------------------------------------------
-       libtins v1.1
+       libtins v3.0
 ------------------------------------------------------------------------
 
 
 -------------------------------- About ---------------------------------
 
-libtins is a C++ library for crafting, sending, sniffing and 
+libtins is a high-level, multiplatform C++ network packet sniffing and 
-interpreting raw network packets.
+crafting library.
 
 Its main purpose is to provide the C++ developer an easy, efficient, 
 platform and endianess-independent way to create tools which need to 
 send, receive and manipulate specially crafted packets. 
 
-In order to read tutorials, examples and checkout some benchmarks which 
+In order to read tutorials, examples and checkout some benchmarks of the
-show libtins' actual performance, please visit:
+library, please visit:
 
-http://libtins.sourceforge.net 
+http://libtins.github.io/
 
 ------------------------------- Compiling ------------------------------
 
+libtins depends on libpcap and openssl, although the latter is not 
+necessary if some features of the library are disabled.
+
 In order to compile, execute:
 
 ./configure
@@ -32,11 +35,23 @@ like to generate a static library file as well, run:
 The generated static/shared library files will be located in the .libs
 directory.
 
-If you want to enable C++11 features, such as move semantics, use the
+libtins is noticeable faster if you enable C++11 support. Therefore, if
---enable-c++11 switch:
+your compiler supports this standard, then you should enable it. In 
+order to do so, use the --enable-c++11 switch:
 
 ./configure --enable-c++11
 
+If you want to disable WPA2 decryption support, which will remove 
+openssl as a dependency for compilation, use the --disable-wpa2 switch:
+
+./configure --disable-wpa2
+
+If you want to disable IEEE 802.11 support(this will also disable 
+RadioTap and WPA2 decryption), which will reduce the size of the 
+resulting library in around 20%, use the --disable-dot11 switch:
+
+./configure --disable-dot11
+
 ------------------------------ Installing-------------------------------
 
 Once you're done, if you want to install the header files and the 
@@ -55,4 +70,4 @@ ldconfig
 You might want to have a look at the examples located  in the "examples"
 directory. The same samples can be found online at:
 
-http://libtins.sourceforge.net/index.php?page=examples
+http://libtins.github.io/examples/

README.md

@@ -0,0 +1,93 @@
+libtins
+=======
+
+libtins is a high-level, multiplatform C++ network packet sniffing and 
+crafting library. 
+
+Its main purpose is to provide the C++ developer an easy, efficient, 
+platform and endianess-independent way to create tools which need to 
+send, receive and manipulate specially crafted packets. 
+
+In order to read tutorials, examples and checkout some benchmarks of the
+library, please visit:
+
+http://libtins.github.io/
+
+## Compiling ##
+
+[libtins](http://libtins.github.io/) depends on 
+[libpcap](http://www.tcpdump.org/) and 
+[openssl](http://www.openssl.org/), although the latter is not necessary 
+if some features of the library are disabled.
+
+In order to compile, execute:
+
+```Shell
+# Create the build directory
+mkdir build
+cd build
+
+# Configure the project. Add any relevant configuration flags
+cmake ../
+
+# Compile!
+make
+```
+
+Note that by default, only the shared object is compiled. If you would
+like to generate a static library file, run:
+
+```Shell
+cmake ../ -DLIBTINS_BUILD_SHARED=0
+```
+
+The generated static/shared library files will be located in the 
+_build/lib_ directory.
+
+libtins is noticeable faster if you enable _C++11_ support. Therefore, 
+if your compiler supports this standard, then you should enable it. 
+In order to do so, use the _LIBTINS_ENABLE_CXX11_ switch:
+
+```Shell
+cmake ../ -DLIBTINS_ENABLE_CXX11=1
+```
+
+If you want to disable _WPA2_ decryption support, which will remove 
+openssl as a dependency for compilation, use the 
+_LIBTINS_ENABLE_WPA2_ switch:
+
+```Shell
+cmake ../ -DLIBTINS_ENABLE_WPA2=0
+```
+
+If you want to disable IEEE 802.11 support(this will also disable 
+RadioTap and WPA2 decryption), which will reduce the size of the 
+resulting library in around 20%, use the _LIBTINS_ENABLE_DOT11_ switch:
+
+```Shell
+cmake ../ -DLIBTINS_ENABLE_DOT11=0
+```
+
+## Installing ##
+
+Once you're done, if you want to install the header files and the 
+shared object, execute as root:
+
+```Shell
+make install
+```
+
+This will install the shared object typically in _/usr/local/lib_. Note
+that you might have to update ldconfig's cache before using it, so 
+in order to invalidate it, you should run(as root):
+
+```Shell
+ldconfig
+```
+
+## Examples ##
+
+You might want to have a look at the examples located  in the "examples"
+directory. The same samples can be found online at:
+
+http://libtins.github.io/examples/

cmake/Modules/CheckCXX11Features.cmake

@@ -0,0 +1,142 @@
+# - Check which parts of the C++11 standard the compiler supports
+#
+# When found it will set the following variables
+#
+#  CXX11_COMPILER_FLAGS         - the compiler flags needed to get C++11 features
+#
+#  HAS_CXX11_AUTO               - auto keyword
+#  HAS_CXX11_AUTO_RET_TYPE      - function declaration with deduced return types
+#  HAS_CXX11_CLASS_OVERRIDE     - override and final keywords for classes and methods
+#  HAS_CXX11_CONSTEXPR          - constexpr keyword
+#  HAS_CXX11_CSTDINT_H          - cstdint header
+#  HAS_CXX11_DECLTYPE           - decltype keyword
+#  HAS_CXX11_FUNC               - __func__ preprocessor constant
+#  HAS_CXX11_INITIALIZER_LIST   - initializer list
+#  HAS_CXX11_LAMBDA             - lambdas
+#  HAS_CXX11_LIB_REGEX          - regex library
+#  HAS_CXX11_LONG_LONG          - long long signed & unsigned types
+#  HAS_CXX11_NULLPTR            - nullptr
+#  HAS_CXX11_RVALUE_REFERENCES  - rvalue references
+#  HAS_CXX11_SIZEOF_MEMBER      - sizeof() non-static members
+#  HAS_CXX11_STATIC_ASSERT      - static_assert()
+#  HAS_CXX11_VARIADIC_TEMPLATES - variadic templates
+
+#=============================================================================
+# Copyright 2011,2012 Rolf Eike Beer <eike@sf-mail.de>
+# Copyright 2012 Andreas Weis
+#
+# Distributed under the OSI-approved BSD License (the "License");
+# see accompanying file Copyright.txt for details.
+#
+# This software is distributed WITHOUT ANY WARRANTY; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the License for more information.
+#=============================================================================
+# (To distribute this file outside of CMake, substitute the full
+#  License text for the above reference.)
+
+#
+# Each feature may have up to 3 checks, every one of them in it's own file
+# FEATURE.cpp              - example that must build and return 0 when run
+# FEATURE_fail.cpp         - example that must build, but may not return 0 when run
+# FEATURE_fail_compile.cpp - example that must fail compilation
+#
+# The first one is mandatory, the latter 2 are optional and do not depend on
+# each other (i.e. only one may be present).
+#
+
+if (NOT CMAKE_CXX_COMPILER_LOADED)
+    message(FATAL_ERROR "CheckCXX11Features modules only works if language CXX is enabled")
+endif ()
+
+cmake_minimum_required(VERSION 2.8.3)
+
+#
+### Check for needed compiler flags
+#
+include(CheckCXXCompilerFlag)
+check_cxx_compiler_flag("-std=c++11" _HAS_CXX11_FLAG)
+if (NOT _HAS_CXX11_FLAG)
+    check_cxx_compiler_flag("-std=c++0x" _HAS_CXX0X_FLAG)
+endif ()
+
+if (_HAS_CXX11_FLAG)
+    set(CXX11_COMPILER_FLAGS "-std=c++11")
+elseif (_HAS_CXX0X_FLAG)
+    set(CXX11_COMPILER_FLAGS "-std=c++0x")
+endif ()
+
+function(cxx11_check_feature FEATURE_NAME RESULT_VAR)
+    if (NOT DEFINED ${RESULT_VAR})
+        set(_bindir "${CMAKE_CURRENT_BINARY_DIR}/cxx11_${FEATURE_NAME}")
+
+        set(_SRCFILE_BASE ${CMAKE_CURRENT_LIST_DIR}/CheckCXX11Features/cxx11-test-${FEATURE_NAME})
+        set(_LOG_NAME "\"${FEATURE_NAME}\"")
+        message(STATUS "Checking C++11 support for ${_LOG_NAME}")
+
+        set(_SRCFILE "${_SRCFILE_BASE}.cpp")
+        set(_SRCFILE_FAIL "${_SRCFILE_BASE}_fail.cpp")
+        set(_SRCFILE_FAIL_COMPILE "${_SRCFILE_BASE}_fail_compile.cpp")
+
+        if (CROSS_COMPILING)
+            try_compile(${RESULT_VAR} "${_bindir}" "${_SRCFILE}"
+                        COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+            if (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL})
+                try_compile(${RESULT_VAR} "${_bindir}_fail" "${_SRCFILE_FAIL}"
+                            COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+            endif (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL})
+        else (CROSS_COMPILING)
+            try_run(_RUN_RESULT_VAR _COMPILE_RESULT_VAR
+                    "${_bindir}" "${_SRCFILE}"
+                    COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+            if (_COMPILE_RESULT_VAR AND NOT _RUN_RESULT_VAR)
+                set(${RESULT_VAR} TRUE)
+            else (_COMPILE_RESULT_VAR AND NOT _RUN_RESULT_VAR)
+                set(${RESULT_VAR} FALSE)
+            endif (_COMPILE_RESULT_VAR AND NOT _RUN_RESULT_VAR)
+            if (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL})
+                try_run(_RUN_RESULT_VAR _COMPILE_RESULT_VAR
+                        "${_bindir}_fail" "${_SRCFILE_FAIL}"
+                         COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+                if (_COMPILE_RESULT_VAR AND _RUN_RESULT_VAR)
+                    set(${RESULT_VAR} TRUE)
+                else (_COMPILE_RESULT_VAR AND _RUN_RESULT_VAR)
+                    set(${RESULT_VAR} FALSE)
+                endif (_COMPILE_RESULT_VAR AND _RUN_RESULT_VAR)
+            endif (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL})
+        endif (CROSS_COMPILING)
+        if (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL_COMPILE})
+            try_compile(_TMP_RESULT "${_bindir}_fail_compile" "${_SRCFILE_FAIL_COMPILE}"
+                        COMPILE_DEFINITIONS "${CXX11_COMPILER_FLAGS}")
+            if (_TMP_RESULT)
+                set(${RESULT_VAR} FALSE)
+            else (_TMP_RESULT)
+                set(${RESULT_VAR} TRUE)
+            endif (_TMP_RESULT)
+        endif (${RESULT_VAR} AND EXISTS ${_SRCFILE_FAIL_COMPILE})
+
+        if (${RESULT_VAR})
+            message(STATUS "Checking C++11 support for ${_LOG_NAME}: works")
+        else (${RESULT_VAR})
+            message(STATUS "Checking C++11 support for ${_LOG_NAME}: not supported")
+        endif (${RESULT_VAR})
+        set(${RESULT_VAR} ${${RESULT_VAR}} CACHE INTERNAL "C++11 support for ${_LOG_NAME}")
+    endif (NOT DEFINED ${RESULT_VAR})
+endfunction(cxx11_check_feature)
+
+cxx11_check_feature("__func__" HAS_CXX11_FUNC)
+cxx11_check_feature("auto" HAS_CXX11_AUTO)
+cxx11_check_feature("auto_ret_type" HAS_CXX11_AUTO_RET_TYPE)
+cxx11_check_feature("class_override_final" HAS_CXX11_CLASS_OVERRIDE)
+cxx11_check_feature("constexpr" HAS_CXX11_CONSTEXPR)
+cxx11_check_feature("cstdint" HAS_CXX11_CSTDINT_H)
+cxx11_check_feature("decltype" HAS_CXX11_DECLTYPE)
+cxx11_check_feature("initializer_list" HAS_CXX11_INITIALIZER_LIST)
+cxx11_check_feature("lambda" HAS_CXX11_LAMBDA)
+cxx11_check_feature("long_long" HAS_CXX11_LONG_LONG)
+cxx11_check_feature("nullptr" HAS_CXX11_NULLPTR)
+cxx11_check_feature("regex" HAS_CXX11_LIB_REGEX)
+cxx11_check_feature("rvalue-references" HAS_CXX11_RVALUE_REFERENCES)
+cxx11_check_feature("sizeof_member" HAS_CXX11_SIZEOF_MEMBER)
+cxx11_check_feature("static_assert" HAS_CXX11_STATIC_ASSERT)
+cxx11_check_feature("variadic_templates" HAS_CXX11_VARIADIC_TEMPLATES)

cmake/Modules/CheckCXX11Features/cxx11-test-__func__.cpp

@@ -0,0 +1,8 @@
+int main(void)
+{
+	if (!__func__)
+		return 1;
+	if (!(*__func__))
+		return 1;
+	return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-auto.cpp

@@ -0,0 +1,12 @@
+
+int main()
+{
+	auto i = 5;
+	auto f = 3.14159f;
+	auto d = 3.14159;
+	bool ret = (
+		(sizeof(f) < sizeof(d)) &&
+		(sizeof(i) == sizeof(int))
+	);
+	return ret ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-auto_fail_compile.cpp

@@ -0,0 +1,7 @@
+int main(void)
+{
+	// must fail because there is no initializer
+	auto i;
+
+	return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-auto_ret_type.cpp

@@ -0,0 +1,8 @@
+auto foo(int i) -> int {
+	return i - 1;
+}
+
+int main()
+{
+	return foo(1);
+}

cmake/Modules/CheckCXX11Features/cxx11-test-class_override_final.cpp

@@ -0,0 +1,21 @@
+class base {
+public:
+    virtual int foo(int a)
+     { return 4 + a; }
+    int bar(int a) final
+     { return a - 2; }
+};
+
+class sub final : public base {
+public:
+    virtual int foo(int a) override
+     { return 8 + 2 * a; };
+};
+
+int main(void)
+{
+    base b;
+    sub s;
+
+    return (b.foo(2) * 2 == s.foo(2)) ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-class_override_final_fail_compile.cpp

@@ -0,0 +1,25 @@
+class base {
+public:
+    virtual int foo(int a)
+     { return 4 + a; }
+    virtual int bar(int a) final
+     { return a - 2; }
+};
+
+class sub final : public base {
+public:
+    virtual int foo(int a) override
+     { return 8 + 2 * a; };
+    virtual int bar(int a)
+     { return a; }
+};
+
+class impossible : public sub { };
+
+int main(void)
+{
+    base b;
+    sub s;
+
+    return 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-constexpr.cpp

@@ -0,0 +1,19 @@
+constexpr int square(int x)
+{
+	return x*x;
+}
+
+constexpr int the_answer()
+{
+	return 42;
+}
+
+int main()
+{
+	int test_arr[square(3)];
+	bool ret = (
+		(square(the_answer()) == 1764) &&
+		(sizeof(test_arr)/sizeof(test_arr[0]) == 9)
+	);
+	return ret ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-cstdint.cpp

@@ -0,0 +1,11 @@
+#include <cstdint>
+
+int main()
+{
+	bool test =
+		(sizeof(int8_t) == 1) &&
+		(sizeof(int16_t) == 2) &&
+		(sizeof(int32_t) == 4) &&
+		(sizeof(int64_t) == 8);
+	return test ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-decltype.cpp

@@ -0,0 +1,10 @@
+bool check_size(int i)
+{
+	return sizeof(int) == sizeof(decltype(i));
+}
+
+int main()
+{
+	bool ret = check_size(42);
+	return ret ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-initializer_list.cpp

@@ -0,0 +1,27 @@
+#include <vector>
+
+class seq {
+public:
+    seq(std::initializer_list<int> list);
+
+    int length() const;
+private:
+    std::vector<int> m_v;
+};
+
+seq::seq(std::initializer_list<int> list)
+    : m_v(list)
+{
+}
+
+int seq::length() const
+{
+    return m_v.size();
+}
+
+int main(void)
+{
+    seq a = {18, 20, 2, 0, 4, 7};
+
+    return (a.length() == 6) ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-lambda.cpp

@@ -0,0 +1,5 @@
+int main()
+{
+	int ret = 0;
+	return ([&ret]() -> int { return ret; })();
+}

cmake/Modules/CheckCXX11Features/cxx11-test-long_long.cpp

@@ -0,0 +1,7 @@
+int main(void)
+{
+	long long l;
+	unsigned long long ul;
+
+	return ((sizeof(l) >= 8) && (sizeof(ul) >= 8)) ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-nullptr.cpp

@@ -0,0 +1,6 @@
+int main(void)
+{
+	void *v = nullptr;
+
+	return v ? 1 : 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-nullptr_fail_compile.cpp

@@ -0,0 +1,6 @@
+int main(void)
+{
+	int i = nullptr;
+
+	return 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-regex.cpp

@@ -0,0 +1,26 @@
+#include <algorithm>
+#include <regex>
+
+int parse_line(std::string const& line)
+{
+	std::string tmp;
+	if(std::regex_search(line, std::regex("(\\s)+(-)?(\\d)+//(-)?(\\d)+(\\s)+"))) {
+		tmp = std::regex_replace(line, std::regex("(-)?(\\d)+//(-)?(\\d)+"), std::string("V"));
+	} else if(std::regex_search(line, std::regex("(\\s)+(-)?(\\d)+/(-)?(\\d)+(\\s)+"))) {
+		tmp = std::regex_replace(line, std::regex("(-)?(\\d)+/(-)?(\\d)+"), std::string("V"));
+	} else if(std::regex_search(line, std::regex("(\\s)+(-)?(\\d)+/(-)?(\\d)+/(-)?(\\d)+(\\s)+"))) {
+		tmp = std::regex_replace(line, std::regex("(-)?(\\d)+/(-)?(\\d)+/(-)?(\\d)+"), std::string("V"));
+	} else {
+		tmp = std::regex_replace(line, std::regex("(-)?(\\d)+"), std::string("V"));
+	}
+	return static_cast<int>(std::count(tmp.begin(), tmp.end(), 'V'));
+}
+
+int main()
+{
+	bool test = (parse_line("f 7/7/7 -3/3/-3 2/-2/2") == 3) &&
+				(parse_line("f 7//7 3//-3 -2//2") == 3) &&
+				(parse_line("f 7/7 3/-3 -2/2") == 3) &&
+				(parse_line("f 7 3 -2") == 3);
+	return test ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-rvalue-references.cpp

@@ -0,0 +1,57 @@
+#include <cassert>
+
+class rvmove {
+public:
+   void *ptr;
+   char *array;
+
+   rvmove()
+    : ptr(0),
+    array(new char[10])
+   {
+     ptr = this;
+   }
+
+   rvmove(rvmove &&other)
+    : ptr(other.ptr),
+    array(other.array)
+   {
+    other.array = 0;
+    other.ptr = 0;
+   }
+
+   ~rvmove()
+   {
+    assert(((ptr != 0) && (array != 0)) || ((ptr == 0) && (array == 0)));
+    delete[] array;
+   }
+
+   rvmove &operator=(rvmove &&other)
+   {
+     delete[] array;
+     ptr = other.ptr;
+     array = other.array;
+     other.array = 0;
+     other.ptr = 0;
+     return *this;
+   }
+
+   static rvmove create()
+   {
+     return rvmove();
+   }
+private:
+  rvmove(const rvmove &);
+  rvmove &operator=(const rvmove &);
+};
+
+int main()
+{
+  rvmove mine;
+  if (mine.ptr != &mine)
+    return 1;
+  mine = rvmove::create();
+  if (mine.ptr == &mine)
+    return 1;
+  return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-sizeof_member.cpp

@@ -0,0 +1,14 @@
+struct foo {
+	char bar;
+	int baz;
+};
+
+int main(void)
+{
+	bool ret = (
+		(sizeof(foo::bar) == 1) &&
+		(sizeof(foo::baz) >= sizeof(foo::bar)) &&
+		(sizeof(foo) >= sizeof(foo::bar) + sizeof(foo::baz))
+	);
+	return ret ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-sizeof_member_fail.cpp

@@ -0,0 +1,9 @@
+struct foo {
+	int baz;
+	double bar;
+};
+
+int main(void)
+{
+	return (sizeof(foo::bar) == 4) ? 0 : 1;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-static_assert.cpp

@@ -0,0 +1,5 @@
+int main(void)
+{
+	static_assert(0 < 1, "your ordering of integers is screwed");
+	return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-static_assert_fail_compile.cpp

@@ -0,0 +1,5 @@
+int main(void)
+{
+	static_assert(1 < 0, "your ordering of integers is screwed");
+	return 0;
+}

cmake/Modules/CheckCXX11Features/cxx11-test-variadic_templates.cpp

@@ -0,0 +1,23 @@
+int Accumulate()
+{
+	return 0;
+}
+
+template<typename T, typename... Ts>
+int Accumulate(T v, Ts... vs)
+{
+	return v + Accumulate(vs...);
+}
+
+template<int... Is>
+int CountElements()
+{
+	return sizeof...(Is);
+}
+
+int main()
+{
+	int acc = Accumulate(1, 2, 3, 4, -5);
+	int count = CountElements<1,2,3,4,5>();
+	return ((acc == 5) && (count == 5)) ? 0 : 1;
+}

cmake/Modules/FindPCAP.cmake

@@ -0,0 +1,74 @@
+# - Try to find libpcap include dirs and libraries
+#
+# Usage of this module as follows:
+#
+#     find_package(PCAP)
+#
+# Variables used by this module, they can change the default behaviour and need
+# to be set before calling find_package:
+#
+#  PCAP_ROOT_DIR             Set this variable to the root installation of
+#                            libpcap if the module has problems finding the
+#                            proper installation path.
+#
+# Variables defined by this module:
+#
+#  PCAP_FOUND                System has libpcap, include and library dirs found
+#  PCAP_INCLUDE_DIR          The libpcap include directories.
+#  PCAP_LIBRARY              The libpcap library (possibly includes a thread
+#                            library e.g. required by pf_ring's libpcap)
+#  HAVE_PF_RING              If a found version of libpcap supports PF_RING
+
+find_path(PCAP_ROOT_DIR
+    NAMES include/pcap.h
+)
+
+find_path(PCAP_INCLUDE_DIR
+    NAMES pcap.h
+    HINTS ${PCAP_ROOT_DIR}/include
+)
+
+find_library(PCAP_LIBRARY
+    NAMES pcap wpcap
+    HINTS ${PCAP_ROOT_DIR}/lib
+)
+
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(PCAP DEFAULT_MSG
+    PCAP_LIBRARY
+    PCAP_INCLUDE_DIR
+)
+
+include(CheckCXXSourceCompiles)
+set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LIBRARY})
+check_cxx_source_compiles("int main() { return 0; }" PCAP_LINKS_SOLO)
+set(CMAKE_REQUIRED_LIBRARIES)
+
+# check if linking against libpcap also needs to link against a thread library
+if (NOT PCAP_LINKS_SOLO)
+    find_package(Threads)
+    if (THREADS_FOUND)
+        set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LIBRARY} ${CMAKE_THREAD_LIBS_INIT})
+        check_cxx_source_compiles("int main() { return 0; }" PCAP_NEEDS_THREADS)
+        set(CMAKE_REQUIRED_LIBRARIES)
+    endif (THREADS_FOUND)
+    if (THREADS_FOUND AND PCAP_NEEDS_THREADS)
+        set(_tmp ${PCAP_LIBRARY} ${CMAKE_THREAD_LIBS_INIT})
+        list(REMOVE_DUPLICATES _tmp)
+        set(PCAP_LIBRARY ${_tmp}
+            CACHE STRING "Libraries needed to link against libpcap" FORCE)
+    else (THREADS_FOUND AND PCAP_NEEDS_THREADS)
+        message(FATAL_ERROR "Couldn't determine how to link against libpcap")
+    endif (THREADS_FOUND AND PCAP_NEEDS_THREADS)
+endif (NOT PCAP_LINKS_SOLO)
+
+include(CheckFunctionExists)
+set(CMAKE_REQUIRED_LIBRARIES ${PCAP_LIBRARY})
+check_function_exists(pcap_get_pfring_id HAVE_PF_RING)
+set(CMAKE_REQUIRED_LIBRARIES)
+
+mark_as_advanced(
+    PCAP_ROOT_DIR
+    PCAP_INCLUDE_DIR
+    PCAP_LIBRARY
+)

compile

@@ -0,0 +1 @@
+/usr/share/automake-1.14/compile

configure

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for libtins 1.2.
+# Generated by GNU Autoconf 2.69 for libtins 3.0.
 #
 # Report bugs to <matias.fontanini@gmail.com>.
 #
@@ -590,8 +590,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='libtins'
 PACKAGE_TARNAME='libtins'
-PACKAGE_VERSION='1.2'
+PACKAGE_VERSION='3.0'
-PACKAGE_STRING='libtins 1.2'
+PACKAGE_STRING='libtins 3.0'
 PACKAGE_BUGREPORT='matias.fontanini@gmail.com'
 PACKAGE_URL='http://libtins.sourceforge.net'
 
@@ -687,6 +687,10 @@ LDFLAGS
 CFLAGS
 CC
 LIBTOOL
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
 am__untar
 am__tar
 AMTAR
@@ -763,6 +767,7 @@ SHELL'
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
+enable_silent_rules
 enable_static
 enable_shared
 with_pic
@@ -775,6 +780,7 @@ enable_maintainer_mode
 with_pcap_include_path
 with_pcap_lib_path
 enable_c__11
+enable_dot11
 enable_wpa2
 '
       ac_precious_vars='build_alias
@@ -1330,7 +1336,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libtins 1.2 to adapt to many kinds of systems.
+\`configure' configures libtins 3.0 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1401,7 +1407,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libtins 1.2:";;
+     short | recursive ) echo "Configuration of libtins 3.0:";;
    esac
   cat <<\_ACEOF
 
@@ -1409,16 +1415,22 @@ Optional Features:
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
   --enable-static[=PKGS]  build static libraries [default=no]
   --enable-shared[=PKGS]  build shared libraries [default=yes]
   --enable-fast-install[=PKGS]
                           optimize for fast installation [default=yes]
-  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking
-  --enable-dependency-tracking   do not reject slow dependency extractors
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
   --disable-libtool-lock  avoid locking (might break parallel builds)
-  --disable-maintainer-mode  disable make rules and dependencies not useful
+  --enable-maintainer-mode
-			  (and sometimes confusing) to the casual installer
+                          enable make rules and dependencies not useful (and
+                          sometimes confusing) to the casual installer
   --enable-c++11          enable C++11 features
+  --disable-dot11         disable IEEE 802.11 support
   --disable-wpa2          disable WPA2 decryption features
 
 Optional Packages:
@@ -1514,7 +1526,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libtins configure 1.2
+libtins configure 3.0
 generated by GNU Autoconf 2.69
 
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2004,7 +2016,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libtins $as_me 1.2, which was
+It was created by libtins $as_me 3.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
@@ -2494,7 +2506,7 @@ test -n "$target_alias" &&
 
 ac_config_headers="$ac_config_headers include/config.h"
 
-am__api_version='1.11'
+am__api_version='1.14'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -2591,9 +2603,6 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -2604,32 +2613,40 @@ case `pwd` in
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   am_has_slept=no
-   if test "$*" = "X"; then
+   for am_try in 1 2; do
-      # -L didn't work.
+     echo "timestamp, slept: $am_has_slept" > conftest.file
-      set X `ls -t "$srcdir/configure" conftest.file`
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   fi
+     if test "$*" = "X"; then
-   rm -f conftest.file
+	# -L didn't work.
-   if test "$*" != "X $srcdir/configure conftest.file" \
+	set X `ls -t "$srcdir/configure" conftest.file`
-      && test "$*" != "X conftest.file $srcdir/configure"; then
+     fi
-
+     if test "$*" != "X $srcdir/configure conftest.file" \
-      # If neither matched, then we have a broken ls.  This can happen
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
-   fi
 
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$2" = conftest.file
    )
 then
@@ -2641,6 +2658,16 @@ Check your system clock" "$LINENO" 5
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
@@ -2663,12 +2690,12 @@ if test x"${MISSING+set}" != xset; then
   esac
 fi
 # Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
+if eval "$MISSING --is-lightweight"; then
-  am_missing_run="$MISSING --run "
+  am_missing_run="$MISSING "
 else
   am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
 if test x"${install_sh}" != xset; then
@@ -2680,10 +2707,10 @@ if test x"${install_sh}" != xset; then
   esac
 fi
 
-# Installed binaries are usually stripped using `strip' when the user
+# Installed binaries are usually stripped using 'strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -2822,12 +2849,6 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  [\\/$]* | ?:[\\/]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -2910,6 +2931,45 @@ else
 fi
 rmdir .tst 2>/dev/null
 
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
 if test "`cd $srcdir && pwd`" != "`pwd`"; then
   # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
   # is not polluted with repeated "-I."
@@ -2932,7 +2992,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='libtins'
- VERSION='1.2'
+ VERSION='3.0'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2960,18 +3020,70 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AMTAR='$${TAR-tar}'
 
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
+
 am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
 
 
 
 
 
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
 case `pwd` in
   *\ * | *\	*)
     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
@@ -3085,7 +3197,7 @@ am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -3918,6 +4030,65 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
 depcc="$CC"   am_compiler_list=
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
@@ -3929,8 +4100,8 @@ else
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
+  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D'.
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -3965,16 +4136,16 @@ else
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
+      # Solaris 10 /bin/sh.
-      touch sub/conftst$i.h
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -3983,8 +4154,8 @@ else
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
+      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -3992,7 +4163,7 @@ else
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -11486,7 +11657,7 @@ $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles
 if test "${enable_maintainer_mode+set}" = set; then :
   enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 else
-  USE_MAINTAINER_MODE=yes
+  USE_MAINTAINER_MODE=no
 fi
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
@@ -11771,8 +11942,8 @@ else
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
+  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D'.
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -11807,16 +11978,16 @@ else
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
+      # Solaris 10 /bin/sh.
-      touch sub/conftst$i.h
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -11825,8 +11996,8 @@ else
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
+      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -11834,7 +12005,7 @@ else
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -15331,12 +15502,22 @@ $as_echo "#define HAVE_CXX11 1" >>confdefs.h
 fi
 
 
-# Check whether --enable-wpa2 was given.
+# Check whether --enable-dot11 was given.
+if test "${enable_dot11+set}" = set; then :
+  enableval=$enable_dot11;
+else
+
+
+$as_echo "#define HAVE_DOT11 1" >>confdefs.h
+
+
+        # Only allow enabling WPA2 if Dot11 is enabled.
+        # Check whether --enable-wpa2 was given.
 if test "${enable_wpa2+set}" = set; then :
   enableval=$enable_wpa2;
 else
 
-        for ac_header in openssl/evp.h openssl/hmac.h openssl/aes.h
+                for ac_header in openssl/evp.h openssl/hmac.h openssl/aes.h
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
@@ -15355,7 +15536,7 @@ fi
 
 done
 
-        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PKCS5_PBKDF2_HMAC_SHA1 in -lcrypto" >&5
+                { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PKCS5_PBKDF2_HMAC_SHA1 in -lcrypto" >&5
 $as_echo_n "checking for PKCS5_PBKDF2_HMAC_SHA1 in -lcrypto... " >&6; }
 if ${ac_cv_lib_crypto_PKCS5_PBKDF2_HMAC_SHA1+:} false; then :
   $as_echo_n "(cached) " >&6
@@ -15408,6 +15589,10 @@ $as_echo "#define HAVE_WPA2_DECRYPTION 1" >>confdefs.h
 
 
 
+fi
+
+
+
 fi
 
 
@@ -15416,7 +15601,7 @@ fi
 
 
 
-LIBTINS_VERSION=1:1:0
+LIBTINS_VERSION=3:0:0
 
 ac_config_files="$ac_config_files Makefile libtins.pc"
 
@@ -15529,6 +15714,14 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
@@ -15950,7 +16143,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libtins $as_me 1.2, which was
+This file was extended by libtins $as_me 3.0, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -16017,7 +16210,7 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-libtins config.status 1.2
+libtins config.status 3.0
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
@@ -17122,7 +17315,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
 
   case $ac_file$ac_mode in
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.
   case $CONFIG_FILES in
@@ -17135,7 +17328,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -17169,21 +17362,19 @@ $as_echo X"$mf" |
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
+    test -z "$am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||

configure.ac

@@ -1,10 +1,10 @@
-AC_INIT([libtins], [1.2], [matias.fontanini@gmail.com], [libtins], [http://libtins.sourceforge.net])
+AC_INIT([libtins], [3.0], [matias.fontanini@gmail.com], [libtins], [http://libtins.sourceforge.net])
 AC_CANONICAL_SYSTEM
 AC_CONFIG_HEADER(include/config.h)
 AM_INIT_AUTOMAKE([-Wall -Werror -Wno-extra-portability foreign])
 LT_INIT([disable-static])
 AC_CONFIG_MACRO_DIR([m4])
-AM_MAINTAINER_MODE([enable])
+AM_MAINTAINER_MODE([disable])
 
 AC_PROG_CXX
 AC_LANG(C++)
@@ -45,23 +45,33 @@ AC_ARG_ENABLE(
 )
 
 AC_ARG_ENABLE(
-    wpa2, 
+    dot11, 
-    [  --disable-wpa2          disable WPA2 decryption features], 
+    [  --disable-dot11         disable IEEE 802.11 support], 
     [],
     [
-        AC_CHECK_HEADERS(
+        AC_DEFINE([HAVE_DOT11], 1, Have IEEE 802.11 support)
-            [openssl/evp.h openssl/hmac.h openssl/aes.h], 
+
+        # Only allow enabling WPA2 if Dot11 is enabled.
+        AC_ARG_ENABLE(
+            wpa2, 
+            [  --disable-wpa2          disable WPA2 decryption features], 
             [],
-            [AC_MSG_ERROR([openssl headers are missing! $wpa2_msg ])]
+            [
-            AC_DEFINE([HAVE_WPA2_DECRYPTION], 0, Have WPA2 decryption library)
+                AC_CHECK_HEADERS(
+                    [openssl/evp.h openssl/hmac.h openssl/aes.h], 
+                    [], 
+                    [AC_MSG_ERROR([openssl headers are missing! $wpa2_msg ])]
+                    AC_DEFINE([HAVE_WPA2_DECRYPTION], 0, Have WPA2 decryption library)
+                )
+                AC_CHECK_LIB(
+                    crypto, 
+                    PKCS5_PBKDF2_HMAC_SHA1, 
+                    [], 
+                    [AC_MSG_ERROR([openssl library is missing! $wpa2_msg ])]
+                )
+                AC_DEFINE([HAVE_WPA2_DECRYPTION], 1, Have WPA2 decryption library)
+            ]
         )
-        AC_CHECK_LIB(
-            crypto, 
-            PKCS5_PBKDF2_HMAC_SHA1, 
-            [], 
-            [AC_MSG_ERROR([openssl library is missing! $wpa2_msg ])]
-        )
-        AC_DEFINE([HAVE_WPA2_DECRYPTION], 1, Have WPA2 decryption library)
     ]
 )
 
@@ -70,6 +80,6 @@ AC_ARG_ENABLE(
 AC_SUBST(CXXFLAGS)
 AC_SUBST(LIBS)
 AC_SUBST(LIBTINS_INCLUDE_DIR)
-AC_SUBST([LIBTINS_VERSION], [1:1:0])
+AC_SUBST([LIBTINS_VERSION], [3:0:0])
 AC_CONFIG_FILES([Makefile libtins.pc])
 AC_OUTPUT

examples/CMakeLists.txt

@@ -0,0 +1,56 @@
+FIND_PACKAGE(libtins QUIET)
+FIND_PACKAGE(Threads QUIET)
+
+IF(libtins_FOUND)
+    SET(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/examples)
+    INCLUDE_DIRECTORIES(${LIBTINS_INCLUDE_DIRS})
+    LINK_LIBRARIES(${LIBTINS_LIBRARIES})
+
+    IF(HAVE_CXX11)
+        SET(LIBTINS_CXX11_EXAMPLES
+            arpmonitor
+            dns_queries
+            dns_spoof
+            dns_stats
+            wps_detect
+        )
+    ELSE(HAVE_CXX11)
+        MESSAGE(WARNING "Disabling some examples since C++11 support is disabled.")
+    ENDIF(HAVE_CXX11)
+
+    ADD_CUSTOM_TARGET(
+        examples DEPENDS
+        arpspoofing
+        ${LIBTINS_CXX11_EXAMPLES}
+        beacon_display
+        portscan
+        traceroute
+    )
+
+    ADD_EXECUTABLE(arpspoofing EXCLUDE_FROM_ALL arpspoofing.cpp)
+    IF(HAVE_CXX11)
+        ADD_EXECUTABLE(arpmonitor EXCLUDE_FROM_ALL arpmonitor.cpp)
+        ADD_EXECUTABLE(dns_queries EXCLUDE_FROM_ALL dns_queries.cpp)
+        ADD_EXECUTABLE(dns_spoof EXCLUDE_FROM_ALL dns_spoof.cpp)
+        ADD_EXECUTABLE(dns_stats EXCLUDE_FROM_ALL dns_stats.cpp)
+        ADD_EXECUTABLE(wps_detect EXCLUDE_FROM_ALL wps_detect.cpp)
+    ENDIF(HAVE_CXX11)
+
+    ADD_EXECUTABLE(beacon_display EXCLUDE_FROM_ALL beacon_display.cpp)
+
+    if(THREADS_FOUND)
+        ADD_EXECUTABLE(portscan EXCLUDE_FROM_ALL portscan.cpp)
+        ADD_EXECUTABLE(traceroute EXCLUDE_FROM_ALL traceroute.cpp)
+        
+        TARGET_LINK_LIBRARIES(portscan ${CMAKE_THREAD_LIBS_INIT})
+        TARGET_LINK_LIBRARIES(traceroute ${CMAKE_THREAD_LIBS_INIT})
+    ELSE(THREADS_FOUND)
+        MESSAGE(WARNING "Disabling portscan and traceroute examples since pthreads library was not found.")
+    ENDIF(THREADS_FOUND)
+ELSE(libtins_FOUND)
+    MESSAGE(
+        WARNING 
+        "Disabling examples since libtins is not installed. "
+        "Run cmake again once it is installed in order to compile them."
+    )
+ENDIF(libtins_FOUND)

examples/Makefile.in

@@ -1,7 +1,7 @@
 CXX=@CXX@
 CXXFLAGS=-Wall @CXXFLAGS@
 LDFLAGS=-ltins
-EXECUTABLES=arpspoof portscan traceroute beacon_display
+EXECUTABLES=arpspoofing arpmonitor portscan traceroute beacon_display dns_queries dns_spoof dns_stats wps_detect
 
 all: $(EXECUTABLES)
 
@@ -9,12 +9,27 @@ compile: $(OBJECTS)
 
 recompile: clean all
 
-arpspoof: 
+arpspoofing: 
 	$(CXX) arpspoofing.cpp -o arpspoofing $(CXXFLAGS) $(LDFLAGS)
 
+arpmonitor: 
+	$(CXX) arpmonitor.cpp -o arpmonitor -std=c++0x $(CXXFLAGS) $(LDFLAGS)
+
+dns_queries: 
+	$(CXX) dns_queries.cpp -o dns_queries -std=c++0x  $(CXXFLAGS) $(LDFLAGS)
+
+dns_spoof: 
+	$(CXX) dns_spoof.cpp -o dns_spoof -std=c++0x  $(CXXFLAGS) $(LDFLAGS)
+
+dns_stats: 
+	$(CXX) dns_stats.cpp -o dns_stats -std=c++0x $(CXXFLAGS) $(LDFLAGS) -lpthread 
+
 beacon_display: 
 	$(CXX) beacon_display.cpp -o beacon_display $(CXXFLAGS) $(LDFLAGS) 	
 	
+wps_detect: 
+	$(CXX) wps_detect.cpp -o wps_detect -std=c++0x  $(CXXFLAGS) $(LDFLAGS)
+
 portscan:
 	$(CXX) portscan.cpp -o portscan $(CXXFLAGS) $(LDFLAGS) -lpthread
 	

examples/arpmonitor.cpp

@@ -0,0 +1,96 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+ 
+#include <tins/tins.h>
+#include <map>
+#include <iostream>
+#include <functional>
+
+using namespace Tins;
+
+class arp_monitor {
+public:
+    void run(Sniffer &sniffer);
+private:
+    bool callback(const PDU &pdu);
+
+    std::map<IPv4Address, HWAddress<6>> addresses;
+};
+
+void arp_monitor::run(Sniffer &sniffer)
+{
+    sniffer.sniff_loop(
+        std::bind(
+            &arp_monitor::callback,
+            this,
+            std::placeholders::_1
+        )
+    );
+}
+
+bool arp_monitor::callback(const PDU &pdu)
+{
+    // Retrieve the ARP layer
+    const ARP &arp = pdu.rfind_pdu<ARP>();
+    // Is it an ARP reply?
+    if(arp.opcode() == ARP::REPLY) {
+        // Let's check if there's already an entry for this address
+        auto iter = addresses.find(arp.sender_ip_addr());
+        if(iter == addresses.end()) {
+            // We haven't seen this address. Save it.
+            addresses.insert({ arp.sender_ip_addr(), arp.sender_hw_addr()});
+            std::cout << "[INFO] " << arp.sender_ip_addr() << " is at "
+                      << arp.sender_hw_addr() << std::endl;
+        }
+        else {
+            // We've seen this address. If it's not the same HW address, inform it
+            if(arp.sender_hw_addr() != iter->second) {
+                std::cout << "[WARNING] " << arp.sender_ip_addr() << " is at " 
+                          << iter->second << " but also at " << arp.sender_hw_addr() 
+                          << std::endl;
+            }
+        }
+    }
+    return true;
+}
+
+int main(int argc, char *argv[]) 
+{
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <interface>\n";
+        return 1;
+    }
+    arp_monitor monitor;
+    // Sniff on the provided interface in promiscuous mode
+    Sniffer sniffer(argv[1], Sniffer::PROMISC);
+    
+    // Only capture arp packets
+    sniffer.set_filter("arp");
+    monitor.run(sniffer);
+}

examples/arpspoofing.cpp

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

examples/beacon_display.cpp

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -47,7 +47,7 @@ private:
 };
  
 void BeaconSniffer::run(const std::string &iface) {
-    Sniffer sniffer(iface, 1500, true, "type mgt subtype beacon");
+    Sniffer sniffer(iface, Sniffer::PROMISC, "type mgt subtype beacon", true);
     sniffer.sniff_loop(make_sniffer_handler(this, &BeaconSniffer::callback));
 }
  

examples/configure

@@ -1,11 +1,9 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.67 for myconfig 0.1.
+# Generated by GNU Autoconf 2.69 for myconfig 0.1.
 #
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -89,6 +87,7 @@ fi
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -133,6 +132,31 @@ export LANGUAGE
 # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
@@ -166,7 +190,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
 else
   exitcode=1; echo positional parameters were not saved.
 fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -211,14 +236,25 @@ IFS=$as_save_IFS
 
 
       if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
+  export CONFIG_SHELL
-	# neutralization value for shells without unset; and this also
+             # We cannot yet assume a decent shell, so we have to provide a
-	# works around shells that cannot unset nonexistent variables.
+# neutralization value for shells without unset; and this also
-	BASH_ENV=/dev/null
+# works around shells that cannot unset nonexistent variables.
-	ENV=/dev/null
+# Preserve -v and -x to the replacement shell.
-	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+BASH_ENV=/dev/null
-	export CONFIG_SHELL
+ENV=/dev/null
-	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
 fi
 
     if test x$as_have_required = xno; then :
@@ -320,6 +356,14 @@ $as_echo X"$as_dir" |
 
 
 } # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
 # as_fn_append VAR VALUE
 # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -441,6 +485,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
   chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).
@@ -475,16 +523,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -496,28 +544,8 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
+as_test_x='test -x'
-  as_test_x='test -x'
+as_executable_p=as_fn_executable_p
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -592,7 +620,6 @@ ac_includes_default="\
 
 ac_subst_vars='LTLIBOBJS
 LIBOBJS
-CFLAGS
 EGREP
 GREP
 CXXCPP
@@ -1059,7 +1086,7 @@ Try \`$0 --help' for more information"
     $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
     ;;
 
   esac
@@ -1110,8 +1137,6 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1339,9 +1364,9 @@ test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 myconfig configure 0.1
-generated by GNU Autoconf 2.67
+generated by GNU Autoconf 2.69
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1385,11 +1410,57 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
 	ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_cxx_try_compile
 
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
 # ac_fn_cxx_try_cpp LINENO
 # ------------------------
 # Try to preprocess conftest.$ac_ext, and return whether this succeeded.
@@ -1422,7 +1493,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 
     ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_cxx_try_cpp
@@ -1435,10 +1506,10 @@ fi
 ac_fn_cxx_check_header_mongrel ()
 {
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  if eval "test \"\${$3+set}\"" = set; then :
+  if eval \${$3+:} false; then :
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 fi
 eval ac_res=\$$3
@@ -1501,7 +1572,7 @@ $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
 esac
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   eval "$3=\$ac_header_compiler"
@@ -1510,7 +1581,7 @@ eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_cxx_check_header_mongrel
 
@@ -1551,7 +1622,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
        ac_retval=$ac_status
 fi
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_cxx_try_run
@@ -1565,7 +1636,7 @@ ac_fn_cxx_check_header_compile ()
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1583,61 +1654,15 @@ fi
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_cxx_check_header_compile
-
-# ac_fn_cxx_try_link LINENO
-# -------------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_cxx_try_link ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext conftest$ac_exeext
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_retval=1
-fi
-  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-  # interfere with the next link command; also delete a directory that is
-  # left behind by Apple's compiler.  We do this before executing the actions.
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-  as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_link
 cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by myconfig $as_me 0.1, which was
-generated by GNU Autoconf 2.67.  Invocation command line was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
 
@@ -1895,7 +1920,7 @@ $as_echo "$as_me: loading site script $ac_site_file" >&6;}
       || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
   fi
 done
 
@@ -2001,7 +2026,7 @@ if test -z "$CXX"; then
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then :
+if ${ac_cv_prog_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CXX"; then
@@ -2013,7 +2038,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2045,7 +2070,7 @@ do
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CXX"; then
@@ -2057,7 +2082,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CXX="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2209,7 +2234,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "C++ compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
@@ -2252,7 +2277,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -2311,7 +2336,7 @@ $as_echo "$ac_try_echo"; } >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot run C++ compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
     fi
   fi
 fi
@@ -2322,7 +2347,7 @@ rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
 ac_clean_files=$ac_clean_files_save
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 $as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
+if ${ac_cv_objext+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2363,7 +2388,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -2373,7 +2398,7 @@ OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2410,7 +2435,7 @@ ac_test_CXXFLAGS=${CXXFLAGS+set}
 ac_save_CXXFLAGS=$CXXFLAGS
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
 $as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then :
+if ${ac_cv_prog_cxx_g+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_cxx_werror_flag=$ac_cxx_werror_flag
@@ -2499,13 +2524,30 @@ ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ex
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
 
-if test -n "$debug"
+saved_libs="${LIBS}"
-then
+LIBS="${LIBS} -ltins"
-    CFLAGS="-DDEBUG -g"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libtins" >&5
-else
+$as_echo_n "checking libtins... " >&6; }
-    CFLAGS="-O3"
-fi
 
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <tins/dns.h>
+int
+main ()
+{
+Tins::DNS dummy
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  echo done
+else
+  echo error; echo *** libtins is not installed. Aborting... ***; exit 1
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS="${saved_libs}"
 
 ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
@@ -2515,7 +2557,7 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
 $as_echo_n "checking how to run the C++ preprocessor... " >&6; }
 if test -z "$CXXCPP"; then
-  if test "${ac_cv_prog_CXXCPP+set}" = set; then :
+  if ${ac_cv_prog_CXXCPP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CXXCPP needs to be expanded
@@ -2631,7 +2673,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5 ; }
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 
 ac_ext=cpp
@@ -2643,7 +2685,7 @@ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
 $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
+if ${ac_cv_path_GREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$GREP"; then
@@ -2657,7 +2699,7 @@ do
     for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+      as_fn_executable_p "$ac_path_GREP" || continue
 # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
@@ -2706,7 +2748,7 @@ $as_echo "$ac_cv_path_GREP" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
 $as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
+if ${ac_cv_path_EGREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -2723,7 +2765,7 @@ do
     for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+      as_fn_executable_p "$ac_path_EGREP" || continue
 # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
@@ -2773,7 +2815,7 @@ $as_echo "$ac_cv_path_EGREP" >&6; }
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -2900,65 +2942,20 @@ fi
 done
 
 
-for ac_header in pcap.h
+for ac_header in tins/tins.h
 do :
-  ac_fn_cxx_check_header_mongrel "$LINENO" "pcap.h" "ac_cv_header_pcap_h" "$ac_includes_default"
+  ac_fn_cxx_check_header_mongrel "$LINENO" "tins/tins.h" "ac_cv_header_tins_tins_h" "$ac_includes_default"
-if test "x$ac_cv_header_pcap_h" = x""yes; then :
+if test "x$ac_cv_header_tins_tins_h" = xyes; then :
   cat >>confdefs.h <<_ACEOF
-#define HAVE_PCAP_H 1
+#define HAVE_TINS_TINS_H 1
 _ACEOF
 
+else
+  echo "*** Error: libtins' headers are absent ***"; exit 1;
 fi
 
 done
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pcap_loop in -lpcap" >&5
-$as_echo_n "checking for pcap_loop in -lpcap... " >&6; }
-if test "${ac_cv_lib_pcap_pcap_loop+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpcap  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pcap_loop ();
-int
-main ()
-{
-return pcap_loop ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
-  ac_cv_lib_pcap_pcap_loop=yes
-else
-  ac_cv_lib_pcap_pcap_loop=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pcap_pcap_loop" >&5
-$as_echo "$ac_cv_lib_pcap_pcap_loop" >&6; }
-if test "x$ac_cv_lib_pcap_pcap_loop" = x""yes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPCAP 1
-_ACEOF
-
-  LIBS="-lpcap $LIBS"
-
-else
-  as_fn_error $? "pcap library is needed!" "$LINENO" 5
-fi
-
 
 ac_config_files="$ac_config_files Makefile"
 
@@ -3026,10 +3023,21 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
      :end' >>confcache
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
+    if test "x$cache_file" != "x/dev/null"; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
 $as_echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
   else
     { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
@@ -3097,7 +3105,7 @@ LTLIBOBJS=$ac_ltlibobjs
 
 
 
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
 ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
@@ -3198,6 +3206,7 @@ fi
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -3393,16 +3402,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -3462,28 +3471,16 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
+
-  as_test_x='test -x'
+# as_fn_executable_p FILE
-else
+# -----------------------
-  if ls -dL / >/dev/null 2>&1; then
+# Test if FILE is an executable regular file.
-    as_ls_L_option=L
+as_fn_executable_p ()
-  else
+{
-    as_ls_L_option=
+  test -f "$1" && test -x "$1"
-  fi
+} # as_fn_executable_p
-  as_test_x='
+as_test_x='test -x'
-    eval sh -c '\''
+as_executable_p=as_fn_executable_p
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -3505,7 +3502,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # values after options handling.
 ac_log="
 This file was extended by myconfig $as_me 0.1, which was
-generated by GNU Autoconf 2.67.  Invocation command line was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -3558,10 +3555,10 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 myconfig config.status 0.1
-configured by $0, generated by GNU Autoconf 2.67,
+configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -3638,7 +3635,7 @@ fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'
@@ -3669,7 +3666,7 @@ do
   case $ac_config_target in
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
 
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
@@ -3690,9 +3687,10 @@ fi
 # after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  tmp=
+  tmp= ac_tmp=
   trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
 ' 0
   trap 'as_fn_exit 1' 1 2 13 15
 }
@@ -3700,12 +3698,13 @@ $debug ||
 
 {
   tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
+  test -d "$tmp"
 }  ||
 {
   tmp=./conf$$-$RANDOM
   (umask 077 && mkdir "$tmp")
 } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
@@ -3727,7 +3726,7 @@ else
   ac_cs_awk_cr=$ac_cr
 fi
 
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
 _ACEOF
 
 
@@ -3755,7 +3754,7 @@ done
 rm -f conf$$subs.sh
 
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
 _ACEOF
 sed -n '
 h
@@ -3803,7 +3802,7 @@ t delim
 rm -f conf$$subs.awk
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
   for (key in S) S_is_set[key] = 1
   FS = ""
 
@@ -3835,7 +3834,7 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
   sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 else
   cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
   || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
 _ACEOF
 
@@ -3875,7 +3874,7 @@ do
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -3894,7 +3893,7 @@ do
     for ac_f
     do
       case $ac_f in
-      -) ac_f="$tmp/stdin";;
+      -) ac_f="$ac_tmp/stdin";;
       *) # Look for the file first in the build tree, then in the source tree
 	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
 	 # because $ac_f cannot contain `:'.
@@ -3903,7 +3902,7 @@ do
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -3929,8 +3928,8 @@ $as_echo "$as_me: creating $ac_file" >&6;}
     esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin" \
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5  ;;
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
     esac
     ;;
   esac
@@ -4055,21 +4054,22 @@ s&@abs_builddir@&$ac_abs_builddir&;t t
 s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 $ac_datarootdir_hack
 "
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
-  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined" >&5
 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 which seems to be undefined.  Please make sure it is defined" >&2;}
 
-  rm -f "$tmp/stdin"
+  rm -f "$ac_tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
-  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
   esac \
   || as_fn_error $? "could not create $ac_file" "$LINENO" 5
  ;;

examples/configure.ac

@@ -3,14 +3,15 @@ AC_INIT(myconfig, 0.1)
 AC_PROG_CXX()
 AC_LANG(C++)
 
-if test -n "$debug"
+saved_libs="${LIBS}"
-then
+LIBS="${LIBS} -ltins"
-    CFLAGS="-DDEBUG -g"
+AC_MSG_CHECKING(libtins)
-else
+AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <tins/dns.h>], 
-    CFLAGS="-O3"
+    [Tins::DNS dummy])],
-fi
+    [echo done],
+    [echo error; echo *** libtins is not installed. Aborting... ***; exit 1])
+LIBS="${saved_libs}"
+
+AC_CHECK_HEADERS([tins/tins.h], , [echo "*** Error: libtins' headers are absent ***"; exit 1;])
 
-AC_CHECK_HEADERS([pcap.h])
-AC_CHECK_LIB(pcap, pcap_loop, [], [AC_MSG_ERROR([pcap library is needed!])])
-AC_SUBST(CFLAGS)
 AC_OUTPUT(Makefile)

examples/dns_queries.cpp

@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <tins/tins.h>
+#include <iostream>
+
+using namespace Tins;
+
+bool callback(const PDU &pdu) 
+{
+    // The packet probably looks like this:
+    //
+    // EthernetII / IP / UDP / RawPDU
+    //
+    // So we retrieve the RawPDU layer, and construct a 
+    // DNS PDU using its contents.
+    DNS dns = pdu.rfind_pdu<RawPDU>().to<DNS>();
+    
+    // Retrieve the queries and print the domain name:
+    for(const auto &query : dns.queries()) 
+        std::cout << query.dname() << std::endl;
+    return true;
+}
+
+int main(int argc, char *argv[]) 
+{
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <interface>" << std::endl;
+        return 1;
+    }
+    // Sniff on the provided interface in promiscuos mode
+    Sniffer sniffer(argv[1], Sniffer::PROMISC);
+    
+    // Only capture udp packets sent to port 53
+    sniffer.set_filter("udp and dst port 53");
+    
+    // Start the capture
+    sniffer.sniff_loop(callback);
+}

examples/dns_spoof.cpp

@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <tins/tins.h>
+#include <iostream>
+
+using namespace Tins;
+
+PacketSender sender;
+
+bool callback(const PDU &pdu) 
+{
+    // The packet probably looks like this:
+    //
+    // EthernetII / IP / UDP / RawPDU
+    //
+    // So we retrieve each layer, and construct a 
+    // DNS PDU from the RawPDU layer contents.
+    EthernetII eth = pdu.rfind_pdu<EthernetII>();
+    IP ip = eth.rfind_pdu<IP>();
+    UDP udp = ip.rfind_pdu<UDP>();
+    DNS dns = udp.rfind_pdu<RawPDU>().to<DNS>();
+
+    // Is it a DNS query?
+    if(dns.type() == DNS::QUERY) {
+        // Let's see if there's any query for an "A" record.
+        for(const auto &query : dns.queries()) {
+            if(query.type() == DNS::A) {
+                // Here's one! Let's add an answer.
+                dns.add_answer(
+                    DNS::Resource(
+                        query.dname(), 
+                        "127.0.0.1",
+                        DNS::A, 
+                        query.query_class(), 
+                        // 777 is just a random TTL
+                        777
+                    )
+                );
+            }
+        }
+        // Have we added some answers?
+        if(dns.answers_count() > 0) {
+            // It's a response now
+            dns.type(DNS::RESPONSE);
+            // Recursion is available(just in case)
+            dns.recursion_available(1);
+            // Build our packet
+            auto pkt = EthernetII(eth.src_addr(), eth.dst_addr()) /
+                        IP(ip.src_addr(), ip.dst_addr()) /
+                        UDP(udp.sport(), udp.dport()) /
+                        dns;
+            // Send it!
+            sender.send(pkt);
+        }
+    }
+    return true;
+}
+
+int main(int argc, char *argv[]) 
+{
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <interface>" << std::endl;
+        return 1;
+    }
+    // Sniff on the provided interface in promiscuos mode
+    Sniffer sniffer(argv[1], Sniffer::PROMISC);
+    
+    // Only capture udp packets sent to port 53
+    sniffer.set_filter("udp and dst port 53");
+    
+    // All packets will be sent through the provided interface
+    sender.default_interface(argv[1]);
+    
+    // Start the capture
+    sniffer.sniff_loop(callback);
+}

examples/dns_stats.cpp

@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <iostream>
+#include <mutex>
+#include <chrono>
+#include <map>
+#include <thread>
+#include <algorithm>
+#include <tins/tins.h>
+
+using namespace Tins;
+
+// Holds the DNS response time statistics. The response time is 
+// represented using the Duration template parameter.
+template<typename Duration>
+class statistics {
+public:
+    using duration_type = Duration;
+    using locker_type = std::lock_guard<std::mutex>;
+    
+    struct information {
+        duration_type average, worst;
+        size_t count;
+    };
+    
+    statistics()
+    : m_duration(), m_worst(duration_type::min()), m_count()
+    {
+        
+    }
+    
+    void add_response_time(const duration_type& duration)
+    {
+        locker_type _(m_lock);
+        m_duration += duration;
+        m_count++;
+        m_worst = std::max(m_worst, duration);
+    }
+    
+    information get_information() const 
+    {
+        locker_type _(m_lock);
+        if(m_count == 0)
+            return { };
+        else 
+            return { m_duration / m_count, m_worst, m_count };
+    };
+private:
+    duration_type m_duration, m_worst;
+    size_t m_count;
+    mutable std::mutex m_lock;
+};
+
+// Sniffs and tracks DNS queries. When a matching DNS response is found,
+// the response time is added to a statistics object.
+//
+// This class performs *no cleanup* on data associated with queries that
+// weren't answered.
+class dns_monitor {
+public:
+    // The response times are measured in milliseconds
+    using duration_type = std::chrono::milliseconds;
+    // The statistics type used.
+    using statistics_type = statistics<duration_type>;
+    
+    void run(BaseSniffer& sniffer);
+    const statistics_type& stats() const {
+        return m_stats;
+    }
+private:
+    using packet_info = std::tuple<IPv4Address, IPv4Address, uint16_t>;
+    using clock_type = std::chrono::steady_clock;
+    using time_point_type = std::chrono::time_point<clock_type>;
+
+    bool callback(const PDU& pdu);
+    static packet_info make_packet_info(const PDU& pdu, const DNS& dns);
+    
+    statistics_type m_stats;    
+    std::map<packet_info, time_point_type> m_packet_info;
+};
+
+void dns_monitor::run(BaseSniffer& sniffer)
+{
+    sniffer.sniff_loop(
+        std::bind(
+            &dns_monitor::callback, 
+            this, 
+            std::placeholders::_1
+        )
+    );
+}
+
+bool dns_monitor::callback(const PDU& pdu)
+{
+    auto now = clock_type::now();
+    auto dns = pdu.rfind_pdu<RawPDU>().to<DNS>();
+    auto info = make_packet_info(pdu, dns);
+    // If it's a query, add the sniff time to our map.
+    if(dns.type() == DNS::QUERY) {
+        m_packet_info.insert(
+            std::make_pair(info, now)
+        );
+    }
+    else {
+        // It's a response, we need to find the query in our map.
+        auto iter = m_packet_info.find(info);
+        if(iter != m_packet_info.end()) {
+            // We found the query, let's add the response time to the
+            // statistics object.
+            m_stats.add_response_time(
+                std::chrono::duration_cast<duration_type>(now - iter->second)
+            );
+            // Forget about the query.
+            m_packet_info.erase(iter);
+        }
+    }
+    return true;
+}
+
+// It is required that we can identify packets sent and received that
+// hold the same DNS id as belonging to the same query. 
+// 
+// This function retrieves a tuple (addr, addr, id) that will achieve it.
+auto dns_monitor::make_packet_info(const PDU& pdu, const DNS& dns) -> packet_info
+{
+    const auto& ip = pdu.rfind_pdu<IP>();
+    return std::make_tuple( 
+        // smallest address first
+        std::min(ip.src_addr(), ip.dst_addr()),
+        // largest address second
+        std::max(ip.src_addr(), ip.dst_addr()),
+        dns.id()
+    );
+}
+
+int main(int argc, char *argv[]) {
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <interface>\n";
+        return 1;
+    }
+    try {
+        Sniffer sniffer(argv[1], Sniffer::PROMISC);
+        sniffer.set_filter("udp and port 53");
+        dns_monitor monitor;
+        std::thread thread(
+            [&]() {
+                monitor.run(sniffer);
+            }
+        );
+        while(true) {
+            auto info = monitor.stats().get_information();
+            std::cout << "\rAverage " << info.average.count() 
+                        << "ms. Worst: " << info.worst.count() << "ms. Count: "
+                        << info.count;
+            std::cout.flush();
+            std::this_thread::sleep_for(std::chrono::seconds(1));
+        }
+    }
+    catch(std::exception& ex) {
+        std::cout << "[-] Error: " << ex.what() << std::endl;
+    }
+}

examples/portscan.cpp

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

examples/traceroute.cpp

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

examples/wps_detect.cpp

@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <tins/tins.h>
+#include <iostream>
+#include <set>
+#include <string>
+
+using namespace Tins;
+
+// BSSIDs which we've already seen
+std::set<HWAddress<6>> addrs;
+// This will be the content of the OUI field in the vendor specific 
+// tagged option if it's a WPS tag.
+const HWAddress<3> expected_oui("00:50:F2");
+
+bool handler(const PDU& pdu) {
+    const Dot11Beacon &beacon = pdu.rfind_pdu<Dot11Beacon>();
+    // Only process it once
+    if(addrs.insert(beacon.addr3()).second) {
+        // Iterate the tagged options
+        for(const auto &opt : beacon.options()) {
+            // Is this a vendor-specific tag?
+            if(opt.option() == Dot11::VENDOR_SPECIFIC) {
+                // Make sure there's enough size for the OUI + identifier
+                if(opt.data_size() >= 4) { 
+                    // Retrieve the OUI field
+                    HWAddress<3> addr = opt.data_ptr();
+                    // Are we interested in this OUI and is it a WPS tag?
+                    if(addr == expected_oui && opt.data_ptr()[3] == 0x04) {
+                        std::cout << "[+] Access point: " << beacon.ssid() << " uses WPS\n";
+                    }
+                }
+            }
+        }
+    }
+    return true;
+}
+
+int main(int argc, char *argv[]) {
+    if(argc != 2) {
+        std::cout << "Usage: " << *argv << " <DEVICE>\n";
+        return 1;
+    }
+    // Only sniff beacons
+    Sniffer sniffer(argv[1], 2000, true, "wlan type mgt subtype beacon");
+    sniffer.sniff_loop(handler);
+}

include/CMakeLists.txt

@@ -0,0 +1,7 @@
+FILE(GLOB INCLUDE_FILES "*.h")
+INSTALL(
+    FILES ${INCLUDE_FILES} 
+    DESTINATION include/tins
+    COMPONENT Headers
+)
+ADD_SUBDIRECTORY(dot11)

include/address_range.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/arp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/bootp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/config.h.in

@@ -1,86 +1,9 @@
-/* include/config.h.in.  Generated from configure.ac by autoheader.  */
 
-/* define if the compiler supports basic C++11 syntax */
+/* Define if the compiler supports basic C++11 syntax */
-#undef HAVE_CXX11
+#cmakedefine HAVE_CXX11
 
-/* Define to 1 if you have the <dlfcn.h> header file. */
+/* Have IEEE 802.11 support */
-#undef HAVE_DLFCN_H
+#cmakedefine HAVE_DOT11
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `crypto' library (-lcrypto). */
-#undef HAVE_LIBCRYPTO
-
-/* Define to 1 if you have the `pcap' library (-lpcap). */
-#undef HAVE_LIBPCAP
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <openssl/aes.h> header file. */
-#undef HAVE_OPENSSL_AES_H
-
-/* Define to 1 if you have the <openssl/evp.h> header file. */
-#undef HAVE_OPENSSL_EVP_H
-
-/* Define to 1 if you have the <openssl/hmac.h> header file. */
-#undef HAVE_OPENSSL_HMAC_H
-
-/* Define to 1 if you have the <pcap.h> header file. */
-#undef HAVE_PCAP_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
 
 /* Have WPA2 decryption library */
-#undef HAVE_WPA2_DECRYPTION
+#cmakedefine HAVE_WPA2_DECRYPTION
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
-   */
-#undef LT_OBJDIR
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION

include/constants.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/crypto.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,9 @@
  *
  */
 
-#ifndef TINS_CRYPTO_H
+#include "config.h"
+
+#if !defined(TINS_CRYPTO_H) && defined(HAVE_DOT11)
 #define TINS_CRYPTO_H
 
 #include <map>
@@ -38,7 +40,6 @@
 #include "snap.h"
 #include "rawpdu.h"
 #include "handshake_capturer.h"
-#include "config.h"
 
 namespace Tins {
 class PDU;
@@ -49,7 +50,7 @@ namespace Crypto {
     /**
      * \cond
      */
-    class RC4Key;
+    struct RC4Key;
     #ifdef HAVE_WPA2_DECRYPTION
     namespace WPA2 {
         class invalid_handshake : public std::exception {

include/cxxstd.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -38,7 +38,9 @@
     #define TINS_CXXSTD_GCC_FIX 0
 #endif // __GXX_EXPERIMENTAL_CXX0X__
 
-#define TINS_IS_CXX11 (__cplusplus > 199711L || TINS_CXXSTD_GCC_FIX == 1)
+#ifndef TINS_IS_CXX11
+#define TINS_IS_CXX11 (__cplusplus > 199711L || TINS_CXXSTD_GCC_FIX == 1 || _MSC_VER >= 1800)
+#endif  // TINS_IS_CXX11
 
 namespace Tins{
 namespace Internals {

include/dhcp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -32,6 +32,7 @@
 
 
 #include <list>
+#include <vector>
 #include <string>
 #include "bootp.h"
 #include "pdu_option.h"
@@ -145,7 +146,7 @@ namespace Tins {
         /**
          * The DHCP option type.
          */
-        typedef PDUOption<uint8_t> option;
+        typedef PDUOption<uint8_t, DHCP> option;
         
         /**
          * The type used to store the DHCP options.
@@ -271,7 +272,7 @@ namespace Tins {
          * 
          * \param routers A list of ip addresses.
          */
-        void routers(const std::list<ipaddress_type> &routers);
+        void routers(const std::vector<ipaddress_type> &routers);
         
         /** 
          * \brief Adds a domain name servers option.
@@ -280,7 +281,7 @@ namespace Tins {
          * 
          * \param dns A list of ip addresses.
          */
-        void domain_name_servers(const std::list<ipaddress_type> &dns);
+        void domain_name_servers(const std::vector<ipaddress_type> &dns);
         
         /** 
          * \brief Adds a broadcast address option.
@@ -309,6 +310,15 @@ namespace Tins {
          */
         void domain_name(const std::string &name);
 
+        /** 
+         * \brief Adds a hostname option.
+         * 
+         * The new option is appended at the end of the list.
+         * 
+         * \param name The hostname.
+         */
+        void hostname(const std::string &name);
+        
         // Option getters
         
         /**
@@ -377,10 +387,10 @@ namespace Tins {
          * If the option is not found, an option_not_found exception
          * is thrown.
          * 
-         * \return std::list<ipaddress_type> Containing the routers 
+         * \return std::vector<ipaddress_type> Containing the routers 
          * option data.
          */
-        std::list<ipaddress_type> routers() const;
+        std::vector<ipaddress_type> routers() const;
         
         /**
          * \brief Searchs for a dns option.
@@ -391,7 +401,7 @@ namespace Tins {
          * \return std::list<ipaddress_type> Contanining the DNS servers
          * provided.
          */
-        std::list<ipaddress_type> domain_name_servers() const; 
+        std::vector<ipaddress_type> domain_name_servers() const; 
         
         /**
          * \brief Searchs for a broadcast option.
@@ -423,6 +433,16 @@ namespace Tins {
          */
         std::string domain_name() const;
 
+        /**
+         * \brief Searchs for a hostname option.
+         * 
+         * If the option is not found, an option_not_found exception
+         * is thrown.
+         * 
+         * \return std::string Containing the hostname.
+         */
+        std::string hostname() const;
+        
         /** 
          * \brief Getter for the options list.
          * \return The option list.
@@ -451,26 +471,18 @@ namespace Tins {
     private:
         static const uint32_t MAX_DHCP_SIZE;
       
-        template<typename T>
-        struct type2type {};
-      
         void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
 
         template<class T> 
-        T generic_search(OptionTypes opt, type2type<T>) const {
+        T search_and_convert(OptionTypes opt) const {
             const option *option = search_option(opt);
-            if(option && option->data_size() == sizeof(T))
+            if(!option)
-                return *(const T*)option->data_ptr();
-            else
                 throw option_not_found();
+            return option->to<T>();
         }
         
         void internal_add_option(const option &opt);
-        std::list<ipaddress_type> generic_search(OptionTypes opt, type2type<std::list<ipaddress_type> >) const;
+        serialization_type serialize_list(const std::vector<ipaddress_type> &ip_list);
-        std::string generic_search(OptionTypes opt, type2type<std::string>) const;
-        ipaddress_type generic_search(OptionTypes opt, type2type<ipaddress_type>) const;
-        
-        serialization_type serialize_list(const std::list<ipaddress_type> &ip_list);
         
         options_type _options;
         uint32_t _size;

include/dhcpv6.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -30,6 +30,7 @@
 #ifndef TINS_DHCPV6_H
 #define TINS_DHCPV6_H
 
+#include <cstring>
 #include <list>
 #include "pdu.h"
 #include "endianness.h"
@@ -46,7 +47,7 @@ public:
     /**
      * Represents a DHCPv6 option. 
      */
-    typedef PDUOption<uint16_t> option;
+    typedef PDUOption<uint16_t, DHCPv6> option;
 
     /**
      * The message types.
@@ -179,6 +180,8 @@ public:
         ia_na_type(uint32_t id = 0, uint32_t t1 = 0, uint32_t t2 = 0,
           const options_type& options = options_type())
         : id(id), t1(t1), t2(t2), options(options) {}
+
+        static ia_na_type from_option(const option &opt);
     };
     
     /**
@@ -194,6 +197,8 @@ public:
         ia_ta_type(uint32_t id = 0,
           const options_type& options = options_type())
         : id(id), options(options) {}
+
+        static ia_ta_type from_option(const option &opt);
     };
 
     /**
@@ -211,6 +216,8 @@ public:
           const options_type& options = options_type())
         : address(address), preferred_lifetime(preferred_lifetime), 
           valid_lifetime(valid_lifetime), options(options) {}
+
+        static ia_address_type from_option(const option &opt);
     };
     
     /**
@@ -228,6 +235,8 @@ public:
           const auth_info_type &auth_info = auth_info_type())
         : protocol(protocol), algorithm(algorithm), rdm(rdm),
         replay_detection(replay_detection), auth_info(auth_info) {}
+
+        static authentication_type from_option(const option &opt);
     };
     
     /**
@@ -239,6 +248,8 @@ public:
         
         status_code_type(uint16_t code = 0, const std::string &message = "")
         : code(code), message(message) { }
+
+        static status_code_type from_option(const option &opt);
     };
     
     /**
@@ -253,6 +264,8 @@ public:
         vendor_info_type(uint32_t enterprise_number = 0, 
           const data_type &data = data_type())
         : enterprise_number(enterprise_number), data(data) { }
+
+        static vendor_info_type from_option(const option &opt);
     };
     
     
@@ -264,7 +277,19 @@ public:
     /**
      * The type used to store the User Class option.
      */
-    typedef std::vector<class_option_data_type> user_class_type;
+    //typedef std::vector<class_option_data_type> user_class_type;
+    struct user_class_type {
+        typedef std::vector<class_option_data_type> data_type;
+        data_type data;
+
+        user_class_type(const data_type &data = data_type())
+        : data(data)
+        {
+
+        }
+
+        static user_class_type from_option(const option &opt);
+    };
     
     /**
      * The type used to store the Vendor Class option.
@@ -279,6 +304,8 @@ public:
           const class_data_type &vendor_class_data = class_data_type())
         : enterprise_number(enterprise_number), 
         vendor_class_data(vendor_class_data) { }
+
+        static vendor_class_type from_option(const option &opt);
     };
     
     /**
@@ -361,12 +388,14 @@ public:
         
         duid_type(const duid_ll &identifier)
         : id(duid_en::duid_id), data(identifier.serialize()) {}
+
+        static duid_type from_option(const option &opt);
     };
         
     /**
      * The type used to store the Option Request option.
      */
-    typedef std::vector<OptionTypes> option_request_type;
+    typedef std::vector<uint16_t> option_request_type;
     
     /**
      * The type used to store the Relay Message option.
@@ -838,51 +867,62 @@ private:
         return option;
     }
 
-    template<typename InputIterator>
+    template<typename T>
-    void class_option_data2option(InputIterator start, InputIterator end, 
+    T search_and_convert(OptionTypes opt) const {
-      std::vector<uint8_t>& buffer, size_t start_index = 0) 
+        const option *option = search_option(opt);
-    {
+        if(!option)
-        size_t index = start_index;
-        while(start != end) {
-            buffer.resize(buffer.size() + sizeof(uint16_t) + start->size());
-            *(uint16_t*)&buffer[index] = Endian::host_to_be<uint16_t>(start->size());
-            index += sizeof(uint16_t);
-            std::copy(start->begin(), start->end(), buffer.begin() + index);
-            index += start->size();
-            
-            start++;
-        }
-    }
-    
-    template<typename OutputType>
-    OutputType option2class_option_data(const uint8_t *ptr, uint32_t total_sz) const
-    {
-        typedef typename OutputType::value_type value_type;
-        OutputType output;
-        size_t index = 0;
-        while(index + 2 < total_sz) {
-            uint16_t size = Endian::be_to_host(
-                *(const uint16_t*)(ptr + index)
-            );
-            index += sizeof(uint16_t);
-            if(index + size > total_sz)
-                throw option_not_found();
-            output.push_back(
-                value_type(ptr + index, ptr + index + size)
-            );
-            index += size;
-        }
-        if(index != total_sz)
             throw option_not_found();
-        return output;
+        return option->to<T>();
     }
 
-
     uint8_t header_data[4];
     uint32_t options_size;
     ipaddress_type link_addr, peer_addr;
     options_type options_;
 };   
+
+namespace Internals {
+template<typename InputIterator>
+void class_option_data2option(InputIterator start, InputIterator end, 
+  std::vector<uint8_t>& buffer, size_t start_index = 0) 
+{
+    size_t index = start_index;
+    uint16_t uint16_t_buffer;
+    while(start != end) {
+        buffer.resize(buffer.size() + sizeof(uint16_t) + start->size());
+        uint16_t_buffer = Endian::host_to_be<uint16_t>(start->size());
+        std::memcpy(&buffer[index], &uint16_t_buffer, sizeof(uint16_t));
+        index += sizeof(uint16_t);
+        std::copy(start->begin(), start->end(), buffer.begin() + index);
+        index += start->size();
+        
+        start++;
+    }
+}
+
+template<typename OutputType>
+OutputType option2class_option_data(const uint8_t *ptr, uint32_t total_sz)
+{
+    typedef typename OutputType::value_type value_type;
+    OutputType output;
+    size_t index = 0;
+    while(index + 2 < total_sz) {
+        uint16_t size;
+        std::memcpy(&size, ptr + index, sizeof(uint16_t));
+        size = Endian::be_to_host(size);
+        index += sizeof(uint16_t);
+        if(index + size > total_sz)
+            throw option_not_found();
+        output.push_back(
+            value_type(ptr + index, ptr + index + size)
+        );
+        index += size;
+    }
+    if(index != total_sz)
+        throw malformed_option();
+    return output;
+}
+} 
 }
 
 #endif // TINS_DHCPV6_H

include/dns.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -39,7 +39,6 @@
 #include "macros.h"
 #include "pdu.h"
 #include "endianness.h"
-#include "dns_record.h"
 
 namespace Tins {
     class IPv4Address;
@@ -200,14 +199,24 @@ namespace Tins {
          */
         class Resource {
         public:
-            Resource(const std::string &nm, const std::string &ad, 
+            /**
-              uint16_t t, uint16_t c, uint32_t tt) 
+             * Constructs a Resource object.
-            : dname_(nm), addr_(ad), type_(t), qclass_(c), ttl_(tt) {}
+             *
+             * \param dname The domain name for which this records 
+             * provides an answer.
+             * \param data The resource's payload.
+             * \param type The type of this record.
+             * \param rclass The class of this record.
+             * \param ttl The time-to-live of this record.
+             */
+            Resource(const std::string &dname, const std::string &data, 
+              uint16_t type, uint16_t rclass, uint32_t ttl) 
+            : dname_(dname), data_(data), type_(type), qclass_(rclass), ttl_(ttl) {}
             
             Resource() : type_(), qclass_(), ttl_() {}
             
             /**
-             * \brief Getter for the dname field.
+             * \brief Getter for the domain name field.
              * 
              * This returns the domain name for which this record 
              * provides an answer.
@@ -215,9 +224,9 @@ namespace Tins {
             const std::string &dname() const { return dname_; }
             
             /**
-             * Getter for the type field.
+             * Getter for the data field. 
              */
-            const std::string &data() const { return addr_; }
+            const std::string &data() const { return data_; }
             
             /**
              * Getter for the query type field.
@@ -233,8 +242,52 @@ namespace Tins {
              * Getter for the type field.
              */
             uint32_t ttl() const { return ttl_; }
+
+            /**
+             * Setter for the domain name field.
+             */
+            void dname(const std::string &data) {
+                dname_ = data;
+            }
+
+            /**
+             * \brief Setter for the data field.
+             *
+             * The data will be encoded properly by the DNS class before
+             * being added to this packet. That means that if the type is
+             * A or AAAA, it will be properly encoded as an IPv4 or
+             * IPv6 address. 
+             * 
+             * The same happens for records that contain domain names,
+             * such as NS or CNAME. This data will be encoded using 
+             * DNS domain name encoding.
+             */
+            void data(const std::string &data) {
+                data_ = data;
+            }
+
+            /**
+             * Setter for the type field.
+             */
+            void type(uint16_t data) {
+                type_ = data;
+            }
+
+            /**
+             * Setter for the class field.
+             */
+            void query_class(uint16_t data) {
+                qclass_ = data;
+            }
+
+            /**
+             * Setter for the time-to-live field.
+             */
+            void ttl(uint16_t data) {
+                ttl_ = data;
+            }
         private:
-            std::string dname_, addr_;
+            std::string dname_, data_;
             uint16_t type_, qclass_;
             uint32_t ttl_;
         };
@@ -482,100 +535,71 @@ namespace Tins {
         void add_query(const Query &query);
         
         /**
-         * \brief Add a query response.
+         * \brief Add an answer resource record.
          * 
-         * \param name The resolved name.
+         * \param resource The resource to be added.
-         * \param type The type of this answer.
-         * \param qclass The class of this answer.
-         * \param ttl The time-to-live of this answer.
-         * \param ip The ip address of the resolved name.
          */
-        void add_answer(const std::string &name, 
+        void add_answer(const Resource &resource);
-          const DNSResourceRecord::info &info, address_type ip);
 
         /**
-         * \brief Add a query response.
+         * \brief Add an authority resource record.
          * 
-         * \param name The resolved name.
+         * \param resource The resource to be added.
-         * \param type The type of this answer.
-         * \param qclass The class of this answer.
-         * \param ttl The time-to-live of this answer.
-         * \param ip The ip address of the resolved name.
          */
-        void add_answer(const std::string &name, 
+        void add_authority(const Resource &resource);
-          const DNSResourceRecord::info &info, address_v6_type ip);
         
         /**
-         * \brief Add a query response.
+         * \brief Add an additional resource record.
          * 
-         * \param name The resolved name.
+         * \param resource The resource to be added.
-         * \param type The type of this answer.
-         * \param qclass The class of this answer.
-         * \param ttl The time-to-live of this answer.
-         * \param dname The domain of the resolved name.
          */
-        void add_answer(const std::string &name, 
+        void add_additional(const Resource &resource);
-          const DNSResourceRecord::info &info, const std::string &dname);
-                        
-        /**
-         * \brief Add a query response.
-         * 
-         * \param name The resolved name.
-         * \param type The type of this answer.
-         * \param qclass The class of this answer.
-         * \param ttl The time-to-live of this answer.
-         * \param data The data of this option.
-         * \param sz The size of the data.
-         */
-        void add_answer(const std::string &name, 
-          const DNSResourceRecord::info &info, const uint8_t *data, uint32_t sz);
-        
-        /**
-         * \brief Add an authority record.
-         * 
-         * \param name The resolved name.
-         * \param type The type of this record.
-         * \param qclass The class of this record.
-         * \param ttl The time-to-live of this record.
-         * \param data The data of this option.
-         * \param sz The size of the data.
-         */
-        void add_authority(const std::string &name, 
-          const DNSResourceRecord::info &info, const uint8_t *data, uint32_t sz);
-        
-        /**
-         * \brief Add an additional record.
-         * 
-         * \param name The resolved name.
-         * \param type The type of this record.
-         * \param qclass The class of this record.
-         * \param ttl The time-to-live of this record.
-         * \param ip The ip address of the resolved name.
-         */
-        void add_additional(const std::string &name, 
-          const DNSResourceRecord::info &info, uint32_t ip);
-                        
         
         /**
          * \brief Getter for this PDU's DNS queries.
          * 
-         * This method is <b>not thread safe</b>.
+         * \return The query records in this PDU.
-         * 
-         * \return std::list<Query> containing the queries in this
-         * record.
          */
         queries_type queries() const;
         
         /**
          * \brief Getter for this PDU's DNS answers
          * 
-         * This method is <b>not thread safe</b>.
+         * \return The answer records in this PDU.
-         * 
-         * \return std::list<Resource> containing the answers in this
-         * record.
          */
         resources_type answers() const;
 
+        /**
+         * \brief Getter for this PDU's DNS authority records.
+         * 
+         * \return The authority records in this PDU.
+         */
+        resources_type authority() const;
+
+        /**
+         * \brief Getter for this PDU's DNS additional records.
+         * 
+         * \return The additional records in this PDU.
+         */
+        resources_type additional() const;
+        
+        /**
+         * \brief Encodes a domain name.
+         *
+         * This processes the input domain name and returns the encoded 
+         * version. Each label in the original domain name will be 
+         * prefixed with a byte that indicates the label's length. 
+         * The null-terminator byte <b>will</b> be included in the encoded
+         * string. No compression is performed.
+         *
+         * For example, given the input "www.example.com", the output would
+         * be "\x03www\x07example\x03com\x00".
+         * 
+         * \param domain_name The domain name to encode.
+         * \return The encoded domain name.
+         */
+        static std::string encode_domain_name(const std::string &domain_name);
+
         /** 
          * \brief Check wether ptr points to a valid response for this PDU.
          *
@@ -591,17 +615,6 @@ namespace Tins {
         DNS *clone() const {
             return new DNS(*this);
         }
-        
-        /**
-         * Helper function to create a resource record information.
-         * 
-         * \param type The type of the query.
-         * \param qclass The class of the query.
-         * \param ttl The time-to-live of the query.
-         */
-        static DNSResourceRecord::info make_info(QueryType type, QueryClass qclass, uint32_t ttl) {
-            return DNSResourceRecord::info((uint16_t)type, (uint16_t)qclass, ttl);
-        }
     private:
         TINS_BEGIN_PACK
         struct dnshdr {
@@ -635,35 +648,23 @@ namespace Tins {
                      authority, additional;
         } TINS_END_PACK;
         
-        typedef std::map<uint16_t, std::string> SuffixMap;
-        typedef std::map<uint16_t, uint16_t> SuffixIndices;
-        typedef std::list<DNSResourceRecord> ResourcesType;
         typedef std::list<Query> QueriesType;
+        typedef std::vector<std::pair<uint32_t*, uint32_t> > sections_type;
         
-        const uint8_t *build_resource_list(ResourcesType &lst, const uint8_t *ptr, uint32_t &sz, uint16_t nrecs);
+        const uint8_t* compose_name(const uint8_t *ptr, char *out_ptr) const;
-        uint32_t find_domain_name(const std::string &dname);
+        void convert_records(const uint8_t *ptr, const uint8_t *end, resources_type &res) const;
-        bool find_domain_name(const std::string &dname, const ResourcesType &lst, uint16_t &out);
+        const uint8_t* find_section_end(const uint8_t *ptr, const uint32_t num_records) const;
-        void parse_domain_name(const std::string &dn, std::string &out) const;
+        const uint8_t* find_dname_end(const uint8_t *ptr) const;
-        void unparse_domain_name(const std::string &dn, std::string &out) const;
+        void update_records(uint32_t &section_start, uint32_t num_records, uint32_t threshold, uint32_t offset);
-        void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
+        uint8_t *update_dname(uint8_t *ptr, uint32_t threshold, uint32_t offset);
-        uint8_t *serialize_list(const ResourcesType &lst, uint8_t *buffer) const;
+        static void inline_convert_v4(uint32_t value, char *output);
-        void compose_name(const uint8_t *ptr, uint32_t sz, std::string &out) const;
-        void convert_resources(const ResourcesType &lst, std::list<Resource> &res) const;
-        DNSResourceRecord make_record(const std::string &name, const DNSResourceRecord::info &info, uint32_t ip);
-        DNSResourceRecord make_record(const std::string &name, const DNSResourceRecord::info &info, const std::string &dname);
-        DNSResourceRecord make_record(const std::string &name, const DNSResourceRecord::info &info, const uint8_t *ptr, uint32_t len);
-        void add_suffix(uint32_t index, const uint8_t *data, uint32_t sz) const;
-        uint32_t build_suffix_map(uint32_t index, const ResourcesType &lst) const;
-        uint32_t build_suffix_map(uint32_t index, const QueriesType &lst) const;
-        void build_suffix_map() const ;
         static bool contains_dname(uint16_t type);
+        void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
+        void add_record(const Resource &resource, const sections_type &sections);
         
         dnshdr dns;
-        uint32_t extra_size;
+        byte_array records_data;
-        std::list<Query> queries_;
+        uint32_t answers_idx, authority_idx, additional_idx;
-        ResourcesType ans, arity, addit;
-        mutable SuffixMap suffixes;
-        mutable SuffixIndices suffix_indices;
     };
 }
 

include/dns_record.h

@@ -1,272 +0,0 @@
-/*
- * Copyright (c) 2012, Matias Fontanini
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above
- *   copyright notice, this list of conditions and the following disclaimer
- *   in the documentation and/or other materials provided with the
- *   distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef TINS_DNS_RECORD_H
-#define TINS_DNS_RECORD_H
-
-#include <string>
-#include <vector>
-#include <stdint.h>
-#include "cxxstd.h"
-#include "macros.h"
-
-namespace Tins {
-/** 
- * \cond
- */
-class DNSRRImpl {
-public:
-    virtual ~DNSRRImpl() {}
-    virtual uint32_t size() const = 0;
-    virtual uint32_t do_write(uint8_t *buffer) const = 0;
-    virtual bool matches(const std::string &dname) const { return false; }
-    virtual DNSRRImpl *clone() const = 0;
-};
-
-/**
- * \brief Abstracts a DNS resource record.
- */
-class DNSResourceRecord {
-public:
-    /**
-     * \brief The type used to store resource records' information.
-     */
-    TINS_BEGIN_PACK
-    struct info {
-        uint16_t type, qclass;
-        uint32_t ttl;
-        
-        info(uint16_t tp, uint16_t qc, uint32_t tm) 
-          : type(tp), qclass(qc), ttl(tm) { }
-        
-        info() : type(), qclass(), ttl() {}
-    } TINS_END_PACK;
-    
-    /**
-     * \brief Constructs a record.
-     * \param impl A pointer to the impl object.
-     * \param data A pointer to the start of the data buffer.
-     * \param len The length of the data.
-     */
-    DNSResourceRecord(DNSRRImpl *impl = 0, const uint8_t *data = 0, uint16_t len = 0);
-    
-    /**
-     * \brief Constructs a record.
-     * 
-     * If the input data is malformed, a malformed_packet exception
-     * is thrown.
-     * 
-     * \param buffer A pointer to the start of the data buffer.
-     * \param len The length of the data.
-     */
-    DNSResourceRecord(const uint8_t *buffer, uint32_t size);
-    
-    /**
-     * \brief Constructs a record from an input range.
-     * \param impl A pointer to the impl object.
-     * \param start The begining of the range.
-     * \param end The end of the range.
-     */
-    template<typename ForwardIterator>
-    DNSResourceRecord(DNSRRImpl *impl, ForwardIterator start, ForwardIterator end) 
-    : impl(impl), data(start, end)
-    {  }
-    
-    /**
-     * \brief Copy constructor.
-     * 
-     * This handles cloning the impl object.
-     * \param rhs The record which will be copied.
-     */
-    DNSResourceRecord(const DNSResourceRecord &rhs);
-    
-    /**
-     * \brief Copy assignment operator.
-     * 
-     * This handles cloning the impl object.
-     * \param rhs The record which will be copied.
-     */
-    DNSResourceRecord& operator=(const DNSResourceRecord &rhs);
-    
-    #if TINS_IS_CXX11
-        /**
-         * Move constructor.
-         */
-        DNSResourceRecord(DNSResourceRecord &&rhs) noexcept 
-        : info_(rhs.info_), data(std::move(rhs.data)), impl(0) {
-            std::swap(impl, rhs.impl);
-        }
-        
-        /**
-         * Move assignment operator.
-         */
-        DNSResourceRecord& operator=(DNSResourceRecord &&rhs) noexcept 
-        {
-            info_ = rhs.info_;
-            data = std::move(rhs.data);
-            delete impl;
-            impl = 0;
-            std::swap(impl, rhs.impl);
-            return *this;
-        }
-    #endif // TINS_IS_CXX11
-    
-    /**
-     * \brief Destructor.
-     * 
-     * This frees the impl object.
-     */
-    ~DNSResourceRecord();
-
-    /**
-     * \brief Writes this record to a buffer.
-     * 
-     * \param buffer The buffer in which to store the serialization.
-     * \return uint32_t containing the number of bytes written.
-     */
-    uint32_t write(uint8_t *buffer) const;
-    
-    /**
-     * \brief Returns the size of the data in this record.
-     */
-    uint32_t data_size() const {
-        return data.size();
-    }
-    
-    /**
-     * \brief Returns the pointer to the start of the data buffer.
-     */
-    const uint8_t *data_ptr() const {
-        return &data[0];
-    }
-    
-    /**
-     * \brief Returns a bool indicating whether this record contains
-     * a domain name as the name being resolved.
-     */
-    bool has_domain_name() const;
-    
-    /**
-     * \brief Returns a pointer to the domain name stored in this record.
-     * 
-     * This will throw a std::bad_cast exception if the impl object is
-     * not of the type NamedDNSRRImpl.
-     */
-    const std::string *dname() const;
-    
-    /**
-     * \brief Returns the offset stored in this record.
-     * 
-     * This will throw a std::bad_cast exception if the impl object is
-     * not of the type OffsetedDNSRRImpl.
-     */
-    uint16_t offset() const;
-    
-    /**
-     * \brief Returns the size of this record.
-     */
-    uint32_t size() const;
-    
-    /**
-     * \brief Returns a reference to the info field.
-     */
-    info &information() {
-        return info_;
-    }
-    
-    /**
-     * \brief Returns a const reference to the info field.
-     */
-    const info &information() const {
-        return info_;
-    }
-    
-    /**
-     * \brief Checks if the domain name stored in this record matches
-     * the given one.
-     * 
-     * This is a shortcut 
-     */
-    bool matches(const std::string &dname) const;
-private:
-    DNSRRImpl *clone_impl() const;
-    size_t impl_size() const;
-
-    info info_;
-    std::vector<uint8_t> data;
-    DNSRRImpl *impl;
-};
-
-class OffsetedDNSRRImpl : public DNSRRImpl {
-public:
-    OffsetedDNSRRImpl(uint16_t off);
-    
-    uint32_t do_write(uint8_t *buffer) const;
-    uint32_t size() const;
-    OffsetedDNSRRImpl *clone() const;
-    uint16_t offset() const;
-private:
-    uint16_t offset_;
-};
-
-class NamedDNSRRImpl : public DNSRRImpl {
-public:
-    NamedDNSRRImpl(const std::string &nm);
-    
-    template<typename ForwardIterator>
-    NamedDNSRRImpl(ForwardIterator start, ForwardIterator end)
-    : name(start, end) 
-    { }
-    
-    uint32_t do_write(uint8_t *buffer) const;
-    
-    uint32_t size() const;
-    
-    bool matches(const std::string &dname) const;
-    
-    const std::string *dname_pointer() const;
-    NamedDNSRRImpl *clone() const;
-private:
-    std::string name;
-};
-
-/** 
- * \endcond
- */
-
-inline DNSResourceRecord make_offseted_record(uint16_t offset, const uint8_t *data = 0, uint32_t size = 0) {
-    return DNSResourceRecord(new OffsetedDNSRRImpl(offset), data, size);
-}
-
-inline DNSResourceRecord make_named_record(const std::string &name, const uint8_t *data = 0, uint32_t size = 0) {
-    return DNSResourceRecord(new NamedDNSRRImpl(name), data, size);
-}
-}
-
-#endif // TINS_DNS_RECORD_H

include/dot11.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,9 @@
  *
  */
 
-#ifndef TINS_DOT_11
+#include "config.h"
+
+#if !defined(TINS_DOT_11) && defined(HAVE_DOT11)
 #define TINS_DOT_11
 
 #include "dot11/dot11_base.h"

include/dot11/CMakeLists.txt

@@ -0,0 +1,6 @@
+FILE(GLOB INCLUDE_FILES "*.h")
+INSTALL(
+    FILES ${INCLUDE_FILES} 
+    DESTINATION include/tins/dot11
+    COMPONENT Headers
+)

include/dot11/dot11_assoc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,9 @@
  *
  */
 
-#ifndef TINS_DOT11_DOT11_ASSOC_H
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_ASSOC_H) && defined(HAVE_DOT11)
 #define TINS_DOT11_DOT11_ASSOC_H
 
 #include "../dot11/dot11_mgmt.h"

include/dot11/dot11_auth.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,9 @@
  *
  */
 
-#ifndef TINS_DOT11_DOT11_AUTH_H
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_AUTH_H) && defined(HAVE_DOT11)
 #define TINS_DOT11_DOT11_AUTH_H
 
 #include "../dot11/dot11_mgmt.h"

include/dot11/dot11_base.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,9 @@
  *
  */ 
 
-#ifndef TINS_DOT11_DOT11_H
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_H) && defined(HAVE_DOT11)
 #define TINS_DOT11_DOT11_H
 
 #include <list>
@@ -55,7 +57,7 @@ public:
     /**
      * \brief IEEE 802.11 options struct.
      */
-    typedef PDUOption<uint8_t> option;
+    typedef PDUOption<uint8_t, Dot11> option;
 
     /**
      * The type used to store tagged options.
@@ -72,6 +74,11 @@ public:
      */
     static const address_type BROADCAST;
 
+    /**
+     * The endianness used by Dot11.
+     */
+    static const endian_type endianness = LE;
+
     /**
      * \brief Enum for the different types of 802.11 frames.
      *

include/dot11/dot11_beacon.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,9 @@
  *
  */    
 
-#ifndef TINS_DOT11_DOT11_BEACON_H
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_BEACON_H) && defined(HAVE_DOT11)
 #define TINS_DOT11_DOT11_BEACON_H
 
 #include "../dot11/dot11_mgmt.h"

include/dot11/dot11_control.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,10 @@
  *
  */
 
-#ifndef TINS_DOT11_DOT11_CONTROL_H
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_CONTROL_H) && defined(HAVE_DOT11)
+
 #define TINS_DOT11_DOT11_CONTROL_H
 
 #include "../dot11/dot11_base.h"

include/dot11/dot11_data.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,9 @@
  *
  */
 
-#ifndef TINS_DOT11_DOT11_DATA_H
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_DATA_H) && defined(HAVE_DOT11)
 #define TINS_DOT11_DOT11_DATA_H
 
 #include "../dot11/dot11_base.h"

include/dot11/dot11_mgmt.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,10 @@
  *
  */
 
-#ifndef TINS_DOT11_DOT11_MGMT_H
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_MGMT_H) && defined(HAVE_DOT11)
+
 #define TINS_DOT11_DOT11_MGMT_H
 
 #include <vector>
@@ -376,6 +379,8 @@ public:
           uint8_t hop_pattern, uint8_t hop_index) 
         : dwell_time(dwell_time), hop_set(hop_set), 
           hop_pattern(hop_pattern), hop_index(hop_index) {}
+
+        static fh_params_set from_option(const option &opt);
     };
     
     /**
@@ -392,6 +397,8 @@ public:
         : cfp_count(cfp_count), cfp_period(cfp_period), 
           cfp_max_duration(cfp_max_duration), 
           cfp_dur_remaining(cfp_dur_remaining) {}
+
+        static cf_params_set from_option(const option &opt);
     };
     
     /**
@@ -410,6 +417,8 @@ public:
           uint8_t recovery_interval, const channels_type &channels)
         : dfs_owner(addr), recovery_interval(recovery_interval),
           channel_map(channels) {}
+
+        static ibss_dfs_params from_option(const option &opt);
     };
     
     /**
@@ -428,6 +437,8 @@ public:
           const byte_array &number, const byte_array &max) 
         : country(country), first_channel(first), number_channels(number),
           max_transmit_power(max) {}
+
+        static country_params from_option(const option &opt);
     };
     
     /**
@@ -445,6 +456,8 @@ public:
           uint8_t offset, const byte_array& table) 
         : flag(flag), number_of_sets(sets), modulus(modulus), 
           offset(offset), random_table(table) {}
+
+        static fh_pattern_type from_option(const option &opt);
     };
     
     /**
@@ -457,6 +470,8 @@ public:
         
         channel_switch_type(uint8_t mode, uint8_t channel, uint8_t count)
         : switch_mode(mode), new_channel(channel), switch_count(count) { }
+
+        static channel_switch_type from_option(const option &opt);
     };
     
     /**
@@ -472,6 +487,8 @@ public:
           uint16_t offset)
         : quiet_count(count), quiet_period(period), 
         quiet_duration(duration), quiet_offset(offset) {}
+
+        static quiet_type from_option(const option &opt);
     };
 
     /**
@@ -488,6 +505,8 @@ public:
           uint16_t capacity) 
         : station_count(count), available_capacity(capacity),
         channel_utilization(utilization) {}
+
+        static bss_load_type from_option(const option &opt);
     };
     
     /**
@@ -503,6 +522,8 @@ public:
           const byte_array &bitmap) 
         : dtim_count(count), dtim_period(period), bitmap_control(control),
         partial_virtual_bitmap(bitmap) {}
+
+        static tim_type from_option(const option &opt);
     };
 
     /**
@@ -521,6 +542,11 @@ public:
         static vendor_specific_type from_bytes(const uint8_t *buffer, uint32_t sz);
     };
     
+    /**
+     * The type used to store the QOS capability tagged option data.
+     */
+    typedef uint8_t qos_capability_type;
+
     /**
      * \brief Getter for the second address.
      *
@@ -638,7 +664,7 @@ public:
      *
      * \param new_qos_capabilities uint8_t with the capabilities.
      */
-    void qos_capability(uint8_t new_qos_capability);
+    void qos_capability(qos_capability_type new_qos_capability);
 
     /**
      * \brief Helper method to set the power capabilities option.
@@ -848,7 +874,7 @@ public:
      * 
      * \return uint8_t containing the QOS capability.
      */
-    uint8_t qos_capability() const;
+    qos_capability_type qos_capability() const;
 
     /**
      * \brief Helper method to get the power capability.
@@ -1118,6 +1144,14 @@ private:
     static uint8_t *serialize_rates(const rates_type &rates);
     static rates_type deserialize_rates(const option *option);
     
+    template<typename T>
+    T search_and_convert(OptionTypes opt_type) const {
+        const option *opt = search_option(opt_type);
+        if(!opt)
+            throw option_not_found();
+        return opt->to<T>();
+    }
+
     ExtendedHeader _ext_header;
     address_type _addr4;
 };

include/dot11/dot11_probe.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,10 @@
  *
  */
 
-#ifndef TINS_DOT11_DOT11_PROBE_H
+#include "../config.h"
+
+#if !defined(TINS_DOT11_DOT11_PROBE_H) && defined(HAVE_DOT11)
+
 #define TINS_DOT11_DOT11_PROBE_H
 
 #include "../dot11/dot11_mgmt.h"

include/dot1q.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/dot3.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/eapol.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/endianness.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -55,6 +55,16 @@
 
 namespace Tins {
 namespace Endian {
+    /** 
+     * \brief "Changes" a 8-bit integral value's endianess. This is an
+     * identity function.
+     *
+     * \param data The data to convert.
+     */
+    inline uint8_t do_change_endian(uint8_t data) {
+        return data;
+    }
+    
     /** 
      * \brief Changes a 16-bit integral value's endianess.
      *
@@ -100,6 +110,11 @@ namespace Endian {
     template<size_t>
     struct conversion_dispatcher;
     
+    template<>
+    struct conversion_dispatcher<sizeof(uint8_t)> 
+    : public conversion_dispatch_helper<uint8_t> 
+    { };
+    
     template<>
     struct conversion_dispatcher<sizeof(uint16_t)> 
     : public conversion_dispatch_helper<uint16_t> 

include/ethernetII.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/exceptions.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -30,6 +30,7 @@
 #ifndef TINS_EXCEPTIONS_H
 #define TINS_EXCEPTIONS_H
 
+#include <string>
 #include <stdexcept>
 
 namespace Tins {
@@ -145,6 +146,28 @@ public:
         return "Malformed option";
     }
 };
-}
+
+/**
+ * \brief Exception thrown when a call to tins_cast fails.
+ */
+class bad_tins_cast : public std::exception {
+public:
+    const char *what() const throw() {
+        return "Bad Tins cast";
+    }
+};
+
+/**
+ * \brief Exception thrown when sniffing a protocol that
+ * has been disabled at compile time.
+ */
+class protocol_disabled : public std::exception {
+public:
+    const char *what() const throw() {
+        return "Protocol disabled";
+    }
+};
+
+} // Tins
 
 #endif // TINS_EXCEPTIONS_H

include/handshake_capturer.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,7 +27,9 @@
  *
  */
 
-#ifndef TINS_HANDSHAKE_CAPTURER_H
+#include "config.h"
+
+#if !defined(TINS_HANDSHAKE_CAPTURER_H)  && defined(HAVE_DOT11)
 #define TINS_HANDSHAKE_CAPTURER_H
 
 #include <vector>

include/hw_address.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/icmp.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -30,9 +30,22 @@
 #ifndef TINS_ICMP_H
 #define TINS_ICMP_H
 
+// Windows likes to define macros with not-so-common-names, which break
+// this code
+#ifdef WIN32
+    #ifdef TIMESTAMP_REQUEST
+        #undef TIMESTAMP_REQUEST
+    #endif // TIMESTAMP_REQUEST
+
+    #ifdef TIMESTAMP_REPLY
+        #undef TIMESTAMP_REPLY
+    #endif // TIMESTAMP_REPLY
+#endif // WIN32
+
 #include "macros.h"
 #include "pdu.h"
 #include "endianness.h"
+#include "ip_address.h"
 
 namespace Tins {
 
@@ -48,6 +61,11 @@ namespace Tins {
          */
         static const PDU::PDUType pdu_flag = PDU::ICMP;
     
+        /**
+         * The type used to store addresses.
+         */
+        typedef IPv4Address address_type;
+
         /** \brief ICMP flags
          */
         enum Flags {
@@ -58,8 +76,12 @@ namespace Tins {
             ECHO_REQUEST     = 8,
             TIME_EXCEEDED    = 11,
             PARAM_PROBLEM    = 12,
+            TIMESTAMP_REQUEST = 13,
+            TIMESTAMP_REPLY  = 14,
             INFO_REQUEST     = 15,
-            INFO_REPLY       = 16
+            INFO_REPLY       = 16,
+            ADDRESS_MASK_REQUEST = 17,
+            ADDRESS_MASK_REPLY = 18
         };
 
         /**
@@ -113,9 +135,9 @@ namespace Tins {
         /**
          * \brief Setter for the gateway field.
          *
-         * \param new_gw uint32_t with the new gateway.
+         * \param new_gw The new value for the gateway field.
          */
-        void gateway(uint32_t new_gw);
+        void gateway(address_type new_gw);
 
         /**
          * \brief Setter for the mtu field.
@@ -131,6 +153,34 @@ namespace Tins {
          */
         void pointer(uint8_t new_pointer);
 
+        /**
+         * \brief Setter for the original timestamp field.
+         *
+         * \param new_timestamp the value to be set.
+         */
+        void original_timestamp(uint32_t new_timestamp);
+
+        /**
+         * \brief Setter for the receive timestamp field.
+         *
+         * \param new_timestamp the value to be set.
+         */
+        void receive_timestamp(uint32_t new_timestamp);
+
+        /**
+         * \brief Setter for the transmit timestamp field.
+         *
+         * \param new_timestamp the value to be set.
+         */
+        void transmit_timestamp(uint32_t new_timestamp);
+
+        /**
+         * \brief Setter for the address mask field.
+         *
+         * \param new_mask the value to be set.
+         */
+        void address_mask(address_type new_mask);
+
         /**
          * \brief Sets echo request flag for this PDU.
          *
@@ -199,7 +249,7 @@ namespace Tins {
          * \param address Address of the gateway to which traffic should
          * be sent.
          */
-        void set_redirect(uint8_t icode, uint32_t address);
+        void set_redirect(uint8_t icode, address_type address);
 
         /**
          * \brief Getter for the ICMP type flag.
@@ -220,7 +270,7 @@ namespace Tins {
          *
          * \return Returns the checksum as an unit16_t.
          */
-        uint16_t check() const { return Endian::be_to_host(_icmp.check); }
+        uint16_t checksum() const { return Endian::be_to_host(_icmp.check); }
 
         /**
          * \brief Getter for the echo id.
@@ -239,24 +289,56 @@ namespace Tins {
         /**
          * \brief Getter for the gateway field.
          *
-         * \return Returns the gateways in an unit32_t.
+         * \return Returns the gateway field value.
          */
-         uint32_t gateway() const { return Endian::be_to_host(_icmp.un.gateway); }
+        address_type gateway() const { 
+            return address_type(Endian::be_to_host(_icmp.un.gateway)); 
+        }
 
          /**
           * \brief Getter for the pointer field.
           *
-          * \return Returns the pointer value.
+          * \return Returns the pointer field value.
           */
         uint8_t pointer() const { return this->_icmp.un.pointer; }
         
         /**
           * \brief Getter for the mtu field.
           *
-          * \return Returns the mtu value in an uint16_t.
+          * \return Returns the mtu field value.
           */
         uint16_t mtu() const { return Endian::be_to_host(_icmp.un.frag.mtu); }
 
+        /**
+          * \brief Getter for the original timestamp field.
+          *
+          * \return Returns the original timestamp value.
+          */
+        uint32_t original_timestamp() const { return Endian::be_to_host(_orig_timestamp_or_address_mask); }
+
+        /**
+          * \brief Getter for the receive timestamp field.
+          *
+          * \return Returns the receive timestamp value.
+          */
+        uint32_t receive_timestamp() const { return Endian::be_to_host(_recv_timestamp); }
+
+        /**
+          * \brief Getter for the transmit timestamp field.
+          *
+          * \return Returns the transmit timestamp value.
+          */
+        uint32_t transmit_timestamp() const { return Endian::be_to_host(_trans_timestamp); }
+
+        /**
+          * \brief Getter for the address mask field.
+          *
+          * \return Returns the address mask value.
+          */
+        address_type address_mask() const { 
+            return address_type(Endian::be_to_host(_orig_timestamp_or_address_mask)); 
+        }
+
         /**
          * \brief Returns the header size.
          *
@@ -307,7 +389,7 @@ namespace Tins {
             } un;
         } TINS_END_PACK;
 
-        void check(uint16_t new_check);
+        void checksum(uint16_t new_check);
         
         /** \brief Serialices this ICMP PDU.
          * \param buffer The buffer in which the PDU will be serialized.
@@ -317,6 +399,7 @@ namespace Tins {
         void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *parent);
 
         icmphdr _icmp;
+        uint32_t _orig_timestamp_or_address_mask, _recv_timestamp, _trans_timestamp;
     };
 }
 

include/icmpv6.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -135,7 +135,7 @@ public:
     /**
      * The type used to represent ICMPv6 options.
      */
-    typedef PDUOption<uint8_t> option;
+    typedef PDUOption<uint8_t, ICMPv6> option;
     
     /**
      * The type used to store options.
@@ -145,30 +145,53 @@ public:
     /**
      * \brief The type used to store the new home agent information 
      * option data.
-     * 
-     * The first member contains the home agent preference field, while
-     * the second one contains the home agent lifetime.
      */
-    typedef std::pair<uint16_t, uint16_t> new_ha_info_type;
+    typedef std::vector<uint16_t> new_ha_info_type;
     
     /**
      * The type used to store the source/target address list options.
      */
-    typedef std::vector<ipaddress_type> addr_list_type;
+    struct addr_list_type {
+        typedef std::vector<ipaddress_type> addresses_type;
+        
+        uint8_t reserved[6];
+        addresses_type addresses;
+        
+        addr_list_type(const addresses_type &addresses = addresses_type())
+        : addresses(addresses) 
+        {
+            std::fill(reserved, reserved + sizeof(reserved), 0);
+        }
+        
+        static addr_list_type from_option(const option &opt);
+    };
     
     /**
      * The type used to store the nonce option data.
      */
     typedef std::vector<uint8_t> nonce_type;
     
+    /**
+     * The type used to store the MTU option.
+     */
+    typedef std::pair<uint16_t, uint32_t> mtu_type;
+    
     /**
      * \brief The type used to store the neighbour advertisement 
      * acknowledgement option data.
-     * 
-     * The first member contains the option code field, while
-     * the second one contains the status.
      */
-    typedef std::pair<uint8_t, uint8_t> naack_type;
+    struct naack_type {
+        uint8_t code, status;
+        uint8_t reserved[4];
+        
+        naack_type(uint8_t code = 0, uint8_t status = 0)
+        : code(code), status(status)
+        {
+            std::fill(reserved, reserved + 4, 0);
+        }
+        
+        static naack_type from_option(const option &opt);
+    };
     
     /**
      * \brief The type used to store the link layer address option data.
@@ -207,6 +230,8 @@ public:
         {
             
         }
+        
+        static lladdr_type from_option(const option &opt);
     };
     
     /**
@@ -226,6 +251,8 @@ public:
         : prefix_len(prefix_len), A(A), L(L), 
           valid_lifetime(valid_lifetime), preferred_lifetime(preferred_lifetime),
           prefix(prefix) { }
+          
+        static prefix_info_type from_option(const option &opt);
     };
     
     /**
@@ -290,6 +317,8 @@ public:
         {
             std::fill(key_hash, key_hash + sizeof(key_hash), 0);
         }
+
+        static rsa_sign_type from_option(const option &opt);
     };
     
     /**
@@ -303,6 +332,8 @@ public:
           const ipaddress_type &address = ipaddress_type())
         : option_code(option_code), prefix_len(prefix_len), address(address)
         {}
+
+        static ip_prefix_type from_option(const option &opt);
     };
     
     /**
@@ -319,6 +350,8 @@ public:
           const ipaddress_type &address = ipaddress_type())
         : dist(dist), pref(pref), r(r), valid_lifetime(valid_lifetime),
           address(address) { }
+
+        static map_type from_option(const option &opt);
     };
     
     /**
@@ -336,6 +369,8 @@ public:
           uint32_t route_lifetime = 0, const prefix_type &prefix = prefix_type())
         : prefix_len(prefix_len), pref(pref), route_lifetime(route_lifetime),
           prefix(prefix) { }
+
+        static route_info_type from_option(const option &opt);
     };
     
     /**
@@ -350,6 +385,8 @@ public:
         recursive_dns_type(uint32_t lifetime = 0, 
           const servers_type &servers = servers_type())
         : lifetime(lifetime), servers(servers) {}
+
+        static recursive_dns_type from_option(const option &opt);
     };
     
     /**
@@ -364,6 +401,8 @@ public:
         handover_key_req_type(small_uint<4> AT = 0,
           const key_type &key = key_type())
         : AT(AT), key(key) { }
+
+        static handover_key_req_type from_option(const option &opt);
     };
     
     /**
@@ -375,6 +414,8 @@ public:
         handover_key_reply_type(uint16_t lifetime = 0, small_uint<4> AT = 0,
           const key_type &key = key_type())
         : handover_key_req_type(AT, key), lifetime(lifetime) { }
+
+        static handover_key_reply_type from_option(const option &opt);
     };
     
     /**
@@ -389,6 +430,8 @@ public:
         handover_assist_info_type(uint8_t option_code=0, 
           const hai_type &hai = hai_type())
         : option_code(option_code), hai(hai) { }
+
+        static handover_assist_info_type from_option(const option &opt);
     };
     
     /**
@@ -403,6 +446,8 @@ public:
         mobile_node_id_type(uint8_t option_code=0, 
           const mn_type &mn = mn_type())
         : option_code(option_code), mn(mn) { }
+
+        static mobile_node_id_type from_option(const option &opt);
     };
     
     /**
@@ -417,6 +462,56 @@ public:
         dns_search_list_type(uint32_t lifetime = 0,
           const domains_type &domains = domains_type())
         : lifetime(lifetime), domains(domains) { }
+
+        static dns_search_list_type from_option(const option &opt);
+    };
+
+    /**
+     * The type used to store the timestamp option.
+     */
+    struct timestamp_type {
+        uint8_t reserved[6];
+        uint64_t timestamp;
+
+        timestamp_type(uint64_t timestamp = 0)
+        : timestamp(timestamp)
+        {
+            std::fill(reserved, reserved + sizeof(reserved), 0);
+        }
+
+        static timestamp_type from_option(const option &opt);
+    };
+
+    /**
+     * The type used to store the shortcut limit option.
+     */
+    struct shortcut_limit_type {
+        uint8_t limit, reserved1;
+        uint32_t reserved2;
+
+        shortcut_limit_type(uint8_t limit = 0)
+        : limit(limit), reserved1(), reserved2()
+        {
+
+        }
+
+        static shortcut_limit_type from_option(const option &opt);
+    };
+
+    /**
+     * The type used to store new advertisement interval option.
+     */
+    struct new_advert_interval_type {
+        uint16_t reserved;
+        uint32_t interval;
+
+        new_advert_interval_type(uint32_t interval = 0)
+        : reserved(), interval(interval)
+        {
+
+        }
+
+        static new_advert_interval_type from_option(const option &opt);
     };
 
     /**
@@ -820,33 +915,30 @@ public:
     /**
      * \brief Setter for the redirect header option.
      * 
-     * This method appends the 6 reserved bytes and inserts the 
-     * necessary padding at the end.
-     * 
      * \param data The redirect header option data.
      */
-    void redirect_header(PDU::serialization_type data);
+    void redirect_header(const byte_array &data);
     
     /**
      * \brief Setter for the MTU option.
      * 
      * \param value The MTU option data.
      */
-    void mtu(uint32_t value);
+    void mtu(const mtu_type& value);
     
     /**
      * \brief Setter for the shortcut limit option.
      * 
      * \param value The shortcut limit option data.
      */
-    void shortcut_limit(uint8_t value);
+    void shortcut_limit(const shortcut_limit_type& value);
     
     /**
      * \brief Setter for the new advertisement interval option.
      * 
      * \param value The new advertisement interval option data.
      */
-    void new_advert_interval(uint32_t value);
+    void new_advert_interval(const new_advert_interval_type &value);
     
     /**
      * \brief Setter for the new home agent information option.
@@ -881,7 +973,7 @@ public:
      * 
      * \param value The new timestamp option data.
      */
-    void timestamp(uint64_t value);
+    void timestamp(const timestamp_type &value);
     
     /**
      * \brief Setter for the new nonce option.
@@ -1001,7 +1093,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    PDU::serialization_type redirect_header() const;
+    byte_array redirect_header() const;
     
     /**
      * \brief Getter for the MTU option.
@@ -1009,7 +1101,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    uint32_t mtu() const;
+    mtu_type mtu() const;
     
     /**
      * \brief Getter for the shortcut limit option.
@@ -1017,7 +1109,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    uint8_t shortcut_limit() const;
+    shortcut_limit_type shortcut_limit() const;
     
     /**
      * \brief Getter for the new advertisement interval option.
@@ -1025,7 +1117,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    uint32_t new_advert_interval() const;
+    new_advert_interval_type new_advert_interval() const;
     
     /**
      * \brief Getter for the new home agent information option.
@@ -1065,7 +1157,7 @@ public:
      * This method will throw an option_not_found exception if the
      * option is not found.
      */
-    uint64_t timestamp() const;
+    timestamp_type timestamp() const;
     
     /**
      * \brief Getter for the nonce option.
@@ -1225,6 +1317,14 @@ private:
         return option;
     }
 
+    template<typename T>
+    T search_and_convert(OptionTypes type) const {
+        const option *opt = search_option(type);
+        if(!opt)
+            throw option_not_found();
+        return opt->to<T>();
+    }
+
     icmp6hdr _header;
     ipaddress_type _target_address, _dest_address;
     options_type _options;

include/ieee802_3.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/internals.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -57,7 +57,7 @@ public:
     
     template<typename InputIterator>
     byte_array(InputIterator start, InputIterator last) {
-        std::copy(start, end, data);
+        std::copy(start, last, data);
     }
     
     template<typename InputIterator>
@@ -99,22 +99,24 @@ private:
 void skip_line(std::istream &input);
 bool from_hex(const std::string &str, uint32_t &result);
 
-template<bool, typename>
+template<bool, typename T = void>
 struct enable_if {
-    
+    typedef T type;
 };
 
 template<typename T>
-struct enable_if<true, T> {
+struct enable_if<false, T> {
-    typedef T type;
+    
 };
 
 PDU *pdu_from_flag(Constants::Ethernet::e flag, const uint8_t *buffer, 
   uint32_t size, bool rawpdu_on_no_match = true);
-
+PDU *pdu_from_flag(Constants::IP::e flag, const uint8_t *buffer, 
+  uint32_t size, bool rawpdu_on_no_match = true);
 PDU *pdu_from_flag(PDU::PDUType type, const uint8_t *buffer, uint32_t size);
 
 Constants::Ethernet::e pdu_flag_to_ether_type(PDU::PDUType flag);
+Constants::IP::e pdu_flag_to_ip_type(PDU::PDUType flag);
 
 template<typename T>
 bool increment_buffer(T &addr) {
@@ -171,6 +173,31 @@ HWAddress<n> last_address_from_mask(HWAddress<n> addr, const HWAddress<n> &mask)
 inline bool is_dot3(const uint8_t *ptr, size_t sz) {
     return (sz >= 13 && ptr[12] < 8);
 }
+
+template<typename T>
+struct is_unsigned_integral {
+    static const bool value = false;
+};
+
+template<>
+struct is_unsigned_integral<uint8_t> {
+    static const bool value = true;
+};
+
+template<>
+struct is_unsigned_integral<uint16_t> {
+    static const bool value = true;
+};
+
+template<>
+struct is_unsigned_integral<uint32_t> {
+    static const bool value = true;
+};
+
+template<>
+struct is_unsigned_integral<uint64_t> {
+    static const bool value = true;
+};
 } // namespace Internals
 } // namespace Tins
 /**

include/ip.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -169,7 +169,7 @@ namespace Tins {
         /**
          * The IP options type.
          */
-        typedef PDUOption<option_identifier> option;
+        typedef PDUOption<option_identifier, IP> option;
 
         /**
          * The type of the security option.
@@ -184,6 +184,8 @@ namespace Tins {
             : security(sec), compartments(comp), 
               handling_restrictions(hand_res), transmission_control(tcc) 
               {}
+            
+            static security_type from_option(const option &opt);
         };
         
         /**
@@ -198,6 +200,8 @@ namespace Tins {
             generic_route_option_type(uint8_t ptr = 0, 
               routes_type rts = routes_type())
             : pointer(ptr), routes(rts) {}
+            
+            static generic_route_option_type from_option(const option &opt);
         };
         
         /**
@@ -364,6 +368,17 @@ namespace Tins {
         /**
          * \brief Setter for the protocol field.
          *
+         * Note that this protocol will be overwritten using the 
+         * inner_pdu's protocol type during serialization unless the IP 
+         * datagram is fragmented. 
+         * 
+         * If the packet is fragmented and was originally sniffed, the
+         * original protocol type will be kept when serialized.
+         * 
+         * If this packet has been crafted manually and the inner_pdu
+         * is, for example, a RawPDU, then setting the protocol yourself
+         * is necessary.
+         * 
          * \param new_protocol The new protocol.
          */
         void protocol(uint8_t new_protocol);
@@ -411,6 +426,20 @@ namespace Tins {
                 internal_add_option(opt);
                 _ip_options.push_back(std::move(opt));
             }
+
+            /**
+             * \brief Adds an IP option.
+             * 
+             * The option is constructed from the provided parameters.
+             * 
+             * \param args The arguments to be used in the option's 
+             * constructor.
+             */
+            template<typename... Args>
+            void add_option(Args&&... args) {
+                _ip_options.emplace_back(std::forward<Args>(args)...);
+                internal_add_option(_ip_options.back());
+            }
         #endif
 
         /**
@@ -568,6 +597,13 @@ namespace Tins {
          */
         PDU *recv_response(PacketSender &sender, const NetworkInterface &);
 
+        /**
+         * Indicates whether this PDU is fragmented.
+         *
+         * \return true if this PDU is fragmented, false otherwise.
+         */
+        bool is_fragmented() const;
+
         /**
          * \brief Getter for the PDU's type.
          * \sa PDU::pdu_type

include/ip_address.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/ip_reassembler.h

@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TINS_IP_REASSEMBLER_H
+#define TINS_IP_REASSEMBLER_H
+
+#include <vector>
+#include <map>
+#include "pdu.h"
+#include "ip_address.h"
+
+namespace Tins {
+/** 
+ * \cond
+ */
+class IP;
+namespace Internals {
+class IPv4Fragment {
+public:
+    typedef PDU::serialization_type payload_type;
+
+    IPv4Fragment() : offset_() { }
+
+    template<typename T>
+    IPv4Fragment(T *pdu, uint16_t offset)
+    : payload_(pdu->serialize()), offset_(offset) 
+    {
+        
+    }
+    
+    const payload_type &payload() const {
+        return payload_;
+    }
+    
+    uint16_t offset() const {
+        return offset_;
+    }
+private:
+    payload_type payload_;
+    uint16_t offset_;
+};
+
+class IPv4Stream {
+public:
+    IPv4Stream();
+    
+    void add_fragment(IP *ip);
+    bool is_complete() const;
+    PDU *allocate_pdu() const;
+private:
+    typedef std::vector<IPv4Fragment> fragments_type;
+    
+    uint16_t extract_offset(const IP *ip);
+    bool extract_more_frag(const IP *ip);
+
+    fragments_type fragments;
+    bool received_end;
+    uint8_t transport_proto;
+    size_t received_size, total_size;
+};
+} // namespace Internals
+
+/** 
+ * \endcond
+ */
+
+/**
+ * \brief Reassembles fragmented IP packets.
+ */
+class IPv4Reassembler {
+public:
+    /**
+     * The status of each processed packet.
+     */
+    enum packet_status {
+        NOT_FRAGMENTED,
+        FRAGMENTED,
+        REASSEMBLED
+    };
+
+    /**
+     * The type used to represent the overlapped segment 
+     * reassembly technique to be used.
+     */
+    enum overlapping_technique {
+        NONE
+    };
+
+    /**
+     * Constructs an IPV4Reassembler.
+     * \param technique The technique to be used for reassembling
+     * overlapped fragments.
+     */
+    IPv4Reassembler(overlapping_technique technique = NONE);
+
+    /**
+     * \brief Processes a PDU and tries to reassemble it.
+     *
+     * This method tries to reassemble the provided packet. If
+     * the packet is successfully reassembled using previously
+     * processed packets, its contents will be modified so that
+     * it contains the whole payload and not just a fragment.
+     * 
+     * \param pdu The PDU to process.
+     * \return NOT_FRAGMENTED if the PDU does not contain an IP
+     * layer or is not fragmented, FRAGMENTED if the packet is 
+     * fragmented or REASSEMBLED if the packet was fragmented 
+     * but has now been reassembled.
+     */
+    packet_status process(PDU &pdu);
+
+    /**
+     * Removes all of the packets and data stored.
+     */
+    void clear_streams();
+
+    /**
+     * \brief Removes all of the packets and data stored that 
+     * belongs to IP headers whose identifier, source and destination
+     * addresses are equal to the provided parameters.
+     * 
+     * \param id The idenfier to search.
+     * \param addr1 The source address to search.
+     * \param addr2 The destinatin address to search.
+     * \sa IP::id
+     */
+    void remove_stream(uint16_t id, IPv4Address addr1, IPv4Address addr2);
+private:
+    typedef std::pair<IPv4Address, IPv4Address> address_pair;
+    typedef std::pair<uint16_t, address_pair> key_type;
+    typedef std::map<key_type, Internals::IPv4Stream> streams_type;
+
+    key_type make_key(const IP *ip) const;
+    address_pair make_address_pair(IPv4Address addr1, IPv4Address addr2) const;
+    
+    streams_type streams;
+    overlapping_technique technique;
+};
+
+/**
+ * Proxy functor class that reassembles PDUs.
+ */
+template<typename Functor>
+class IPv4ReassemblerProxy {
+public:
+    /**
+     * Constructs the proxy from a functor object.
+     *
+     * \param func The functor object.
+     */
+    IPv4ReassemblerProxy(Functor func)
+    : functor_(func)
+    {
+
+    }
+
+    /**
+     * \brief Tries to reassemble the packet and forwards it to 
+     * the functor.
+     * 
+     * \param pdu The packet to process
+     * \return true if the packet wasn't forwarded, otherwise
+     * the value returned by the functor.
+     */
+    bool operator()(PDU &pdu) {
+        // Forward it unless it's fragmented.
+        if(reassembler.process(pdu) != IPv4Reassembler::FRAGMENTED)
+            return functor_(pdu);
+        else
+            return true;
+    }
+private:
+    IPv4Reassembler reassembler;
+    Functor functor_;
+};
+
+/**
+ * Helper function that creates an IPv4ReassemblerProxy.
+ *
+ * \param func The functor object to use in the IPv4ReassemblerProxy.
+ * \return An IPv4ReassemblerProxy.
+ */
+template<typename Functor>
+IPv4ReassemblerProxy<Functor> make_ipv4_reassembler_proxy(Functor func) {
+    return IPv4ReassemblerProxy<Functor>(func);
+}
+}
+
+
+#endif // TINS_IP_REASSEMBLER_H

include/ipsec.h

@@ -0,0 +1,264 @@
+/*
+ * Copyright (c) 2014, Matias Fontanini
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ *   copyright notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef TINS_IPSEC_H
+#define TINS_IPSEC_H
+
+#include "pdu.h"
+#include "endianness.h"
+#include "small_uint.h"
+
+namespace Tins {
+/**
+ * \brief Represents an IPSec Authentication Header.
+ */
+class IPSecAH : public PDU {
+public:
+    /**
+     * This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::IPSEC_AH;
+
+    /**
+     * \brief Default constructor.
+     *
+     * The ICV field is initialized with four 0 bytes. The length
+     * field is initialized appropriately.
+     */
+    IPSecAH();
+    
+    /**
+     * \brief Constructs an IPSecAH object from a buffer and adds all 
+     * identifiable PDUs found in the buffer as children of this 
+     * one.
+     * 
+     * If there is not enough size for an IPSecAH header, a 
+     * malformed_packet exception is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    IPSecAH(const uint8_t *buffer, uint32_t total_sz);
+
+    // Getters
+
+    /**
+     *  \brief Getter for the Next header field.
+     *  \return The stored Next header field value.
+     */
+    uint8_t next_header() const {
+        return _header.next_header;
+    }
+
+    /**
+     *  \brief Getter for the Length field.
+     *  \return The stored Length field value.
+     */
+    uint8_t length() const {
+        return _header.length;
+    }
+
+    /**
+     *  \brief Getter for the Security Parameters Index field.
+     *  \return The stored Security Parameters Index field value.
+     */
+    uint32_t spi() const {
+        return Endian::be_to_host(_header.spi);
+    }
+
+    /**
+     *  \brief Getter for the Sequence number field.
+     *  \return The stored Sequence number field value.
+     */
+    uint32_t seq_number() const {
+        return Endian::be_to_host(_header.seq_number);
+    }
+    
+    /**
+     *  \brief Getter for the ICV field.
+     *  \return The stored ICV field value.
+     */
+    const byte_array &icv() const {
+        return _icv;
+    }
+
+    // Setters
+
+    /**
+     *  \brief Setter for the Next header field.
+     *  \param new_next_header The new Next header field value.
+     */
+    void next_header(uint8_t new_next_header);
+
+    /**
+     *  \brief Setter for the Length field.
+     *  \param new_length The new Length field value.
+     */
+    void length(uint8_t new_length);
+
+    /**
+     *  \brief Setter for the Security Parameters Index field.
+     *  \param new_spi The new Security Parameters Index field value.
+     */
+    void spi(uint32_t new_spi);
+
+    /**
+     *  \brief Setter for the Sequence number field.
+     *  \param new_seq_number The new Sequence number field value.
+     */
+    void seq_number(uint32_t new_seq_number);
+    
+    /**
+     *  \brief Setter for the ICV field.
+     *  \param new_icv The new ICV field value.
+     */
+    void icv(const byte_array &new_icv);
+
+    /**
+     * \brief Returns the header size.
+     *
+     * This metod overrides PDU::header_size. \sa PDU::header_size
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \sa PDU::clone
+     */
+    IPSecAH *clone() const {
+        return new IPSecAH(*this);
+    }
+private:
+    struct header {
+        uint8_t next_header, length;
+        uint32_t spi, seq_number;
+    };
+
+    void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *);
+    
+    header _header;
+    byte_array _icv;
+};
+
+/**
+ * \brief Represents an IPSec Authentication Header.
+ */
+class IPSecESP : public PDU {
+public:
+    /**
+     * This PDU's flag.
+     */
+    static const PDU::PDUType pdu_flag = PDU::IPSEC_ESP;
+
+    /**
+     * \brief Default constructor.
+     */
+    IPSecESP();
+    
+    /**
+     * \brief Constructs an IPSecESP object from a buffer and adds all 
+     * identifiable PDUs found in the buffer as children of this 
+     * one.
+     * 
+     * If there is not enough size for an IPSecESP header, a 
+     * malformed_packet exception is thrown.
+     * 
+     * \param buffer The buffer from which this PDU will be constructed.
+     * \param total_sz The total size of the buffer.
+     */
+    IPSecESP(const uint8_t *buffer, uint32_t total_sz);
+
+    // Getters
+    
+    /**
+     *  \brief Getter for the Security Parameters Index field.
+     *  \return The stored Security Parameters Index field value.
+     */
+    uint32_t spi() const {
+        return Endian::be_to_host(_header.spi);
+    }
+
+    /**
+     *  \brief Getter for the Sequence number field.
+     *  \return The stored Sequence number field value.
+     */
+    uint32_t seq_number() const {
+        return Endian::be_to_host(_header.seq_number);
+    }
+
+    // Setters
+
+    /**
+     *  \brief Setter for the Security Parameters Index field.
+     *  \param new_spi The new Security Parameters Index field value.
+     */
+    void spi(uint32_t new_spi);
+
+    /**
+     *  \brief Setter for the Sequence number field.
+     *  \param new_seq_number The new Sequence number field value.
+     */
+    void seq_number(uint32_t new_seq_number);
+
+    /**
+     * \brief Returns the header size.
+     *
+     * This metod overrides PDU::header_size. \sa PDU::header_size
+     */
+    uint32_t header_size() const;
+
+    /**
+     * \brief Getter for the PDU's type.
+     * \sa PDU::pdu_type
+     */
+    PDUType pdu_type() const { return pdu_flag; }
+
+    /**
+     * \sa PDU::clone
+     */
+    IPSecESP *clone() const {
+        return new IPSecESP(*this);
+    }
+private:
+    struct header {
+        uint32_t spi, seq_number;
+    };
+
+    void write_serialization(uint8_t *buffer, uint32_t total_sz, const PDU *);
+    
+    header _header;
+};
+}
+
+#endif // TINS_IPSEC_H

include/ipv6.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -60,7 +60,7 @@ public:
     /**
      * The type used to represent IPv6 extension headers.
      */
-    typedef PDUOption<uint8_t> ext_header;
+    typedef PDUOption<uint8_t, IPv6> ext_header;
     
     /**
      * The type used to store the extension headers.

include/ipv6_address.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/llc.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/loopback.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/macros.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -40,11 +40,13 @@
     #define TINS_END_PACK __pragma( pack(pop) )
     #define TINS_PACKED(DECLARATION) __pragma( pack(push, 1) ) DECLARATION __pragma( pack(pop) )
     #define TINS_DEPRECATED(func) __declspec(deprecated) func
+    #define NOEXCEPT
 #else
     #define TINS_BEGIN_PACK 
     #define TINS_END_PACK __attribute__((packed))
     #define TINS_PACKED(DECLARATION) DECLARATION __attribute__((packed))
     #define TINS_DEPRECATED(func) func __attribute__ ((deprecated))
+    #define NOEXCEPT noexcept
 #endif
 
 #endif

include/network_interface.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/packet.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -128,6 +128,13 @@ private:
  */
 class Packet {
 public:
+    /**
+     * Tag used to specify that a Packet should own a PDU pointer.
+     */
+    struct own_pdu {
+
+    };
+
     /**
      * \brief Default constructs a Packet.
      * 
@@ -144,6 +151,17 @@ public:
     Packet(const PDU *apdu, const Timestamp &tstamp) 
     : pdu_(apdu->clone()), ts(tstamp) { }
 
+    /**
+     * \brief Constructs a Packet from a PDU* and a Timestamp.
+     * 
+     * The PDU* will be owned by the Packet. This means you
+     * <b>do not</b> have to explicitly delete the pointer, that
+     * will be done automatically by the Packet when it goes out
+     * of scope.
+     */
+    Packet(PDU *apdu, const Timestamp &tstamp, own_pdu) 
+    : pdu_(apdu), ts(tstamp) { }
+    
     /**
      * \brief Constructs a Packet from a const PDU&.
      * 
@@ -197,14 +215,14 @@ public:
     /**
      * Move constructor.
      */
-    Packet(Packet &&rhs) noexcept : pdu_(rhs.pdu()), ts(rhs.timestamp()) {
+    Packet(Packet &&rhs) NOEXCEPT : pdu_(rhs.pdu()), ts(rhs.timestamp()) {
         rhs.pdu_ = nullptr;
     }
     
     /**
      * Move assignment operator.
      */
-    Packet& operator=(Packet &&rhs) noexcept { 
+    Packet& operator=(Packet &&rhs) NOEXCEPT { 
         if(this != &rhs) {
             std::swap(pdu_, rhs.pdu_);
             ts = rhs.timestamp();
@@ -268,7 +286,7 @@ public:
      * \return true if pdu() == nullptr, false otherwise.
      */
     operator bool() const {
-        return bool(pdu_);
+        return pdu_ ? true : false;
     }
     
     /**

include/packet_sender.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -87,7 +87,7 @@ namespace Tins {
              * \brief Move constructor.
              * \param rhs The sender to be moved.
              */
-            PacketSender(PacketSender &&rhs) noexcept {
+            PacketSender(PacketSender &&rhs) NOEXCEPT {
                 *this = std::move(rhs);
             }
             
@@ -95,7 +95,7 @@ namespace Tins {
              * \brief Move assignment operator.
              * \param rhs The sender to be moved.
              */
-            PacketSender& operator=(PacketSender &&rhs) noexcept {
+            PacketSender& operator=(PacketSender &&rhs) NOEXCEPT {
                 _sockets = std::move(rhs._sockets);
                 rhs._sockets = std::vector<int>(SOCKETS_END, INVALID_RAW_SOCKET);
                 #ifndef WIN32
@@ -310,7 +310,8 @@ namespace Tins {
             static_cast<T&>(pdu).send(*this, iface);
         }
         
-        PDU *recv_match_loop(int sock, PDU &pdu, struct sockaddr* link_addr, uint32_t addrlen);
+        PDU *recv_match_loop(const std::vector<int>& sockets, PDU &pdu, struct sockaddr* link_addr, 
+            uint32_t addrlen);
 
         std::vector<int> _sockets;
         #ifndef WIN32
@@ -324,6 +325,10 @@ namespace Tins {
         SocketTypeMap _types;
         uint32_t _timeout, _timeout_usec;
         NetworkInterface default_iface;
+        // In BSD we need to store the buffer size, retrieved using BIOCGBLEN
+        #if defined(BSD) || defined(__FreeBSD_kernel__)
+        int buffer_size;
+        #endif
     };
 }
 

include/packet_writer.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -76,7 +76,7 @@ public:
          * 
          * \param rhs The PacketWriter to be moved.
          */
-        PacketWriter(PacketWriter &&rhs) noexcept {
+        PacketWriter(PacketWriter &&rhs) NOEXCEPT {
             *this = std::move(rhs);
         }
         
@@ -88,7 +88,7 @@ public:
          * 
          * \param rhs The PacketWriter to be moved.
          */
-        PacketWriter& operator=(PacketWriter &&rhs) noexcept {
+        PacketWriter& operator=(PacketWriter &&rhs) NOEXCEPT {
             handle = 0;
             dumper = 0;
             std::swap(handle, rhs.handle);

include/pdu.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -65,6 +65,14 @@ namespace Tins {
          */
         typedef byte_array serialization_type;
 
+        /**
+         * The typep used to identify the endianness of every PDU.
+         */
+        enum endian_type {
+            BE,
+            LE
+        };
+
         /**
          * \brief Enum which identifies each type of PDU.
          *
@@ -119,9 +127,17 @@ namespace Tins {
             PPPOE,
             STP,
             PPI,
+            IPSEC_AH,
+            IPSEC_ESP,
             USER_DEFINED_PDU = 1000
         };
         
+        /**
+         * The endianness used by this PDU. This can be overriden
+         * by subclasses.
+         */
+        static const endian_type endianness = BE;
+
         /** 
          * \brief Default constructor.
          */
@@ -133,7 +149,7 @@ namespace Tins {
              * 
              * \param rhs The PDU to be moved.
              */
-            PDU(PDU &&rhs) noexcept 
+            PDU(PDU &&rhs) NOEXCEPT 
             : _inner_pdu(0)
             {
                 std::swap(_inner_pdu, rhs._inner_pdu);
@@ -144,7 +160,7 @@ namespace Tins {
              * 
              * \param rhs The PDU to be moved.
              */
-            PDU& operator=(PDU &&rhs) noexcept {
+            PDU& operator=(PDU &&rhs) NOEXCEPT {
                 std::swap(_inner_pdu, rhs._inner_pdu);
                 return *this;
             }
@@ -456,6 +472,34 @@ namespace Tins {
         *lop /= rop;
         return lop;
     }
+
+    namespace Internals {
+        template<typename T>
+        struct remove_pointer {
+            typedef T type;
+        };
+
+        template<typename T>
+        struct remove_pointer<T*> {
+            typedef T type;
+        };
+    }
+
+    template<typename T, typename U>
+    T tins_cast(U *pdu) {
+        typedef typename Internals::remove_pointer<T>::type TrueT;
+        return pdu && (TrueT::pdu_flag == pdu->pdu_type()) ?
+            static_cast<T>(pdu) :
+            0;
+    }
+
+    template<typename T, typename U>
+    T &tins_cast(U &pdu) {
+        T *ptr = tins_cast<T*>(&pdu);
+        if(!ptr)
+            throw bad_tins_cast();
+        return *ptr;
+    }
 }
 
 #endif // TINS_PDU_H

include/pdu_allocator.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/pdu_cacher.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without

include/pdu_option.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -32,10 +32,260 @@
 
 #include <vector>
 #include <iterator>
+#include <cstring>
+#include <algorithm>
+#include <string>
 #include <stdint.h>
 #include "exceptions.h"
+#include "endianness.h"
+#include "internals.h"
+#include "ip_address.h"
+#include "ipv6_address.h"
+#include "hw_address.h"
 
 namespace Tins {
+/**
+ * \cond
+ */
+template<typename OptionType, class PDUType>
+class PDUOption;
+
+namespace Internals {
+    template<typename T, typename X, typename PDUType>
+    T convert_to_integral(const PDUOption<X, PDUType> & opt) {
+        if(opt.data_size() != sizeof(T))
+            throw malformed_option();
+        T data = *(T*)opt.data_ptr();
+        if(PDUType::endianness == PDUType::BE)
+            data = Endian::be_to_host(data);
+        else
+            data = Endian::le_to_host(data);
+        return data;
+    }
+    
+    template<typename T, typename = void>
+    struct converter {
+        template<typename X, typename PDUType>
+        static T convert(const PDUOption<X, PDUType>& opt) {
+            return T::from_option(opt);
+        }
+    };
+    
+    template<>
+    struct converter<uint8_t> {
+        template<typename X, typename PDUType>
+        static uint8_t convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() != 1)
+                throw malformed_option();
+            return *opt.data_ptr();
+        }
+    };
+    
+    template<>
+    struct converter<uint16_t> {
+        template<typename X, typename PDUType>
+        static uint16_t convert(const PDUOption<X, PDUType>& opt) {
+            return convert_to_integral<uint16_t>(opt);
+        }
+    };
+    
+    template<>
+    struct converter<uint32_t> {
+        template<typename X, typename PDUType>
+        static uint32_t convert(const PDUOption<X, PDUType>& opt) {
+            return convert_to_integral<uint32_t>(opt);
+        }
+    };
+    
+    template<>
+    struct converter<uint64_t> {
+        template<typename X, typename PDUType>
+        static uint64_t convert(const PDUOption<X, PDUType>& opt) {
+            return convert_to_integral<uint64_t>(opt);
+        }
+    };
+
+    template<size_t n>
+    struct converter<HWAddress<n> > {
+        template<typename X, typename PDUType>
+        static HWAddress<n> convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() != n)
+                throw malformed_option();
+            return HWAddress<n>(opt.data_ptr());
+        }
+    };
+
+    template<>
+    struct converter<IPv4Address> {
+        template<typename X, typename PDUType>
+        static IPv4Address convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() != sizeof(uint32_t))
+                throw malformed_option();
+            const uint32_t *ptr = (const uint32_t*)opt.data_ptr();
+            if(PDUType::endianness == PDUType::BE)
+                return IPv4Address(*ptr);
+            else
+                return IPv4Address(Endian::change_endian(*ptr));
+        }
+    };
+
+    template<>
+    struct converter<IPv6Address> {
+        template<typename X, typename PDUType>
+        static IPv6Address convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() != IPv6Address::address_size)
+                throw malformed_option();
+            return IPv6Address(opt.data_ptr());
+        }
+    };
+    
+    template<>
+    struct converter<std::string> {
+        template<typename X, typename PDUType>
+        static std::string convert(const PDUOption<X, PDUType>& opt) {
+            return std::string(
+                opt.data_ptr(),
+                opt.data_ptr() + opt.data_size()
+            );
+        }
+    };
+    
+    template<>
+    struct converter<std::vector<float> > {
+        template<typename X, typename PDUType>
+        static std::vector<float> convert(const PDUOption<X, PDUType>& opt) {
+            std::vector<float> output;
+            const uint8_t *ptr = opt.data_ptr(), *end = ptr + opt.data_size();
+            while(ptr != end) {
+                output.push_back(float(*(ptr++) & 0x7f) / 2);
+            }
+            return output;
+        }
+    };
+    
+    template<typename T>
+    struct converter<std::vector<T>, typename enable_if<is_unsigned_integral<T>::value>::type> {
+        template<typename X, typename PDUType>
+        static std::vector<T> convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() % sizeof(T) != 0)
+                throw malformed_option();
+            const T *ptr = (const T*)opt.data_ptr();
+            const T *end = (const T*)(opt.data_ptr() + opt.data_size());
+            
+            std::vector<T> output(std::distance(ptr, end));
+            typename std::vector<T>::iterator it = output.begin();
+            while(ptr < end) {
+                if(PDUType::endianness == PDUType::BE)
+                    *it++ = Endian::be_to_host(*ptr++);
+                else
+                    *it++ = Endian::le_to_host(*ptr++);
+            }
+            return output;
+        }
+    };
+    
+    template<typename T, typename U>
+    struct converter<
+            std::vector<std::pair<T, U> >, 
+            typename enable_if<
+                is_unsigned_integral<T>::value && is_unsigned_integral<U>::value
+            >::type
+    > {
+        template<typename X, typename PDUType>
+        static std::vector<std::pair<T, U> > convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() % (sizeof(T) + sizeof(U)) != 0)
+                throw malformed_option();
+            const uint8_t *ptr = opt.data_ptr(), *end = ptr + opt.data_size();
+            
+            std::vector<std::pair<T, U> > output;
+            while(ptr < end) {
+                std::pair<T, U> data;
+                data.first = *(const T*)ptr;
+                ptr += sizeof(T);
+                data.second = *(const U*)ptr;
+                ptr += sizeof(U);
+                if(PDUType::endianness == PDUType::BE) {
+                    data.first = Endian::be_to_host(data.first);
+                    data.second = Endian::be_to_host(data.second);
+                }
+                else {
+                    data.first = Endian::le_to_host(data.first);
+                    data.second = Endian::le_to_host(data.second);
+                }
+                output.push_back(data);
+            }
+            return output;
+        }
+    };
+    
+    template<>
+    struct converter<std::vector<IPv4Address> > {
+        template<typename X, typename PDUType>
+        static std::vector<IPv4Address> convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() % 4 != 0)
+                throw malformed_option();
+            const uint32_t *ptr = (const uint32_t*)opt.data_ptr();
+            const uint32_t *end = (const uint32_t*)(opt.data_ptr() + opt.data_size());
+            
+            std::vector<IPv4Address> output(std::distance(ptr, end));
+            std::vector<IPv4Address>::iterator it = output.begin();
+            while(ptr < end) {
+                if(PDUType::endianness == PDUType::BE)
+                    *it++ = IPv4Address(*ptr++);
+                else
+                    *it++ = IPv4Address(Endian::change_endian(*ptr++));
+            }
+            return output;
+        }
+    };
+    
+    template<>
+    struct converter<std::vector<IPv6Address> > {
+        template<typename X, typename PDUType>
+        static std::vector<IPv6Address> convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() % IPv6Address::address_size != 0)
+                throw malformed_option();
+            const uint8_t *ptr = opt.data_ptr(), *end = opt.data_ptr() + opt.data_size();
+            std::vector<IPv6Address> output;
+            while(ptr < end) {
+                output.push_back(IPv6Address(ptr));
+                ptr += IPv6Address::address_size;
+            }
+            return output;
+        }
+    };
+    
+    template<typename T, typename U>
+    struct converter<
+            std::pair<T, U>, 
+            typename enable_if<
+                is_unsigned_integral<T>::value && is_unsigned_integral<U>::value
+            >::type
+    > {
+        template<typename X, typename PDUType>
+        static std::pair<T, U> convert(const PDUOption<X, PDUType>& opt) {
+            if(opt.data_size() != sizeof(T) + sizeof(U))
+                throw malformed_option();
+            std::pair<T, U> output;
+            std::memcpy(&output.first, opt.data_ptr(), sizeof(T));
+            std::memcpy(&output.second, opt.data_ptr() + sizeof(T), sizeof(U));
+            if(PDUType::endianness == PDUType::BE) {
+                output.first = Endian::be_to_host(output.first);
+                output.second = Endian::be_to_host(output.second);
+            }
+            else {
+                output.first = Endian::le_to_host(output.first);
+                output.second = Endian::le_to_host(output.second);
+            }
+            return output;
+        }
+    };
+}
+
+/**
+ * \endcond
+ */
+
 /**
  * \class PDUOption
  * \brief Represents a PDU option field.
@@ -46,17 +296,13 @@ namespace Tins {
  * 
  * The OptionType template parameter indicates the type that will be
  * used to store this option's identifier.
- * 
- * The Container template parameter indicates the container which will
- * be used to store this option's data. The container <b>must</b>
- * store data sequentially. std::vector<uint8_t> is the default
- * container.
  */
-template<typename OptionType, class Container = std::vector<uint8_t> >
+template<typename OptionType, class PDUType>
 class PDUOption {
+private:
+    static const int small_buffer_size = 8;
 public:
-    typedef Container container_type;
+    typedef uint8_t data_type;
-    typedef typename container_type::value_type data_type;
     typedef OptionType option_type;
 
     /**
@@ -66,8 +312,79 @@ public:
      * \param data The option's data(if any).
      */
     PDUOption(option_type opt = option_type(), size_t length = 0, const data_type *data = 0) 
-    : option_(opt), size_(length), value_(data, data + (data ? length : 0)) {
+    : option_(opt), size_(length) {
+        set_payload_contents(data, data + (data ? length : 0));
+    }
     
+    /**
+     * \brief Copy constructor.
+     * \param rhs The PDUOption to be copied.
+     */
+    PDUOption(const PDUOption& rhs) {
+        real_size_ = 0;
+        *this = rhs;
+    }
+    
+    #if TINS_IS_CXX11
+    /**
+     * \brief Move constructor.
+     * \param rhs The PDUOption to be moved.
+     */
+    PDUOption(PDUOption&& rhs) {
+        real_size_ = 0;
+        *this = std::move(rhs);
+    }
+    
+    /**
+     * \brief Move assignment operator.
+     * \param rhs The PDUOption to be moved.
+     */
+    PDUOption& operator=(PDUOption&& rhs) {
+        option_ = rhs.option_;
+        size_ = rhs.size_;
+        if(real_size_ > small_buffer_size) {
+            delete[] payload_.big_buffer_ptr;
+        }
+        real_size_ = rhs.real_size_;
+        if(real_size_ > small_buffer_size) {
+            payload_.big_buffer_ptr = nullptr;
+            std::swap(payload_.big_buffer_ptr, rhs.payload_.big_buffer_ptr);
+            rhs.real_size_ = 0;
+        }
+        else {
+            std::copy(
+                rhs.data_ptr(),
+                rhs.data_ptr() + rhs.data_size(),
+                payload_.small_buffer
+            );
+        }
+        return *this;
+    }
+    
+    #endif // TINS_IS_CXX11
+    
+    /**
+     * \brief Copy assignment operator.
+     * \param rhs The PDUOption to be copied.
+     */
+    PDUOption& operator=(const PDUOption& rhs) {
+        option_ = rhs.option_;
+        size_ = rhs.size_;
+        if(real_size_ > small_buffer_size) {
+            delete[] payload_.big_buffer_ptr;
+        }
+        real_size_ = rhs.real_size_;
+        set_payload_contents(rhs.data_ptr(), rhs.data_ptr() + rhs.data_size());
+        return *this;
+    }
+    
+    /**
+     * \brief Destructor.
+     */
+    ~PDUOption() {
+        if(real_size_ > small_buffer_size) {
+            delete[] payload_.big_buffer_ptr;
+        }
     }
     
     /**
@@ -80,8 +397,8 @@ public:
      */
     template<typename ForwardIterator>
     PDUOption(option_type opt, ForwardIterator start, ForwardIterator end) 
-    : option_(opt), size_(std::distance(start, end)), value_(start, end) {
+    : option_(opt), size_(std::distance(start, end)) {
-        
+        set_payload_contents(start, end);
     }
     
     /**
@@ -101,8 +418,8 @@ public:
      */
     template<typename ForwardIterator>
     PDUOption(option_type opt, size_t length, ForwardIterator start, ForwardIterator end) 
-    : option_(opt), size_(length), value_(start, end) {
+    : option_(opt), size_(length) {
-        
+        set_payload_contents(start, end);
     }
     
     /**
@@ -131,7 +448,9 @@ public:
      * \return const data_type& containing this option's value.
      */
     const data_type *data_ptr() const {
-        return &*value_.begin();
+        return real_size_ <= small_buffer_size ?
+            payload_.small_buffer : 
+            payload_.big_buffer_ptr;
     }
     
     /**
@@ -140,7 +459,7 @@ public:
      * This is the actual size of the data.
      */
     size_t data_size() const {
-        return value_.size();
+        return real_size_;
     }
     
     /**
@@ -158,10 +477,45 @@ public:
     size_t length_field() const {
         return size_;
     }
+    
+    /**
+     * \brief Constructs a T from this PDUOption.
+     * 
+     * Use this method to convert a PDUOption to the specific type that
+     * represents it. For example, if you know an option is of type
+     * PDU::SACK, you could use option.to<TCP::sack_type>().
+     */
+    template<typename T>
+    T to() const {
+        return Internals::converter<T>::convert(*this);
+    }
 private:
+    template<typename ForwardIterator>
+    void set_payload_contents(ForwardIterator start, ForwardIterator end) {
+        real_size_ = std::distance(start, end);
+        if(real_size_ <= small_buffer_size) {
+            std::copy(
+                start,
+                end,
+                payload_.small_buffer
+            );
+        }
+        else {
+            payload_.big_buffer_ptr = new data_type[real_size_];
+            std::copy(
+                start, 
+                end,
+                payload_.big_buffer_ptr
+            );
+        }
+    }
+
     option_type option_;
-    uint16_t size_;
+    uint16_t size_, real_size_;
-    container_type value_;
+    union {
+        data_type small_buffer[small_buffer_size];
+        data_type* big_buffer_ptr;
+    } payload_;
 };
 } // namespace Tins
 #endif // TINS_PDU_OPTION_H

include/ppi.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -85,7 +85,7 @@ public:
      *  \return The stored length field value.
      */
     uint16_t length() const {
-        return _header.length;
+        return Endian::le_to_host(_header.length);
     }
 
     /**
@@ -93,7 +93,7 @@ public:
      *  \return The stored Data Link Type field value.
      */
     uint32_t dlt() const {
-        return _header.dlt;
+        return Endian::le_to_host(_header.dlt);
     }
 
     /**

include/pppoe.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012, Matias Fontanini
+ * Copyright (c) 2014, Matias Fontanini
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -72,7 +72,7 @@ public:
     /**
      * The type used to store a TLV option.
      */
-    typedef PDUOption<TagTypes> tag;
+    typedef PDUOption<TagTypes, PPPoE> tag;
     
     /**
      * The type used to store the options.
@@ -90,6 +90,8 @@ public:
         
         vendor_spec_type(uint32_t vendor_id = 0, const data_type &data = data_type())
         : vendor_id(vendor_id), data(data) { }
+        
+        static vendor_spec_type from_option(const tag &opt);
     };
     
     /**
@@ -397,19 +399,11 @@ private:
     }
     
     template<typename T>
-    T retrieve_tag_iterable(TagTypes id) const {
+    T search_and_convert(TagTypes id) const {
-        const tag *tag = search_tag(id);
+        const tag *t = search_tag(id);
-        if(!tag)
+        if(!t)
             throw option_not_found();
-        return T(tag->data_ptr(), tag->data_ptr() + tag->data_size());
+        return t->to<T>();
-    }
-
-    template<template <typename> class Functor>
-    const tag *safe_search_tag(TagTypes opt, uint32_t size) const {
-        const tag *option = search_tag(opt);
-        if(!option || Functor<uint32_t>()(option->data_size(), size))
-            throw option_not_found();
-        return option;
     }
 
     TINS_BEGIN_PACK